12 Feb
2021
12 Feb
'21
6:08 a.m.
On Feb 12, 2021, at 7:50 AM, Jules Richardson via
cctalk <cctalk at classiccmp.org> wrote:
Hi all,
Hopefully the following link works, but someone over on one of the Facebook vintage
groups has this oddball terminal from 1973 that they've been looking for any
information on:
https://drive.google.com/drive/folders/1-2uEFbi3OKBYr06y6yHnygDiLMtw2Qkj
... it's somewhat unconventional in that half the CRT is hidden from view within the
machine, i.e. it only actually displays the top half of the display to the user - I've
no idea if that's because it had a specific application where space was limited, or if
it was simply that memory at the time was horribly expensive and so it was designed to
only use a few lines (I know some vendors did that, although I think they typically
presented the whole CRT and at least had the option of RAM upgrade to more lines).
The blower assembly seems a little on the homebrew side, but on the other hand the PCBs
and case construction make it seem like a professional product.
The owner says the only label anywhere on the thing is the one on the CRT saying
"Mfd in Japan for Conrac", but that's presumably just the CRT itself and not
the entire machine.
I remember Conrac as a well known CRT maker from that time. I think they were used in
PLATO III terminals (mid 1960s).
I don't believe there's anything resembling a
microprocessor in the system, it's all just TTL logic (the large white ceramic IC is
an ACIA).
Oh, I believe the owner's in Canada, so it may be it was made there and never
exported to other parts of the world.
cheers
Jules
The photos are not particularly helpful; they show parts of the device but not close
enough to tell the details, while much of the case is not shown. Is there any
manufacturer label or serial number tag on the case?
One of those boards is full of rather sloppy ECO wires, which makes it feel like a home
made job, but the rest look like decent quality commercial pieces. And yes, the blower is
rather curious, it's hard to see how a device like this might dissipate enough power
to need that kind of air mover.
paul