I'm trying to get my 11/94 running. Its a hybrid having both Q
and Unibus. The CPU card has a KDJ11-E
18Mhz processor with 4Mb ram and six serial ports plus the console on
board. Apart from a voltage monitor card
that's all there is in the Qbus section.
Between the Q and Unibus sections is a special convertor card (KTJ-11B
After the KTJ-11B I have one slot with an RX211 8in floppy controller in
All of the other slots have bus grant cards except the last one that has
a terminator card and a MLM card.
On switch on the console display comes up. Whilst it performs the same
functions as the one in the manual
it looks different. What ever I do by way of setting up devices I can't
get it to talk to the RX211.
it just says No Controller.