I am wondering if I have racked my 11/24 correctly.
As you can see here:
I have put the
CPU at the top and the two RL02 drives underneath.
The problem is that the CPU enclosure catches on the RL02 underneath. There
is a bit of play in the mounting bracket:
a bit of manipulation I can get the CPU to slide in. However, I am wondering
if I have racked it correctly? I don't think there is room to move the RL02s
down and it would presumably leave a bit of a gap below the CPU. There seems
to be very little clearance between the CPU and the RL02 at the front but
more at the back, but I am sure that the rails are mounted horizontally. Is
it just a matter of tightening the big screws that hold the mounting
brackets to stop the play? If so I am not sure I have a big enough