23 May
2021
23 May
'21
10:37 a.m.
On 2021-05-21 16:38, Zane Healy via cctalk wrote:
Is anyone familiar with the 4000/90 diagnostics? It
looks like it will fail the test of the LCSPX graphics board, if it?s not plugged into a
monitor, or is missing a loopback device. Is that correct?
T 2 fails, but the manual makes it sound like I need a loopback
IIRC, it is normal that it fails, without a monitor attached.
Did you try to switch to serial console, if it still complains?
T 100 succeeds when testing the LCSPX graphics board.
If you have amonitor attached, you would see some colors flipping and
some drawing being made on the screen
The system had been a boat anchor until a short time ago, as the battery in the Dallas
DS1287A RTC was dead. Amazon just delivered two DS12887?s. Once I replaced it, it came
right up. I was surprised to see I had a 4GB and a 2GB drive in it.
Which ones did you get? (source?)
Have to fix another two in the near future ...
Now to dig out the mouse, and wait for the parts to hook it up to a monitor. :-)
Yes, the monitor cable is fun to look for ...
Cheers!