1 May
2012
1 May
'12
8:38 a.m.
Holm Tiffe wrote:
David Riley wrote:
Hmm, it seems to work w/o Problems:
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: MAP
15.206 MHz
CPU Options: FPA
Memory Map
Starting Ending Size in CSR CSR Bus
Address address K Bytes address type type
00000000 - 07777776 2048 17772102 ECC PMI
Press the RETURN key when ready to continue
I don't have tried to boot something, the disk currently in the system
is Quasiarus Unix for the VAX. I'll at least try to boot an RSX11 install
tape....
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: B MU0
Trying MU0
Starting system from MU0
RSX-11M/RSX-11M-PLUS Standalone Copy System V03
RSX-11M/RSX-11M-PLUS Standalone Configuration and Disk Sizing Program
Valid switches are:
/CSR=nnnnnn to change the default device CSR
/VEC=nnn to change the default device vector
/FOR=n to change the default magtape formatter number
/DEV to list all default device CSR and vectors
Enter first device:
Ok, Since I dont want to install now, I'm stopping here.
It seems really like that it is working.
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
On May 1, 2012, at 10:05 AM, Holm Tiffe wrote:
Hmm, on my Board are 2 ROMs Handlabeled to 395E5 and 396E5 KDJ11-B V9.
The ROMs shouldn't be a problem if the rest of the Hardware can do PMI..
Regards,
Holm
--
Hi,
I've got an BA23 Box with an M8190-AB lately (from Henk, special thanks to
you!).
The M8190-AB should be an KDJ11-BB 11/73 CPU. I have an MSV11-JE (M8637-E)
PMI Memory Card too and I'm wondering if I can use them thogether..
As far as I've read it should be possible if I put the memory below the
CPU, using it as plain Q-BUS memory this way. Can anyone confirm this?
What will happen if I put the Memory board at top in the PMI Order?
What are the differences from the KDJ11-BB to the KDJ11-BF? Are there
pictures to look at somwhere on the net? All I have found for KDJ11-BF with
google is exactly looking like my 11/73 CPU Board....
Surely someone more knowledgeable than I will respond, but I recall
that the primary difference (if indeed there were any others) between
the KDF11-Bx boards was the boot ROM installed. I think the -BA may
have had a slightly different set of components than the subsequent
models (which were intended for the BA23 and had a nicer cable kit),
but I may be misremembering that as well.
- Dave