25 Mar
2016
25 Mar
'16
3:16 p.m.
Rob, many of your messages are blank.
Dwight
________________________________________
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Robert Jarratt
<robert.jarratt at ntlworld.com Sent: Friday, March
25, 2016 2:25 PM
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: Olivetti M24 Mounting Bushes for Bus Converter
I have posted the pictures here:
https://onedrive.live.com/redir?resid=FC758A5A91B91301!5776&authkey=!AO…
8p_qyB5Q&ithint=folder%2cjpg
The pictures show three things:
1. The square holes that the mountings go into.
2. The top and bottom side of the steel mountings.
3. The top and bottom sides of the nylon (?) mountings.
I find myself to really need the steel mountings to be able to mount the bus
converter, I am hopeful that I can move a couple of existing nylon ones.
Regards
Rob
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Fred
Cisin
Sent: 25 March 2016 19:10
To: General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org Subject: RE:
Olivetti M24 Mounting Bushes for Bus Converter
metal,
I looked up rivnuts and they certainly look
similar. They are
definitely not standoffs though. I shall look closer at rivnuts.
also look at nutserts.
Riv-nuts are pop-rivets with a threaded center. Usable through sheet and into blind holes (very carefully) Nutserts call
for drilling and
threading a
hole and screwing them in.
I'm assuming that you are talking about threaded inserts in a plastic
piece?