31 Mar
2005
31 Mar
'05
5:23 p.m.
I can get the screws and washers and send them to you for the cost of
postage if you can't find them there but I'm in the US so postage will cost
a few bucks depending on how fast you want them. Do you need any nuts or
anything to go with them?
Joe
At 01:04 AM 4/1/05 +0100, you wrote:
In message <3.0.6.32.20050331171526.007a2980 at
pop-server.cfl.rr.com>
"Joe R." <rigdonj at cfl.rr.com> wrote:
[ PET GPIB book ]
> Here's one for $9.67
>
<http://dogbert.abebooks.com/servlet/SearchResults?bx=off&sts=t&ds=30&bi=0&k
n=PET++IEEE-488&sortby=2>. I don't know what that is in pounds but it is
located in the UK, if it had been in the US I would have bought it already.
About ?5 plus postage. Not a significant amount less than what I paid for
the copy I've got on order.
[ 10-32 bolts ]
What kind, spiral, internal teeth, external
teeth or ? I have tons of
that stuff. Good aerospace quality parts that I get from taking military
surplus equipment apart.
I need a minimum of 10x 10-32 UNF threaded bolts (aka "machine screws"),
3/8in length (or 1/2in) and locking washers. I have absolutely no idea what
type of washer, but I'd guess it would be the variety with internal teeth.
Basically I just need enough 10-32 bolts to hook five of these capacitors up.
The problem being that 10-32 is a standard size in the USA, but apparently
not in the UK.
"I love industry standards. Everyone should have one."
Thanks.
--
Phil. | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem at philpem.me.uk | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.me.uk/ | 48xCD, ARCINv6c IDE, SCSI
... Procrastination means never having to say you're sorry.