RL02 hook up to 11/04

On Thu, Dec 14, 2017 at 2:18 PM, william degnan <billdegnan at gmail.com <mailto:billdegnan at gmail.com>> wrote: On Thu, Dec 14, 2017 at 2:10 PM, william degnan <billdegnan at gmail.com <mailto:billdegnan at gmail.com>> wrote: On Thu, Dec 14, 2017 at 10:59 AM, John Welch via cctalk <cctalk at classiccmp.org <mailto:cctalk at classiccmp.org>> wrote: Now that I have the 11/04 running the next step is to hook up to the RL02. I need to run a cable from the M7762 to one of the connectors on the back of the RL02.? I have cabling stripped from a 11/04. Is there a terminator that goes on the other connector on the RL02? The machine that was stripped actually was a RL01, I hope the cable is the same and if not someone will be able to advise me on that. Do I need to set any jumpers on the M7762? Are there any other things I should do the the RL02 prior to plugging it into the wall and powering it on? Sincerely, John Welch Assuming you have a bridge adapter that goes between the flat cable and the drive cable.? The bottom drive port should be terminated if you're not connecting to a 2nd drive.? Here is how I learned what I needed: http://www.pdp-11.nl/peripherals/disk/rl-info.html <http://www.pdp-11.nl/peripherals/disk/rl-info.html> Bill The ROM part number should be?751A9, if you're using a 9312, that's the ROM for the RL01/RL02. The command is DL0 or DL1.? If you use "DL" it assumes drive 0.? You can boot off of any drive however.? You can install the ROM in any slot. Bill Sorry...any of the 4 bootstrap ROM sockets.? (not slot *banging head against cabinet*) b