27 Jul
2019
27 Jul
'19
1:50 p.m.
On Wed, 2019-07-24 at 21:24 -0400, Pete Rittwage wrote:
I did some lookup on the reflow temperatures for various solder
materials because my gut told me 250 degrees is too low to do any good.
Turns out this is so. 250 CELCIUS maybe, but Fahrenheit? not.
https://www.google.com/search?q=melting+point+of+solder&tbm=isch&so…
:
Here's a link to that information. It looks like 220 Celciums is about
right. So if you were in Fahrenheit then that would explain the total
failure of the experiment and make it worth retrying.
RSVP
YHOSvt.
** TNM **
I tried this a year or two back with about 30 x SID, VIC, and PLA
chips
out of C64's. I heated them in the oven at about 250 for 15 minutes.
None of them showed any more signs of life than before I tried it,
unfortunately.