25 Jan
2010
25 Jan
'10
1:37 p.m.
-----Oorspronkelijk bericht-----
Van: cctalk-bounces at classiccmp.org
[mailto:cctalk-bounces at classiccmp.org] Namens Tony Duell
Verzonden: maandag 25 januari 2010 20:29
Aan: cctalk at classiccmp.org
Onderwerp: Re: Recurring subject: Goo removal
down as a
I'm using silicone degreaser, it's a special degreaser you use before you're
goint to spray paint to remove solicone's and other grease frations.
It's very effective.
-Rik
On Sun, 2010-01-24 13:06:33 -0800, Chuck Guzis
<cclist at sydex.com>
wrote:
> Upon opening up the unit, I discovered that
the rubber
rollers that
manipulate the magazine as well those that actually feed the
cassette had turned to black goo and spread it all over the place.
I'm facing a similar problem. The rubber feets of some of my
DECstations and VAXstations got somewhat "fluid" and rinsed sticky, black drop. Very nasty stuff :(
Any idea how to solve that sticky stuff away?
The printer platten roller in my HP9820 turned to a sticky
black goo and dripped (litereally_ onto the printer driver
PCB. I cleaned it up using propan-2-ol (not very effective),
lighter fluid (naphtha, rather more
effetive) and a lot of elbow grease. It wasn't perfect at the
end, but it was a lot betterm good enough to let me replace
the roller and get the printer prining again.
-tony