19 Aug
2021
19 Aug
'21
7:29 a.m.
On Thu, Aug 19, 2021, 7:33 AM Bill Gunshannon <bill.gunshannon at hotmail.com wrote:
Networking seems to have been added in 3.0 looking at the SPD.
And I have patches to V7 date for this I've been using with Venix on my
Rainbow.
Wish we had a list for Ultrix-11 specifically. Might be a lot of fun.
Maybe :)
Warner
bill
On 8/18/21 11:42 PM, Warner Losh wrote:
<http://www.cimmeri.com/js/download/ultrix-11/
So, anybody got a system running from that tape yet?
(Other than me :-)
Does this count? I named it bill because I wasn't sure which version it
was :)
And I did it from tape, not RX-50s and swapping 31 of them in/out with
simh... And I couldn't get 11/73 to work (I think my simh has a regression
I'm using the latest from github, so maybe I've found a regression.
On Wed, Aug 18, 2021 at 6:11 PM Bill Gunshannon via cctalk
<cctalk at classiccmp.org <mailto:cctalk at classiccmp.org>> wrote:
On 8/16/21 2:55 PM, js--- via cctalk wrote:
and
On 8/15/2021 10:08 AM, Bill Gunshannon via cctalk wrote:
> On 8/15/21 12:45 AM, Warner Losh via cctalk wrote:
> >>
Distributions/DEC/Ultrix-11/Fred-Ultrix3 in the tuhs archive has
>> complete
>> instructions as well as a program to build the ultrix tapes
>
> It took a day because I wanted to test it but I have a TK50
image
that
>> works with SIMH. I did an install on an 11/73 with 3M of memory > two
RD54's. Worked fine. It's been a while since I did any
Ultrix-11
> on real or simulated hardware.
> Have no idea how to get this tape to
anyone. It's just shy of
4M. Not
> sure if it could be emailed. The SIMH ini
file is trivially
simple but
> I could provide that as well.
> I have nowhere I could put it up for
download. I don't do
things like
> Google Drive. Maybe we need a GITHUB site or
something for
Ultrix stuff.
bill
Bill's file is at:
http://www.cimmeri.com/js/download/ultrix-11/ there), but 11/83 worked just fine.
Interesting. In the last couple days I have done 11/73, 11/83 and
11/44. All worked fine.
ULTRIX-11 System V3.1 (bill)
login: root
Welcome to the ULTRIX-11 System
erase = delete, kill = ^U, intr = ^C
bill# uname -a
ULTRIX-11 bill 3 0 PDP-11/83
bill# df
Filesystem total kbytes kbytes percent
node kbytes used free used Mounted on
/dev/rd00 4654 3076 1578 66% /
/dev/rd01 8302 7708 594 93% /usr
bill#
test1# uname -a
ULTRIX-11 test1 3 0 PDP-11/44
test1# df
Filesystem total kbytes kbytes percent
node kbytes used free used Mounted on
/dev/ra00 4606 3080 1526 67% /
/dev/ra01 9598 2848 6750 30% /usr
/dev/ra03 423041 8773 414268 2% /user1
/dev/ra17 440941 3678 437263 1% /user2
/dev/ra27 440941 2 440939 0% /user3
/dev/ra37 440941 6 440935 0% /user4
test1# dmesg
Feb 14 09:00
...
ULTRIX-11 Kernel V3.1
realmem = 3932160
buffers = 25600
clists = 1600
usermem = 3772992
maxumem = 212992
But I did something wrong... It prompts me for
the load device on each
reboot.
Nothing wrong it does that. I don't think it goes away until after
you build a new custom kernel. You will need that for networking
anyway. Hope your good with overlays. :-)
sim> boot rq0
Sizing Memory...
Boot: rd(0,0)unix (CTRL/C will abort auto-boot)
Load device (? for help, <RETURN> if none) < ht tm ts tk rx rl rc > ? tk
rd(0,0)unix:
14784+17024+8192+8000+8064+8000+8064+8128+8000+7808+7936+7936+7680+7360+1344
ULTRIX-11 Kernel V3.1
...
(and I think my simh is a bit wonky because it doesn't quite work: it
hangs from time to time, but only after a reset)
Mine has been stable so far. Doesn't really get unstable till you
add networking. :-)
I am running on this: PDP-11 simulator V3.8-1
Now that people have made me interested again I think it's time
to get the source loaded and look into what it takes to build
install kits on other media.
I never really did much with Ultrix-11 on SIMH, mostly on real
hardware. That's where I did all the testing when I first figured
out how to take the files from the archive and build a tape. The
original was TS02 but I later used Fred's setup to make the TK50.
Being as this is the only OS that can legally be used I would
expect more activity. First thing is to try and find my improved
date command that lets you set dates after 1999. :-)