Wanted - copy of HP E2450-17504 Symbol Utility (for HP 16500B)

Hi, As some of you may be aware, I managed to hose the OS on my 16500B while trying to upgrade to the latest software. I've now got the analyser booting again, and it seems to be working more or less OK. Unfortunately (for me) it seems my backup (done with Filezilla, i.e. FTP) is totally duff -- apparently I had FZ set to "transfer files with no extension as ASCII", which has naturally hosed just about all the System, Driver and Extension files. Which means I've lost the E2450 Symbol Utility software. Bit of a pain when you want to use the analyser to debug microprocessor code. Seeing as there are a few folk here with 16500B analysers, I was wondering if I could ask a small favour... I need a copy of the Symbol Utility install floppy, HP part number E2450-17504, aka "Symbol Utility for HP16500B/C/CS". It should be either a normal 1.44MB DOS format floppy, or a HP LIF floppy (more likely DOS than LIF). If there's anyone on here with a copy of this disk (possibly stashed away in the manuals folder for their 16500B analyser), could I possibly ask for an image of it? Almost anything is fine; I'd prefer something reasonably standard though -- WinImage .IMA, ImageDisk, or even a raw "dd if=/dev/fd0 of=imagefile" (rawrite) dump. For what it's worth, I had V3.02 installed, but I suspect I might need something a little more recent now the analyser is running the V3.14 operating system. Thanks, -- Phil. classiccmp at philpem.me.uk http://www.philpem.me.uk/