RA81 Rides Again! More problems.u

On Sat, 23 Aug 1997, Tim Shoppa wrote: And we're off! Every little bit I can come up with. The system is in two cabinets. Two BA11s. I have an RA81 for the boot drive, two TU58s in the main cabinet, the console terminal (A Wyse 30 for now), and a real funny plug in the system case. 3 rows of wires in a printer-style plug. LP11? BA11 #1: This is the system box, BTW. The one whose power cord I hacked up. The DEC power cord is 120VAC, 1 phase, etc etc. But it has a sideways pin. So I whacked the end off a PC cable, soldered the appropriate pin to the appropriate wire, and plugged her in. It worked. The power controller plug was too wierd to mess with. Slot 1 M7090 2 Empty 3 M7093 4 M7094 5 M7095 6 M7096 7 M7097 8 M7098 9 M8743 BF 10 M8722 BB 11 M8722 BB 12 M8722 BC 13 Grant Contnuity jumper 14 M9202 and GCJ 15 other end of M9202 and GCJ 16 M8719 17 M8719 18 M7258 19 M7297 and M7296 20 Unlabled 21 Same 22 M5904 23 M5904 24 M5904 25 GCJ 26 M9300 and GCJ 27 Bus extender ribbons and GCJ Raised the BA11 and checked out the backplane. Looks fine. BA11 #2 1 Other end of bus extender and GCJ 2 M8719 3 M8719 4 M920 and GCJ 5 Other end and M7297 and M7296 6 M7295 7 M7294 8 M5904 9 M5904 10 M5904 11 M9300 and GCJ 12 M9300 and GCJ 13 M9202 and GCJ 14 other end and GCJ 15 M7486 16 M7485 17 GCJ Not even booting? And when it does boot, I get LP0: device not interrupting - disabled or something like that