I've looked ath Rik's photos of his display module (on Flickr), and it is
the same as the display in both my integrals.
BTw, the heatsink in the middle of the PCB comes off by undoing the
obvious screw (it's tapped into a boss on the plastic fream, there's no
nut or anything to worry about). Under the end of the heatsink is that
gate array chip I mentiuoned. If you want to remove the PCB altogether,
you take off the hatsink, unplug the 4 eibbon tails from the PCB
connectors and remove the remaining 4 screws, which have plastic washers
under the heads.
-tony