13 Dec
2006
13 Dec
'06
10:33 a.m.
In article <457FB813.4030008 at gjcp.net>,
Gordon JC Pearce <gordon at gjcp.net> writes:
Ethan Dicks wrote:
Yeah, I like that idea. If you're going that route, you might as well
go whole hog and create a board that goes straight into the VT
backplane.
--
"The Direct3D Graphics Pipeline" -- DirectX 9 draft available for download
<http://www.xmission.com/~legalize/book/download/index.html>
Legalize Adulthood! <http://blogs.xmission.com/legalize/>
On 12/13/06, Fred Cisin <cisin at
xenosoft.com> wrote:
Sort of requires that the VT220 works and has a keyboard, but yeah - it
*would* be good.
Could you make up a sticker for the front (stencil?) and label it
"DECMate IV"? On Tue,
2006-12-12 at 14:52 -0700, Richard wrote:
> Has anyone taken 'classic' terminal enclosures and put a Mini-ITX PC
> inside? I was thinking an appropriately sized LCD display and the
ITX
> > mobo and possibly a CD-ROM drive. Put an Ampro little board and floppy drive in
it,
and call it a VT220 CP/M computer :-)
Or an SBC6120 and make into an all-in-one PDP-8 with a handle ;-)