Here is what the quick reference says:
The fuser is improperly seated
The connector J201 is improperly connected
- reseat the connector j201 on the sensor PCA
The SW 101 is disengaged
- Check the SW101 to make sure it is engaged with the top cover
A temporary error has occurred
- Turn the printer off. Short the DC controller CP005 to bypass the
Error 50 time delay
You can turn the power off and wait 20 minutes instead of
shorting the cap.
It is basically an error that says the fuser isn't getting hot
within the specified time. It could be a bad fuser heater.
Date: Tue, 10 Jun 2008 08:59:40 -0700
From: ian_primus at yahoo.com
To: cctalk at classiccmp.org
Subject: Re: HP IIISi: "50 SERVICE"
--- On Tue, 6/10/08, Mr Ian Primus wrote:
have the manual, or at least have some idea
means I need to do?
I think I have a PDF manual, I'll see if I can dig it
up. Contact me off list.
Gah. I just checked the file server - I don't have the manual handy in PDF. All I had
was a user's guide. (pretty useless - "To load paper, remove paper
cassette..") When I'm back at the office I'll check the shelf. I must have it
in dead tree format. Some of the early HP manuals I have were spiral bound, would be hell
Anyone have it in PDF for our friend?
Search that pays you back! Introducing Live Search cashback.