18 Jul
2014
18 Jul
'14
3:24 p.m.
Rob,
I now have a "new to me" SBC6120 from Ulrich up and running using an
"old"
Qume terminal with VT102 emulation. Do you think it would be of interest to
the folks at DEC legacy or does every one have one? I will take it to the
next Manchester Vintage Club meet at the end of the month.
What does one call an SBC6120 btw. The Harris CPU is I guess "Vintage" as it
seems to date from pre- 1990 but the board is modern, its not a "clone" as
such is it? Or a replica or reproduction?
Dave
G4UGM
P.S. if any one has any SBC6120 add-ons they are willing to sell or swap I
am interested...
-----Original Message-----
From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org]
On Behalf Of Robert Jarratt
Sent: 18 July 2014 09:16
To: 'General Discussion: On-Topic and Off-Topic Posts';
cctech at classiccmp.org
Subject: RE: PDP8 Omnibus to usb interface
-----Original Message-----
From: cctalk-bounces at classiccmp.org
[mailto:cctalk-bounces at classiccmp.org]
On Behalf Of Stephen Laurence
Sent: 17 July 2014 12:23
To: cctech at classiccmp.org
Subject: PDP8 Omnibus to usb interface
Dear Phillip,
I came across your correspondence regarding an interface card to the
PDP8 Omnibus.
Did anything come of this and if so, are there any cards left?
Stephern Laurence, Preston, UK
(Owner of 4 non-working PDP8s but I hope to get them going!)
--
Using Opera's mail client: http://www.opera.com/mail/
When you get them working do let the list know. I only live in Stockport and
would love to see them working. You should bring them along to the next DEC
Legacy (whenever that will be), working or not.
What are the problems with your machines, power supplies, logic?
Regards
Rob