Installing an operating system on the 11/83 - update.

I read that you can indeed use a standard 1.2 Meg drive and that you can also use DSHD 5.25 disks in place of RX50s. Is there any truth in this? If there is it will be much easier and cheaper to make disks for my Rainbow. Sent from my Verizon, Samsung Galaxy smartphone Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Warner Losh via cctalk <cctalk at classiccmp.org> Sent: Tuesday, February 22, 2022 6:42:38 PM To: js at cimmeri.com <js at cimmeri.com>; General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org> Cc: General at ezwind.net <General at ezwind.net> Subject: Re: Installing an operating system on the 11/83 - update. On Tue, Feb 22, 2022 at 4:36 PM js--- via cctalk <cctalk at classiccmp.org> wrote: The RX-33 is the same sort of drive that you had in your PC if you wrote RX-50s with your PC. Back in the day, lots of people used RX50.SYS to have it setup the transfer rates, RPM and sectors per track parameters so that you could read/write them on a PC running DOS. The parameters are basically the same ones you need to write the 360k DOS floppies, only with twice the number of tracks and 10 sectors per track instead of 9 (this is done by making the track gaps smaller and eeking an extra sector out of the deal, but using at the same data rates). Did you have difficulties with Pin34 not being the change disk pin? That's what I ran into when I tried this many many years ago... Warner