Starting a PDP 11/03

I have a PDP 11/03 that used to be part of the startup for an 11/780 at the University of Arkansas at Fayettville. The 780 has long ago been scrapped. So, the 11/03 has the following boards: M8017-AA : DLV11-E/EC Single-line async control module (Replaces M8017,M8017-YB) Renamed DLVE1 M7940 : DLV11 Serial Line Unit (SLU, Async) M7944 : MSV11-B 4-Kword 16-bit MOS RAM M7946 : RXV11 RX01 8" floppy disk controller M9400-YE : Bootstrap terminator I also have the RX01 drive. So, other than media, what other options do I need to get this running as an 11/03? Where is the best place to get some basic media images? Is it possible to create boot media on the 8" drives I have connected to my PC using IMAGEDISK, 22DISK or the catweasel? I know a lot of these questions are answered out there, but I've not seen (yet) a simple step by step to get one of these running. I have the opportunity to get a couple of memory boards also: M8044-DB 32K, 16-BIT RAM for LSI-11 M8044-DE 32K, 16-BIT RAM for LSI-11 So, will these work with this 11/03? It seems they will, but I was looking for verification. Thanks for any help, and of course the associated "have you tried googling..." responses. Kelly