26 Apr
2015
26 Apr
'15
4:08 p.m.
They are on mine!! That's the first
thing I check! DUHH!
On 4/26/2015 5:50 PM, Mike Ross wrote:
That's harsh, JS. Incorrect pin markings are not
something that would
be anywhere near the top of my list, or anyone else's I suspect. One
does not casually reverse the installation of cables just to see if
maybe it will work!
Mike
On Mon, Apr 27, 2015 at 9:41 AM, js at cimmeri.com<js at cimmeri.com> wrote:
On 4/26/2015 12:58 PM, Josh Dersch wrote:
J, to save the time of those posting, it's more or less assumed you've
already tried the obvious things before asking for help. Otherwise,
posters are -- for example -- left having to first question whether a
machine is even plugged in to the wall or not.
- J
I've seen this, when the 20 pin cable from
M7859 to the console panel
is plugged in reversed.
Don't trust the marked pin 1 wire: sometimes DEC manufacturing twisted
the cables.
hope this helps,
Joerg
All LEDs "glowing dark"?
And sure enough, I flipped the cable around and things are much happier,
the front panel is completely responsive and the CPU and bus seem to be
working but I'll need to spend some more time with it to test stuff out.
That'll learn me to trust Pin-1 markings on DEC stuff :).
Thanks all for the suggestions, it's all been very educational...
- Josh