Zane H. Healy wrote:
>
> >REXX on a PC?
[snip]
>
> The Amiga also has ARexx, not sure how long, but I've an Amiga OS 3.1
> manual on it.
>
AREXX was introduced as a third-party enhancement sometime during
Workbench 1.3 and quickly became a popular cross application protocol.
By Workbench 2.0 it was integrated into the operating system and became
a standard component. Most of the apps for the Amiga now have support
for AREXX control (one of the reasons it was such a dream for the
video/graphics whizzes as they could have several programs automatically
process images and digitized video without much effort)
Larry Anderson
--
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Visit our web page at: http://www.goldrush.com/~foxnhare/
Call our BBS (Silicon Realms BBS 300-2400 baud) at: (209) 754-1363
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
> I've got the Techrefs in front of me (PC, and PC/XT)
>
> The PC motherboard schematics show that all 5 expansion slots are wired
> in parallel. There's nothing odd about any of them.
H'm. I use third-party books. Suppose if I wrote the author they'd put out
an updated edition?
>
> The schematics for both versions of the XT motherboard (64K-256K and
<Snip>
> > FWIW, I've run a variety of cards in XT slot 8 and PC slot 5 with no
> > problems.
>
> On clones, sure. But I have a genuine IBM PC/XT on my desk and the
> built-from-a-kit 8255 card wouldn't work in slot 8 without a little extra
> logic (which I made from unused gates on the card).
Nope. Real true-blues. Maybe it gets more tolerant with time?
manney
At 01:41 28/01/98 -0800, Aaron wrote:
>Does anyone have a remedy for bad case yellowing? I have the suspicion
>that it's a permanent chemical change, but I thought it might be worth a
>shot.
As I' ve previously said, I found FULCRON from AREXONS (if you can find it
there) to be the best in dissolving yellowish from computer plastics
(unbeatable against nicotine)
All you have to take care is to spray the pure product in a uniform way
(=the whole surface omogeneously) and brush it gently, alllowing the whole
surface to be in contact with the product.Then rinse: FANTASTIC!
Careful!
Avoid to spray and let drops come down + rinse without brushing!: where the
product
drop down, it leaves the surface CLEAN, but the rest still dirty. If you
rinse and try to apply the product again (even brushing it accurately) the
"clean-shadows-on dirt" will remain!
Ciao
????????????????????????????????????????????????????????????????????????????
? Riccardo Romagnoli,collector of:CLASSIC COMPUTERS,TELETYPE UNITS,PHONE ?
? AND PHONECARDS I-47100 Forli'/Emilia-Romagna/Food Valley/ITALY ?
? Pager:DTMF PHONES=+39/16888(hear msg.and BEEP then 5130274*YOUR TEL.No.* ?
? where*=asterisk key | help visit http://www.tim.it/tldrin_eg/tlde03.html ?
? e-mail=chemif(a)mbox.queen.it ?
????????????????????????????????????????????????????????????????????????????
This looks like a good place for drive and controller info...
David Given wrote:
>
> When dealing with old drives, I find the following site invaluable:
>
http://theref.c3d.rl.af.mil/
>
> It has controller and drive info for just about every drive under the sun
> (except the *really* wierd thing in my T3100). Very handy.
>
> David Given
> dg(a)freeyellow.com
At 03:25 PM 1/29/98 -0500, you wrote:
>Would that be the Southwestern Research Institute in
>San Antonio, Tx?
Yes.
Joe
>
>***** haleyk(a)okstate.edu ***** ***** ***** ends.
>
>
>
Two things: One, the person that said that appeared as the "from" on the
e-mail. ClassicCmp appears as the "to."
>"Why are manhole covers round?"
So that you can put them in any direction, without worrying about turning to
fit it in.
Tim D. Hotze
Kaypro 4 question....
I just picked up one of these bad boys from a thrift for $2.95 (my first
Kaypro) but I'm not
sure that it's feeling so good. I don't have a boot disk for it, and when I
power it on (it does power, that's a good sign) it says ," Please place
your diskette into drive A." The floppy never spins down, and putting a
CP/M booter in from another machine doesn't seem to generate any kind of
activity whatsoever. Is this normal behaviour, and I just need a boot disk?
BTW, does anyone know where I can get a boot disk for it?
Thanks,
Aaron
I'm trying to get NetBSD ona uVAX 2000. I was using
the wrong numbers in the disklabel. Now that I've figured that out,
the computer has antoher trick for me - I power it on, the RD53 spins up,
reaches top speed, and spins down before the CPU checkout finishes.
Did I kill a timing track or soemthing?
-------
Hello all,
Southwest Research Institute appears to be divesting itself of a
large lot of computer gear by closed bid. Here is the announcement:
----------------------------------------------------------------------
From: MBowen(a)swri.edu
Date: Wed, 28 Jan 98 17:07:23 CST
Reply-To: <MBowen(a)swri.edu>
Subject: fwd: surplus equipment for sale
Southwest Research Institute
Mark Bowen
Senior Buyer
Phone: 210-522-5005
Fax: 210-522-3964
Internet: mbowen(a)SwRI.edu
-------------
Original Text