- test-drb@ccmp.vtda.org - classiccmp.org

by jws＠jwsss.com

I just spotted a Compaq portable 3 in a 1980 "flashback" scene of Psych. A useless observation, it had the expansion bay on the back. "Psych" High Top Fade Out (2009) Season 4 episode 7 There appeared to be something like a Commodore 64 driving a display on camera. the CP3 was not powered on. Not sure if anyone here had anything to do with a loan or elsewhere, or if the film company owned it. Jim

14 years, 6 months

1
0
0 0

CP/M disk format: need help

by dm561＠torfree.net

----- Original Message: Date: Thu, 29 Dec 2011 00:39:36 -0500 (EST) From: Mouse <mouse at Rodents-Montreal.ORG> To: cctalk at classiccmp.org Subject: Re: CP/M disk format: need help Message-ID: <201112290539.AAA15251 at Sparkle.Rodents-Montreal.ORG> Content-Type: text/plain; charset="iso-8859-1" >> Here what 22disk tell me: >> http://elazzerini.interfree.it/Foto2982.jpg >A picture taken square-on without flash would have been substantially >easier to read - hint, hint, for anyone taking such pictures. ---------------- Capturing the text with a terminal program and pasting it into the email would be even easier... Sheesh... m

14 years, 6 months

2
1
0 0

Can you read rx02 or rl02 disks ??

by system11＠bigpond.com

To all, Happy New Year and good luck in 2011. Being new to this site, I have some requests for help. Question 1. Anyone with a working pdp-11 with rx02, I have some diskettes I wish to recover data and programs from for use with Robert Supnik's pdp-11 emulator, can you make a disk image suitable for above to email me. I am happy to pay you to do this and return the floppies to me. Question 2. As above but 4x RL02 cartridges, but if you can get the images, you can keep the disks. If you have both rx02 and rl02 would save time and postage. For those fussy about copyrights I have valid licenses and full documentation for RT-11, TSX+ and S&H Cobol, but unfortunately no longer have a machine to read them. (Hindsight is marvellous) Thanks in anticipation, Royce Smith Southern Highlands, New South Wales Australia system11 at bigbond.com

14 years, 6 months

1
0
0 0

Where to get VXT software?

by james＠slor.net

I have a DEC VXT 2000 that I would like to try out, but I don't have the software to host for it to load up the X environment across the network. Anyone know where I might still obtain the bits? Looks like the last version *may* have been v2.1g? Thanks! James

14 years, 6 months

8
16
0 0

Wanted: X/PEX terminals

by legalize＠xmission.com

The recent discussion of VXT2000 reminded me of X/PEX terminals. I'm looking for X Window System terminals, particularly early NCD models before they switched to using PC keyboards. I have several NCD 19s, see right hand side of this photo: <http://manx.classiccmp.org/collections/cgm/sprawl4/dsc_0608.jpg> However, I don't have any of the color X terminals from NCD for that period. Also, I have *no* PEX terminals and this would be a very welcome addition to the collection of the computer graphics history museum. I have a number of small box type X terminals from NCD, Tektronix and IIRC even an HP branded one. They are from late in the X terminal marketplace where they all had become fairly identical: small rectangular boxes to which you attached a PS/2 keyboard and mouse and a VGA monitor. I can post a list of the exact inventory in the museum's collection if that will help avoid duplicates. -- "The Direct3D Graphics Pipeline" -- DirectX 9 version available for download <http://legalizeadulthood.wordpress.com/the-direct3d-graphics-pipeline/> Legalize Adulthood! <http://legalizeadulthood.wordpress.com>

14 years, 6 months

2
1
0 0

FW: [N8VEM-S100:575] S-100 8086 Up and Runing

by LYNCHAJ＠YAHOO.COM

Hi, Good news on the S-100 8086 CPU board. First confirmed working installation "in the field" AFAIK. If we've gotten this far, I think demonstrating a working CP/M-86 will be along shortly. John already has CP/M-86+ running in the lab. http://s100computers.com/My%20System%20Pages/8086%20Board/8086%20CPU%20Board .htm Thanks and have a nice day! Andrew Lynch -----Original Message----- From: n8vem-s100 at googlegroups.com [mailto:n8vem-s100 at googlegroups.com] On Behalf Of Elsid Sent: Monday, December 26, 2011 5:43 AM To: N8VEM-S100 Subject: [N8VEM-S100:575] S-100 8086 Up and Runing Hi and Seasons Greatings. All the best to everyone and their families. I've just completed my S-100 8086 board. See photos at: http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=8086 Everything went smoothly except a missing K8 jumper 1-2 gave me some grief for a while. I have a V30 CPU and a 24MHz oscillator (8MHz clock) without any problems. I'll try 10MHz next when I get a crystal. Next step is to get CPM86 and MSDOS going. Thanks for another great board John and Andrew. Leon

14 years, 6 months

2
4
0 0

SC/MP kit PDF

by sttaylor＠charter.net

Any body know where I can find a PDF of the SC/MP Kit User's Manual or the Actual Manual National Semiconductor Pub# 4200113A SteveInSoCal

14 years, 6 months

3
8
0 0

CP/M disk format: need help

by ajp166＠verizon.net

On 12/27/2011 01:40 PM, Enrico Lazzerini wrote: > Well this is all i know: > > 8" > > STAT d:DSK: > > > 9600 > > r: 128 Byte Record Capacity > > Thats 1.28mb! Not many system used that and some like DEC RX02, Intel MDS DD were not MFM ( both were unique oddbal that most FDCs do not read). > 1200 > > k: Kilobyte Drive Capacity > > > 128 > > d: 32 Byte Directory Entries > > > 128 > > c: Checked Directory Entries > > > 128 > > e: Records/ Extent > > > 16 > > b: Records/ Block > > > 64 > > s: Sectors/ Track > > What format are you trying to achieve?? Looks vaguely like Morrow DD. > 2 > > t: Reserved 'rracks > > 2 > > SIDES > > > This is that I calculate: > > BEGIN SCO2 (1024 bytes/sector) - DSDD 8" > > > DENSITY MFM ,HIGH > > > CYLINDERS 77 SIDES 1 SECTORS 8,1024 > > > SIDE1 0 1,2,3,4,5,6,7,8,9 > > > SIDE2 0 1,2,3,4,5,6,7,8,9 > Likely does not start with sector 0, that is unlikely due to the bit pattern and how DD controllers work. Besides 0 though 9 enumerates 10 objects, not 8. > ORDER CYLINDERS > > > BSH 4 BLM 15 EXM 3 DSM 599 DRM 127 AL0 0C0H AL1 0 OFS 2 > Looks about right. There is no skew applied as you show it. If skew is wrong reading the directory is impossible and you get trash if anything at all. Allison > END > > > > Here what 22disk tell me: > > > > http://elazzerini.interfree.it/Foto2982.jpg > > > > Where I'm wrong? > > > > Thanks for any suggestion. > > Enrico > >

14 years, 6 months

1
0
0 0

Merry Newtonsday

by alex＠cheltscum.co.uk

Merry Christmas tony. May all you capacitors be within tolerance. ard at p850ug1.demon.co.uk wrote: >Merry Newtonsday, Christmas, Winter Solstice, Yule, and anything else you >chose to celebrate [1] to members of this list and their families. I hope >you have a pleasant holiday and still maange to get some classic >computing done. > >[1] And Halloween for those of you who can't remember if you're missing 2 >fingers. > >-tony >

14 years, 6 months

3
2
0 0

CP/M disk format: need help

by enrico.lazzerini＠tiscali.it

Well this is all i know: 8" STAT d:DSK: 9600 r: 128 Byte Record Capacity 1200 k: Kilobyte Drive Capacity 128 d: 32 Byte Directory Entries 128 c: Checked Directory Entries 128 e: Records/ Extent 16 b: Records/ Block 64 s: Sectors/ Track 2 t: Reserved 'rracks 2 SIDES This is that I calculate: BEGIN SCO2 (1024 bytes/sector) - DSDD 8" DENSITY MFM ,HIGH CYLINDERS 77 SIDES 1 SECTORS 8,1024 SIDE1 0 1,2,3,4,5,6,7,8,9 SIDE2 0 1,2,3,4,5,6,7,8,9 ORDER CYLINDERS BSH 4 BLM 15 EXM 3 DSM 599 DRM 127 AL0 0C0H AL1 0 OFS 2 END Here what 22disk tell me: http://elazzerini.interfree.it/Foto2982.jpg Where I'm wrong? Thanks for any suggestion. Enrico

14 years, 6 months

1
0
0 0

rl02 disks for cheap on ebay

by tdk.knight＠gmail.com

spoted this under the miss labeled as rlo2 instead of rl02 anyhow i nabbed 2 theres 8 left of the 10 avail for 9.50 each ebay auction number 330656553200 thought u guys like to know

14 years, 6 months

31
63
0 0

Software wish list

by g-wright＠att.net

Hi, All I'm back at the grind trying to find a few old OS's The first is for my TEK DPO (WP 1210 Digital processing scope ) this is a 7704a scope with a P7001 Digital processor that connects to a DEC PDP 11/05 . It runs on TEK Basic (8" floppy or DEC tape}.. The official name is "TEK SPS Basic V02" There is also a system test disk. This uses a TEK 4010 Terminal for a display. The second is a Pertec Mini ?? coax system 4010 Don't know much about it other than it used coax to the dumb terminals instead of Serial.. (1/4 " Tape) The third is a OMS Zues 4 I beleive it ran cpm or mpm (5 1/4 disk) The forth is a Tek 4051. looking for the Tape images. The fifth is a Tek 4404 computer. Looking for the disks (5 1/4 floppy) I can handle most image files. Or would gladly pay for a Disk or tape. If I missed somewhere online, point me in the right direction Thanks, for reading this Jerry Jerry Wright JLC inc g-wright at att.net

14 years, 6 months

4
5
0 0

FS: HP-85 + HP9121 and more

by hp-fix＠xs4all.nl

Before I put it on the auction site. I've for sale a HP-85 with a QIC40/80 modified tape drive including: ROM drawer with : 1 Matrix ROM 1 Mass Storage ROM 1 Input/Output ROM 1 Printer/Plotter ROM 1 Advance programming ROM 16 K RAM module HP-IB module HP 9121 double 3.5 disc drive 2 QIC40/80 tapes (1 empty, 1 containing the Standard software) 2 3.5 inch disc's (NOS) 1 Carrying box (brown skai) If necessary a complete manual set on CD/DVD It is a complete set for who wants to start with the HP-85. I acquired the HP-85 a few weeks ago checked it and converted the tape drive to QIC40/80 replaced the printer timing belts and some elco's. The computer is clean but a bit yellowed, the HP 9121 drive is cleaned and all hardened grease is removed so it is fully functional. I'm open for offers, the items are located in the Netherlands but I ship worldwide, local pickup is also possible. I'm not doing this to get big money but I want to earn a little to acquire other HP-stuff for my collection and find it fun to restore old HP equipment. Please react off-list at hp-fix_at_xs4all_dot_nl -Rik

14 years, 6 months

1
0
0 0

Imaging a TK50 across the network

by sander.reiche＠gmail.com

Hi all, It is probably asked before, but I can't seem to find it in the archives. I have a MicroPDP up & running 2.11BSD but no spare TK50 tapes to make a backup of it, before I f*ck it all up :) I do have a lot of TK50s which weren't mine and they have data on it of which I do not know the status. They came with a MV3100 with VMS on it, which I am going to use eventually as well. So I'm not really willing to just scrap the data on those tapes. I'd like to make a backup-image of those across the LAN before I write anything else on it. How do you guys usually do it? # tcopy /dev/rmt0 to see what's on it # dd if=/dev/rmt0 bs=??? | rsh other_current_bsdmachine_with_lots_of_diskspace -l <user> dd of=vms_tape_file?.img bs=??? for every file on there? I didn't even know `dd' wouldn't cross EOF boundaries tbh (wasted my youth on C64s and Amigas :)). -- ~ UNIX is basically a simple operating system, ? ? ? ? ? ?but you have to be a genius to understand its simplicity. ~ dmr

14 years, 6 months

3
2
0 0

CP/M: How to use old dischette?

by elazzerini＠interfree.it

Hi all, The reason why I'm interested in this topic is that I recently restored a Ferguson Bigboard I with its CP/M 60K. I'd like to try different programs that are contained in third parts diskettes, but they are of course in a different formats. I am using ANADISK to identify the format and sequence of sectors on disks and 22disk133 to try to read them correctly. Despite having read the definitions of the FCB manual on CP / M, I am finding difficulty in : 1) to determine the block size chosen for different disks; 2) Identify the value AL0 Unfortunately it seems that any further calculation is dependent on the size of the block that would seem a prior undetectable, and i'd need to try different values (starting from 1024,2048,4096 and 8192). Is it in this way? Some format i'd like to determinate: A xerox SWP diskette: SSDD 9,1024 sectors sequence 1,2,3,4,5,6,7,8,9 A MK-83 diskette: DSDD 8,1024 sectors sequence 1,4,7,2,5,8,3,6 Thanks for any helpful hint. Enrico - Pisa - Italy

14 years, 6 months

2
1
0 0

Tandata TD1100 dialer

by ard＠p850ug1.demon.co.uk

It took me a lot of work to discover this information, and I am not sure why it's so cryptic. But anyway... Some time ago I mentioned I had a Tandata TD1100 viewdata set on the bench. At power-on you get a dialing menu, the numbers for which are clearly stored in the battery-backed RAM. Dialing a number from the menu was easy (<menu number>#, for example 2#). But I could not find out how to stroe numbers in the menu, everything I tried got 'Please Try Again'. I am not suprised I didn't find the right sequesnce by trial and error. It is clearly designed to be impossible to get by accident. I fianlly found it by readign otu the firmware ROM (it is socketed, but I can assure you that desolderign a 24 pin DIL chip would have been trivial compared to the rest of it), writing a quick-and-dirty disassmbler for 6502 code (soemthing that took me most of yesterday (Newtonsday) afternoon [1]), and then going through the lisitng. [1] This would ahev been a lot easier if the 6502 data sheet I'd been workign from handn't been written by a boatie. There's a nice 16*16 table of the nmemonics, the rows and columns being numbered from 0-F. It turns out that the _rows_ are the most significant nybble, in other words you read it across, not down. The lables indicating this are in tiny type in one corner, and I missed them. So I had to move my table of mnemonics aroudn a bit. ARGH! My first guess, which turned out to be correct, is that it would use CMP instructions to identify wheter a typed character was 'acceptable' or not. So I searched the listing for these, and found a sequence of CMPs which seemed to do the right thing. I then spent some time figuring out what that routine does, and I finally got the sequence to load a number into the dialer menu. It is : Turn on 'program mode' with the switch on the back first and type : <menu position>*****<Number to dial># For exxaple 2*****123456# will store 123456 into the second position of the menu. Note that it's 5 '*'s. No fewer (or you get an error), no more (or you get spaces at the start of the number in the menu. If you do not turn on program mode, the entry is ignroed -- no error message. -tony

14 years, 6 months

2
1
0 0

QPro-4 for CP/M-80?

by snhirsch＠gmail.com

I had this years ago and found only the manuals in my archives. Does anyone have the diskettes or images for this program? I found an MS-DOS version on the web, but turned up nothing for CP/M. Steve --

14 years, 6 months

1
0
0 0

Test Message - Just to see if Classiccmp is alive

by jhfinedp3k＠compsys.to

Test Message - Just to see if Classiccmp is alive

14 years, 6 months

6
6
0 0

S: schematics for russian I12 (MC4601) Interace Board

by holm＠freibergnet.de

searching schematics od russian PDP-11 Interface I12 Reply-To: holm at freibergnet.de Organization: FreibergNet Internet Services, TSHT Priority: normal X-Phone: +49-3731-74222 X-Mobile: +49-172-8790741 X-Fax: +49-3731-74200 Hope you all had a merry christmas with and santa bought nice things? Guys Im searching for the schematics of the russian I12 (MC4601) Interface board for their metric PDP11 Q-Bus machines. This card is something like an MXV11 w/o the memory, just 2 SLUs on this board. I have such a board here that must be repaired and I want to look to the schematics to steel parts of them for my K1801VM2 SBC... Can someone help please? I konw, that the shematics where postet on the russian narod.ru site but the link is dead now... Kind Regards, Holm -- Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583 www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741

14 years, 6 months

1
0
0 0

unknown machine

by jonas＠otter.se

or something unusual for mains power; ISTR something somewhere that >> had a mains power frequency in the kHz, or at least hundreds of >> Hz....) >> > IIIRC, power line losses increas with frequency, so this would be >> > unusual to say the least. > I think it was something that, like a boat or airplane, is not part of > the large-scale power grid but which does have enough of a power > distribution system for it to be fair to call it "mains". > > But that memory is pretty fuzzy; I could be just plain misremembering. > Planes use 400 Hz. US Navy ships seem to use 450 and 120V 400 Hz for electronics and weapons systems and servicing aircraft. Presumably any other country's aircraft carriers also provide 400Hz power for the aircraft. /Jonas

14 years, 6 months

1
0
0 0

Looking for a copy of MicroPDP-11 Systems Maintenance Guide

by sander.reiche＠gmail.com

Hi all, Regarding the above topic from November this year, I was wondering if the mentioned guide (EK-MIC11-SG-001) was indeed uploaded to bitsavers eventually? If so, where can I find it? regards, Sander Reiche -- ~ UNIX is basically a simple operating system, ? ? ? ? ? ?but you have to be a genius to understand its simplicity. ~ dmr

14 years, 6 months

2
1
0 0

HP 1000 software collection

by aek＠bitsavers.org

J David Bryan organized the contents of the tapes that I've read over the past ten years. The software is available for non-commercial use under an agreement between CHM and HP. A huge thank you to Mr. Bryan for doing this, since I haven't had the time to organize it. There are over 75,000 files, around 2gb. It should be finished uploading later tonight. http://bitsavers.org/bits/HP/HP_1000_software_collection

14 years, 6 months

12
16
0 0

Michigan Timesharing System

by jeff.ogden＠umich.edu

On Fri, 23 Dec 2011 at 05:35:58 CST, Christian Corti wrote: > That's great! > Is there anywhere a list of supported hardware? I'm not very comfortable > with the idea of simulator-only software. I'd be interested to try it > some day on our 4331. MTS should work on a 4331. >From the MTS Wikipedia article (http://en.wikipedia.org/wiki/Michigan_Terminal_System#Hardware_used): In theory MTS will run on the IBM S/360-67, any of the IBM S/370 series, and its successors. MTS has been run on the following computers in production, benchmarking, or trial configurations: ? IBM: S/360-67, S/370-148, S/370-168, 3033U, 4341, 4361, 4381, 3081D, 3081GX, 3083B, 3090-200, 3090-400, 3090-600, and ES/9000-720 ? Amdahl: 470V/6, 470V/7, 470V/8, 5860, 5870, 5990 ? Hitachi: NAS 9060 ? Various S/370 emulators All of the information that follows is included in the tar.gz archives available at Bitsavers.org. The D6.0 documentation has also been combined in a single PDF that is available on the MTS Archive at: http://archive.michigan-terminal-system.org/documentation/documents/MTSD6Do… Among other things the file D6.0-MTS-DOC.txt from April 1987 (a year prior to the release of D6.0) says: MTS is currently being run on the following computing systems: Amdahl 5860, 5870, 470V/8, IBM 3090-400 (with vector facility), 3081G, 3081D, 3033N, and 4361. In addition MTS has been tested on or was used for production on the following machines: Amdahl 470V/6, 470V/7, 5890, IBM 3033U, 370/148, 370/168, 370/158, 4341, and NAS 9060, and XL. The same file goes on to say: Machine Requirements MTS requires an IBM 370 compatible machine (including the 30xx machines) with at least two megabytes of memory and the following features: Floating Point Universal Instruction Set CPU-timer and Clock-Comparator Translation with 1M segments and 4K pages Conditional-Swapping PSW-Key-Handling Channel Indirect Addressing on all channels Clear I/O on all channels It will make use of the following features if they are available: Extended precision floating point Vector facility Direct control (limited use) Branch and Save Fast release on channels Invalidate Page Table Entry Common Segment Facility Other features are not used, unless user programs make use of them. The MTS file system normally uses IBM 3330 and/or 3350 compatible disks in any combination although it also supports older types of disks. MTS also provides support for the Xerox 9700 page printer, the Autologic APS-5 phototypesetter, and for both IBM and ANSI standard magnetic tape labeling/blocking and the normal IBM unit record equipment. >From D6.0-NEWSYS.txt: 1. The starter system requires a minimum of one 3270 terminal, one 3380 disk drive, and one 9-track tape drive. >From the D6.0-NOTES.txt: MTS can run under the 370 and 370-XA architectures. Under 370-XA, each task is limited to an address space of sixteen megabytes, but all real storage on the machine will be used to support virtual storage. MTS does not (yet) run run under IBM's ESA-370 architecture. MTS provides Named Address spaces, a facility similar to IBM's Discontiguous Saved Segment support under VM, to allow tasks to share preloaded programs and data. A program may be loaded into a Named Address Space (or NAS) at system IPL-time and then added to or deleted from a task's virtual storage as needed. MTS will use expanded storage as a high-speed cache to minimize I/O to DASDI. The cache is store-through; all writes go immediately to disk. However, disk reads will be satisfied from the cache if possible, thereby cutting down the number of real disk I operations required. Changed DASDI [in D6.0] to use "Read Device Characteristics" command to determine the size of the disk being formated. This gives us support for any disk supporting this command including: 3380s (Ds and Es have been tested; Js and Ks should work but have never been tested) CMS minidisks (untested) The old FBA disk support has been rejuvenated. MTS now supports internal 9370 disks (9335s have been tested; we have not tested 9332 support).

14 years, 6 months

1
0
0 0

Michigan Timesharing System

by jeff.ogden＠umich.edu

On Thu 22 Dec 2011 at 19:00:26 CST, Josh Dersch wrote: > Very cool! I have a set of MTS-related manuals from 1979, would they be > of any interest to you for archival purposes, assuming you don't already > have copies? > > (They are: "Digital Computing, FORTRAN IV, WATFIV, and MTS (with *FTN > and *WATFIV)" Parts 1 & 2 by Brice Carnahan and James O. Wilkes.) > > - Josh Al might like a copy to scan for the PDF archive at Bitsavers, but he can speak for himself. Scanned versions of the Caranahan and Wilkes book and a number of others related to the Michigan Terminal System (MTS) are already available online in the Hathi Trust Digital Library: http://babel.hathitrust.org/cgi/mb?a=listis;c=1889583521 A more limited set of PDF documents that doesn't include the Caranahan and Wilkes book is available from U-M's Deep Blue digital archive and the PDF Archive at Bitsavers: http://deepblue.lib.umich.edu/handle/2027.42/79570 http://www.bitsavers.org/pdf/univOfMichigan/ The MTS PDFs in Deep Blue and at Bitsavers tend to be of a higher quality since they aren't scans of physical books. -Jeff

14 years, 6 months

1
0
0 0

Merry Newtonsday

by ard＠p850ug1.demon.co.uk

Merry Newtonsday, Christmas, Winter Solstice, Yule, and anything else you chose to celebrate [1] to members of this list and their families. I hope you have a pleasant holiday and still maange to get some classic computing done. [1] And Halloween for those of you who can't remember if you're missing 2 fingers. -tony

14 years, 6 months

1
0
0 0

unknown machine

by paco.linux＠gmail.com

Any Idea ? (located in San Diego Supercomputer Center, fujitsu machines) http://oi39.tinypic.com/255pcn4.jpg -- |_|0|_| |_|_|0| ??? |0|0|0|

14 years, 6 months

8
13
0 0

Anyone have a case or memory for an HP 9000 712/60

by dm561＠torfree.net

---------Original message: Date: Sat, 24 Dec 2011 08:52:32 +0100 From: Jochen Kunz <jkunz at unixag-kl.fh-kl.de> On Fri, 23 Dec 2011 01:07:46 -0200 "Alexandre Souza - Listas" <pu1bzz.listas at gmail.com> wrote: >> AFAIK, the 712 uses common 486 (simm-72) memory > No. The HP9000/7xx SIMMs look, smell, taste like PeeCee RAM, but they are > different. You need the very special, propriatary HP9000 SIMMs for that > machine. Sometimes you just have to cut a trace or two and/or add a jumper or two; for example here's how to convert a standard SIMM for use in an HP LJ: www.keycruncher.com/blog/2003/12/14/making-standard-simm-s-work-memory-upgr… I did the same sort of mod to use standard SIMMs to expand memory in my Toshiba T3100e.

14 years, 6 months

1
0
0 0

IBM 5120, Datamaster (system 23) in FLA

by tosteve＠yahoo.com

Neal wrote to me: >> I was a developer way back when and still have my 5120 & Sys 23. >> >> I'd like to find these relics a nice home instead of the landfill. >> They were painted funky colors (they look great - not the ugly grey) >> and were used back to back with a glass top for a coffee table. >> >> Neal Lebar >> nlebar at innovatefocus.com >>

14 years, 6 months

1
0
0 0

FS. PDP 11/35 + RK05 units in Yorkshire

by silvercreekvalley＠yahoo.com

All gone now. Thanks for the interest.

14 years, 6 months

2
1
0 0

Anyone heard from/of Curt@atarimuseum.com?

by IanK＠vulcan.com

He and I were engaged in an email exchange that suddenly stopped, and I hope nothing unpleasant has befallen him. Thanks -- Ian

14 years, 6 months

1
1
0 0

Michigan Timesharing System

by aek＠bitsavers.org

the sources and binaries for MTS are now available under http://bitsavers.org/bits/UniversityOfMichigan/mts/

14 years, 6 months

9
9
0 0

Broken Amiga keyboard

by eivinde＠terraplane.org

I have an Amiga keyboard (pcb says A3000) where the four keys 1, q, a and z doesn't work. The rest of the keyboard functions well. This happened after a longer period where I didn't use the keyboard. Does anybody have any ideas of things to check out to try to get this working again? Regards Eivind

14 years, 6 months

4
4
0 0

17. Michigan Timesharing System (Al Kossow)

by gerhard.kreuzer＠liftoff.at

Hi Al, please can you check the link, because it doesnt work out here. Thanks. With best regards Gerhard

14 years, 6 months

2
1
0 0

Recomp disk assembly

by aek＠bitsavers.org

Someone did an impressive job of destroying this to make it look "pretty" http://www.ebay.com/itm/300640339205

14 years, 6 months

7
9
0 0

Tons of manual and literature from the 1960s+ in Irvine, CA

by tosteve＠yahoo.com

Hundreds of computer manuals and literature from the 1960s mostly, the golden age of the minicomputer. Most in excellent condition - many probably never opened. Located in Irvine, CA (Orange County) Includes Univac, HP, lots of minicomputer time-share. No list of contents available - there's more literature than manuals. See a few pictures here. http://oldcomputers.net/temp/manuals1.jpg http://oldcomputers.net/temp/manuals3.jpg http://oldcomputers.net/temp/manuals4.jpg http://oldcomputers.net/temp/manuals5.jpg http://oldcomputers.net/temp/manuals6.jpg http://oldcomputers.net/temp/manuals2.jpg Last photo is misleading - only about 12 boxes contain this material. Contact Chuck if interested: Chuck.Hobbs at gmail.com

14 years, 6 months

5
5
0 0

pickup in the Boston area?

by mcguire＠neurotica.com

Hey folks. Is there anyone here that'd be willing to pick up a DEC LA180 printer for me in Cambridge, MA, and sit on it for me for a little while? -Dave -- Dave McGuire New Kensington, PA

14 years, 6 months

5
7
0 0

SOLUTION (Was: Unix handles file extensions "very poorly"?

by Arno_1983＠gmx.de

[Resend with corrected Subject:] Liam Proven <lproven at gmail.com> (in reply to a message from Fred Cisin) wrote: >Steady on, old chap. Pop a few more dried frog pills and calm down. Hah! Then I probably need some too ;-) Are those already on sale in the drugstore in Treacle Mine Road or do you still have to get them from the pharmaceutical institute of the Unseen University? (Another appreciator of TP humor outs himself...) >Joking aside, I have considered it. I honestly think a decent >Win9x/NT-style DOS shell for Linux would help its adoption by Windows > techies moving across. This is somewhat akin to the ideas I've been pushing around for some years now. I'm thinking that porting a familiar OS to some 'obscure' (to the average DOS/Wintel user) vintage architecture could serve to keep lots of these machines in active service with the general public. (But then there wouldn't be so many around for us to hoard - so that's perhaps why it isn't done...) Of course there would be a need for software portability as well, so you might want to include some sort of cross assembler or how-you'd-call-it in the package that, llke, takes a win32-x86 executable and turns out a win32-sparc (or whatever) executable. No idea if that's even remotely possible without excessive manual intervention... > The main snag being that C21 Windows techies >barely use the CLI at all and are not really skilled in it, whereas >1990s or even 1980s MS techies probably know Unix already. So don't contend yourself with just the CLI - you don't have to. There is an ongoing effort to create a FOSS Windows 2k/XP workalike named ReactOS. Currently that is targeted at x86 only but I'm holding high hopes that its code base will inspire such portery. "Windows" for all those systems that pack the horsepower to run it, including but not limited to those that once were NT's target platforms - Alpha, RS/6k (Siemens RM400), PPC (PowerStack) and Clipper (Intergraph) springing to mind immediately. >But I'd love a DOS shell for Linux, yes. If I had the skills, I'd try to do it. Partly for the convenience, partly for fun, partly for the sheer joy >of outraging traditional old-time Unix-heads. :?) Well put. Any of these on ist own would make enough of a reason methinks ;-) Add the conservation and ongoing practical utility of vintage hardware to that and let's see where it goes. Arno Kletzander ...sent from my HTC Magician PDA -- NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zur?ck-Garantie! Jetzt informieren: http://www.gmx.net/de/go/freephone

14 years, 6 months

1
0
0 0

cctalk Digest, Vol 100, Issue 51

by Arno_1983＠gmx.de

Liam Proven <lproven at gmail.com> (in reply to a message from Fred Cisin) wrote: >Steady on, old chap. Pop a few more dried frog pills and calm down. Hah! Then I probably need some too ;-) Are those already on sale in the drugstore in Treacle Mine Road or do you still have to get them from the pharmaceutical institute of the Unseen University? (Another appreciator of TP humor outs himself...) >Joking aside, I have considered it. I honestly think a decent >Win9x/NT-style DOS shell for Linux would help its adoption by Windows > techies moving across. This is somewhat akin to the ideas I've been pushing around for some years now. I'm thinking that porting a familiar OS to some 'obscure' (to the average DOS/Wintel user) vintage architecture could serve to keep lots of these machines in active service with the general public. (But then there wouldn't be so many around for us to hoard - so that's perhaps why it isn't done...) Of course there would be a need for software portability as well, so you might want to include some sort of cross assembler or how-you'd-call-it in the package that, llke, takes a win32-x86 executable and turns out a win32-sparc (or whatever) executable. No idea if that's even remotely possible without excessive manual intervention... > The main snag being that C21 Windows techies >barely use the CLI at all and are not really skilled in it, whereas >1990s or even 1980s MS techies probably know Unix already. So don't contend yourself with just the CLI - you don't have to. There is an ongoing effort to create a FOSS Windows 2k/XP workalike named ReactOS. Currently that is targeted at x86 only but I'm holding high hopes that its code base will inspire such portery. "Windows" for all those systems that pack the horsepower to run it, including but not limited to those that once were NT's target platforms - Alpha, RS/6k (Siemens RM400), PPC (PowerStack) and Clipper (Intergraph) springing to mind immediately. >But I'd love a DOS shell for Linux, yes. If I had the skills, I'd try to do it. Partly for the convenience, partly for fun, partly for the sheer joy >of outraging traditional old-time Unix-heads. :?) Well put. Any of these on ist own would make enough of a reason methinks ;-) Add the conservation and ongoing practical utility of vintage hardware to that and let's see where it goes. Arno Kletzander ...sent from my HTC Magician PDA

14 years, 6 months

1
0
0 0

Seeking Dell 316LT laptop ($$$)

by sellam＠vintagetech.com

I am in need of a Dell 316LT laptop. This would be from the late 1980s. Ideally it works. If you've got one and you want to make a deal, please contact me directly. Thanks! -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]

14 years, 6 months

1
0
0 0

Visual 1050 hard drive setup

by d_cymbal＠hotmail.com

> Date: Tue, 20 Dec 2011 14:53:12 -0500 > From: "B. Degnan" <billdeg at degnanco.com> > To: <cctech at classiccmp.org> > Subject: Re: Visual 1050 hard drive setup > > On 12/19/2011 05:30 PM, Damien Cymbal wrote: > > > Does anybody have a Visual 1050 with hard drive setup? I am looking > > > for any doc/pointers on how to get a hard drive configured under > > > CP/M for this system. > > > > > I do have two of them with HD, haven't powered it for a little while so > > memory is fuzzy. > > > > As I remember it used a different copy of the bios (boot disk) to configure > > as the bios had to be aware of the hard drive. I can look at docs but > > powering it up would take weeks to get to as other projects are in the > > forefront. > > > > That's correct. There is a special disk to set up the hard drive. I think you > have to have this disk in drive A in order to read the hard drive, I don't think > one can simply boot a 1050 to harddrive. I plan to work on this system over > the next few months, I will document the process on my site when I do. I > also am knee-deep in projects at the moment. > Bill Thanks for the initial responses Allison and Bill. Here's a summary of what I have been able to cull together so far: (1) The Z80 BOOT PROM code (version 1.2 at least, which is the source listing I have) appears to probe the Winchester, for boot e.g. - try to read Winchester - check result - if error, try floppy - if OK, check Winchester label - if bad label, try floppy - if good label load system and boot??? (this part is unclear to me) (2) Not all of the v1050 CP/M BIOS versions appear to support the Winchester. Versions up to 1.1 do not appear to contain the WINCH.ASM module which I am assuming is required for support. I do not have access to version 1.2, but I see this module showing up starting in version 1.3. I would assume that with the 1.2 BOOT PROM and the 1.4 CP/M BIOS I could support the Winchester (barring any bugginess - Bill I believe you have v2.0 of the CP/M BIOS and not sure on the BOOT PROM). What isn't clear to me at this point is how to install CP/M onto the Winchester and get the label setup so that the PROM would boot directly from the hard drive.

14 years, 6 months

2
2
0 0

DEC RK05 mounting rails needed

by kseiner＠tele2.at

Maybe someone has a spare pair of mounting rails for a DEC RK05 drive, so that I can finally mount it into my H950 rack? Offers from all over the world accepted :) (I'm located in Austria/Europe) - Klaus

14 years, 6 months

7
10
0 0

HP color crt oscilloscopes

by chrism3667＠yahoo.com

is anyone knowledgeable enough of their product line to give me (us) a rundown of these models, and characteristics (roughly) since their inception (1989 AFAIK). I'm in the market for one, probably an older model, any condition, but not too shabby w/regards to sampling rate (let's say starting at 100mhz, they may not have gone any lower anyway).

14 years, 6 months

1
0
0 0

FYI: CollectiveAccess 1.1 released

by legalize＠xmission.com

<http://www.collectiveaccess.org/news/?p=230> -- "The Direct3D Graphics Pipeline" -- DirectX 9 version available for download <http://legalizeadulthood.wordpress.com/the-direct3d-graphics-pipeline/> Legalize Adulthood! <http://legalizeadulthood.wordpress.com>

14 years, 6 months

11
13
0 0

Christmas cleanup! [Updated]

by tpresence＠hotmail.com

> From: Brian Wheeler <bdwheele at indiana.edu> > Subject: Re: Christmas cleanup! [Updated] > To: cctalk at classiccmp.org > Date: Wednesday, November 30, 2011, 8:46 AM > I've updated the list below, and I've > got a question for everyone.<snip>> > * DECserver 200/MC ($25, will ship) > > 8 db25 portsDoes the DECserver 200/MC support DDCMP for system interconnects? Im reasonably new to the DECnet Phase IV protocol, and was looking to do some learning. If so, I'm interested.Kevin

14 years, 6 months

1
0
0 0

breaking out of *n*x jails

by RichA＠vulcan.com

From: Sean Conner Sent: Wednesday, December 14, 2011 11:16 AM > It was thus said that the Great Jochen Kunz once stated: >> On Wed, 14 Dec 2011 00:48:15 +0000 >> Liam Proven <lproven at gmail.com>> wrote: >>> Ditto, and a decent security measure too. >> It would be acceptable as a security measure to restrict root login to >> the local text console. This prevents "missuse" of the root account but >> makes the system accessible in the event of a failure. If e.g. NIS >> breaks you can't get into a Ubuntu machine to fix the problem. All you >> can do in that situation is to hit the reset button and boot single >> user. But that is an other story... > GenericUbuntuNonRootUserPrompt% sudo vi > (while in vi) > :shell > Have fun. > -spc (Has had to do that a few times on fresh Ubuntu installs) That's an awful lot of schratzing around to accomplish what a simple GUNRUP% sudo /bin/bash will do for you. (I use this frequently on my Snow Leopard system.) Rich Alderson Vintage Computing Sr. Server Engineer Vulcan, Inc. 505 5th Avenue S, Suite 900 Seattle, WA 98104 mailto:RichA at vulcan.com mailto:RichA at LivingComputerMuseum.org http://www.LivingComputerMuseum.org/

14 years, 6 months

14
23
0 0

Christmas cleanup!

by sander.reiche＠gmail.com

Hi Brian. I just got on the list and I'm working backwards through the archives. Couldn't reply on one of the existing ones. You did update the list, so I'm guessing the vt220 and the 8" floppies actually are already gone? -- ~ UNIX is basically a simple operating system, ? ? ? ? ? ?but you have to be a genius to understand its simplicity. ~ dmr

14 years, 6 months

1
0
0 0

scan of manual for Processor Tech. 16KRA?

by eric＠brouhaha.com

Does anyone happen to have a scan of the manual for the Processor Technology 16KRA card? Google isn't turning up anything. Thanks! Eric

14 years, 6 months

1
1
0 0

Visual 1050 hard drive setup

by billdeg＠degnanco.com

> > On 12/19/2011 05:30 PM, Damien Cymbal wrote: > > Does anybody have a Visual 1050 with hard drive setup? I am looking for any doc/pointers on how to get a hard drive configured under CP/M for this system. > > > > Thanks. > > > > > > > I do have two of them with HD, haven't powered it for a little while so > memory is fuzzy. > > As I remember it used a different copy of the bios (boot disk) to > configure as the bios had to be aware of the hard drive. > I can look at docs but powering it up would take weeks to get to as > other projects are in the forefront. > > That's correct. There is a special disk to set up the hard drive. I think you have to have this disk in drive A in order to read the hard drive, I don't think one can simply boot a 1050 to harddrive. I plan to work on this system over the next few months, I will document the process on my site when I do. I also am knee-deep in projects at the moment. Bill

14 years, 6 months

1
0
0 0

rl02 and other disks from ebay

by jzg22＠drexel.edu

If anyone bought any of those rl02 or other dec or classic disk packs and media from ebay, please PLEASE read the contents out before overwriting them! I recently found a bunch of lost unix v5-era source code on erased space on an image of a disk pack image from dennis ritchie, archived unknowingly at tuhs, so who knows what other gems may be on those disks in erased space? dump them with dd, not with dump, since dump ignores or zeroes out blank space. Tar obviously ignores blank space as well. -- Jonathan Gevaryahu jzg22 at drexel.edu

14 years, 6 months

2
1
0 0

recreating C source from binary

by lehmann＠ans-netz.de

Hi, I'm trying to re-create the source files for the Z8000 UNIX I have on my Z8000 system (it is a S8000+ZEUS clone). Easy programs like sync.c where easy. But when argc/argv is involved, I'm not able to generate 1:1 matching binary code. I'm working on /etc/unlink for now. I tried the following C file: char whatstr[] = "@[$]unlink.c 2.1 07/23/82 21:19:30 - 87wega3.2"; main(argc, argv) int argc; char **argv; { if(argc!=2) { write(2, "Usage: /etc/unlink name\n", 24); exit(1); } unlink(argv[1]); exit(0); } The original ASM code for the beginning of main() until the argc check is: 0042 abf3 dec r15,#4 0044 5df60000 ldl %0000(r15),rr6 0048 0b070002 cp r7,#%0002 The ASM code my C file generates is: 0042 abf3 dec r15,#4 0044 1df6 ldl @r15,rr6 0046 0b070002 cp r7,#%0002 keep in mine, that r15 is considered as the "stack pointer". I wonder how to get the ldl from the original binary. I also tried to declare argv with "char *argv[]" which resulted in the same code. Forcing the compiler to store argv into a register by using the "register" keyword results in completly different code: (sp = stack pointer = r15) #17 adb unlink ADB: P8000 1.6 ? 0x0042/i %0042: dec sp,#6 ? %0044: ld %0004(sp),r14 ? %0048: ld %0002(sp),r7 ? %004c: ld r14,r6 ? %004e: cp r7,#%0002 ? $q #18 Maybe the C compiler used to compile /etc/unlink differs from the C compiler shipped with the system (maybe an older version) but I don't want this to be true for now ;) Anyone with deeper ASM and C knowledge than me sees what could be done here? Before someone asks - yes I'm sure the source file was in C and not ASM based on the whatstr. Symboltable of the original /etc/unlink is empty as well (striped binary). Regards, Oliver

14 years, 6 months

6
11
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb