test-drb

test-drb@ccmp.vtda.org

101090 discussions

(fwd) FREE: Collection of Early MS-DOS/PC-DOS SW and manuals

by ynagasaw＠ic.sunysb.edu

I would really like to get old Windows and Turbo Prolog, but I can not go there to pick them up. Is it impossible to send them to me? Of course I will pay for shipping and every thing. Thank you, Yujin Nagasawa

29 years

Radofin Aquarius

by jeffh＠unix.aardvarkol.com

Of course, Sam and others have taken to talking about the Mattel Aquarius lately, but I've never seen a mention of the Radofin version, which other than the lack of 'Mattel' logos and the change to the model number and label on the bottom of the machine, is identical. Were many of them sold? Does anyone else out there have one? About all I've been able to learn is that since Radofin was the actual manufacturer of both versions, they continued to produce it for an unknown length of time after Mattel dropped it from their line. There's not even a mention of it on any of the Aquarius references on the web. Jeff jeffh(a)unix.aardvarkol.com -- --------------------------------------------------------------------- Sent from an Amiga 3000..the computer for the creative mind! --------------------------------------------------------------------- Collector of classic home computers: Amiga 1000, Apple II+, Atari 800, 800XL, Mega-ST/2 and XE System, Coleco ADAM, Commodore 128D, 16, Plus/4 and VIC-20, IBM 5155, Kaypro 2X, Mattel Aquarius, Osborne Executive, Radofin Aquarius, Sinclair ZX-81, TI-99/4A, Timex-Sinclair 1000, TRS-80 Color Computer-3, Model 4, and Model 4P, plus Odyssey2, Atari Superpong and 2600VCS game consoles.

29 years

(fwd) FREE: Collection of Early MS-DOS/PC-DOS SW and manuals

by danjo＠xnet.com

A non-text attachment was scrubbed... Name: not available Type: text Size: 2462 bytes Desc: not available Url : http://www.classiccmp.org/pipermail/cctalk/attachments/19970609/6a01d0a8/at…

29 years

How to read/write TRS-80 diskettes from PC?

by allisonp＠world.std.com

> Does anyone know how to read/write TRS-80 Model I format diskettes with > a PC? > > I have a CompatiCard II and a Copy II Option Board. I assume the Option > Board is able to copy TRS-80 diskettes (I hope, just got it this weekend > and haven't tried yet) but I need to actually write files. Sydex 22Disk > appears to support only CP/M formats. TRS-80 disks are single density, single sided, soft sector non-cpm unless after market cpm is installed. The original disk controller was wd1771. There is two form to trs-80 disks those from TRSDOS and those from DiskBASIC. As far as I remember(18 years!) they were compatble with each other. Their structure was very unlike CP/M and it used a FAT style of directory. Now to add to the pain, there were various mods that allowed for double density and even two sided disk drives. If so the controller was wd1793 in the form of a piggy back card. Knowing the controller used is important as some of the system out there created disk formats that are completely unreadable by anything other than a system with 1771/1793! Allison

29 years

TRS-80, etc.

by coslor＠pscosf.peru.edu

Howdy folks: I am writing this to let you know... if you would like to be mailed a very complete listing of TRS-80 hardware and software, just e-mail me with your name and mailing address to coslor(a)bobcat.peru.edu. This listing costists of 65 pages and will be sent via 1st Class mail ASAP. If you would like it even quicker, please send $3 to the address below to cover MOST of the shipping charges... you would then be 'prioritized'. I collect all types of TRS-80 hardware and software, and specialize in games in both original diska nd tape format, as well as converted for use with modern PC emulators. I have a HUGE collection and would like to share this with others. I like to think I have 'nearly' every commercially sold game (and hundreds of others) written for the TRS-80 line of computers. I also have most applications and DOSs ... all for the Model 1,3,4 as well as a limited supply of CoCo hardware and software. I also collect for many other classic systems, including but not limited to: MSX, Colour Genie, Apple ][, Apple ][e, Apple ][c, Apple ][+, Commodore 64, C-16, Vic 20, Plus 4, Atari series, Coleco, Sincalire Spectrum, P2000, and Vectrex systems. All I ask for most of the software is to be compensated for my expenses (postage, media, etc.) and have very low prices on most of my hardware as I have accumulated a large inventory over the years and need to clear my shelves. I am also looking for the following items in particular: 1) YOUR classic hardware and/or software. I am always buying and trading for those item. 2) 80-Micro, TRS-80 Microcomputing News, Computer News 80, and 80-US Journal magazines, etc. 3) Original manuals, instruction, and game boxes concerning the TRS-80 4) Atari 800 - Atari Artist cartridge. A800LX - RX8053. Just please remember, I am always buying, selling, and trading for these hard to find items... even for things not on the above list. If you're looking for something or have some things to offer... PLEASE let me know. I simply love the TRS-80 and other classic machines and would appreciate any help you may be able to provide in expanding my collection. I most gladly will help you out in adding to your own classic computer or game machine collection. Finally, I have ALL my original disk, tape, and cartridge software... for all systems, converted to run on their respective PC emulators! Send me your want lists, request for a catalog, or what you have to offer: via e-mail, United States Postal Service, or give me a call... I look forward to hearing from you. Best Wishes, CORD COSLOR //*=====================================================================++ || Cord G. Coslor P.O. Box 308 - 1300 3rd St. Apt "M1" -- Peru, NE || || (402) 872- 3272 coslor(a)bobcat.peru.edu 68421-0308 || || Classic computer software and hardware collector || || Autograph collector || ++=====================================================================*//

29 years

Cleaning Plastic

by chemif＠mbox.queen.it

At 05:38 09/06/97 -0700, Greg Mast wrote: > > I apologize if this is a repeat question but I can't seem to find the > previous post. > > What were the solutions to removing yellowing from the plastic cases? I > bought a printer that looks terrible. Not sure what caused it so any > suggestions helpful at this point. > > thanks, > > Greg > Hi Greg, I don't know if this will help you in solving cleaning problems, but here is my favourite: FULCRON from AREXONS. I do maintenance and cleaning of computer cases since 10 years (for both job and passion), and i found it to clean jellow stains (caused by nicotine) EVEN BETTER THAN TRIELINE (honestly I find it better than anything else for any kind of dirt exept: paint and ink). It seems to take away the outer layer of jellowing but is not smelling like any petrol derived-solvent. I don't know if you will be able to find it there (AREXONS it's a multinational company, isn't it?), but here in Italy was introduced 3 years ago and now you can find it in any detergent shop. For ink and tape adhesive I use a ISOPROPILIC ALCOOL based product called TERGITUTTO, but this time the company (Sutter) I'm shure it's Italian only, so try to find a similar remedy in your town. Bye Riccardo Romagnoli. Classic Computer Collector Forli' - Italy

29 years

Removing adhesive (RE: Cleaning Plastic)

by kaikal＠MICROSOFT.com

I recommend "3M General Purpose Adhesive Remover", which is inexpensive and comes in a red and white quart-size can that will last you until roughly the year 2020. Some hardware stores carry it, but it's most reliably found at an auto paint supply store (check your local yellow pages). I once used this stuff to remove an entire vinyl top from a '68 Chevy, so I can tell you it really does work, and does not appear to harm either your skin or any kind of plastic. Doesn't smell very bad, and isn't highly flammable. In response to an earlier question, Cameo copper cleaner can be found in most any grocery store or general goods store. Kai > ---------- > From: Sam Ismail[SMTP:dastar@crl.com] > Reply To: classiccmp(a)u.washington.edu > Sent: Monday, June 09, 1997 10:56 AM > To: Discussion re-collecting of classic computers > Subject: Re: Cleaning Plastic > > On Mon, 9 Jun 1997, Mr. Self Destruct wrote: > > > I've always just used those blue brillo pad thingys. They generally > do > > well at taking off a bunch of hard to remove stuff (tape spooge, > stains, > > etc.) Sometimes when I'm REALLY bored I take the keyboard apart > (keycaps, > > etc.) and scrub them up too. Real satisfying to see a 12 year old > machine > > look like new... > > Regarding "tape spooge" (what a great moniker, if not gross) this is > the > bane of my existence. I hate that shit. I went out and got some > stuff > called Goof Off from Home Depot which was supposed to do away with > that > stuff but it didn't work very well. I didn't try it on anything metal > > yet, but most of my problems are with people putting velcro with the > sticky backs on plastic cases. I tried cleaning some plastic with > tape > spooge on it and it just melted the damn thing. Anyone have any > ideas? > > Sam > ---------------------------------------------------------------------- > --------- > Computer Historian, Programmer, Musician, Philosopher, Athlete, > Writer, Jackass >

29 years

Cleaning Plastic

by kaikal＠MICROSOFT.com

Yellowing may be irreversible. I've been thinking of removing all electronics from a case, and soaking it in dilute bleach solution overnight. I did find a great method for removing permanent marker from textured plastic. Cameo copper cleaner powder works great and doesn't harm the texture. For other stains, I use a Scotch Brite pad of the type that says it's safe on fiberglass. I'd sure like to find a good method for cleaning keyboards. Kai > ---------- > From: Greg Mast[SMTP:gmast@polymail.cpunix.calpoly.edu] > Reply To: classiccmp(a)u.washington.edu > Sent: Monday, June 09, 1997 12:10 AM > To: Discussion re-collecting of classic computers > Subject: Cleaning Plastic > > I apologize if this is a repeat question but I can't seem to find the > previous post. > > What were the solutions to removing yellowing from the plastic cases? > I > bought a printer that looks terrible. Not sure what caused it so any > suggestions helpful at this point. > > thanks, > > Greg >

29 years

How to read/write TRS-80 diskettes from PC?

by kaikal＠MICROSOFT.com

Does anyone know how to read/write TRS-80 Model I format diskettes with a PC? I have a CompatiCard II and a Copy II Option Board. I assume the Option Board is able to copy TRS-80 diskettes (I hope, just got it this weekend and haven't tried yet) but I need to actually write files. Sydex 22Disk appears to support only CP/M formats. Any ideas? thanks Kai

29 years

Buzzing PS?

by ds_spenc＠alcor.concordia.ca

Hi, The Apple /// I picked up last weekend has one annoying flaw, and that is a *very* loud power supply, that seems to get louder the longer the machine is powered up. I think this thing becomes even louder than our 1950s-era Westinghouse refrigerator. (OK, perhaps an exaggeration, but the sound seems to carry farther.) There is nothing obviously functionally wrong with the computer - it boots up fine, there's no wavering or glitching in the display, nothing to say that something might be wrong. Except the buzzing. It makes me nervous. Is this noise normal, or is it a sign that something is about to go kablooie? And if something's wrong, is there any way of knowing which part is about to go? It looks like the power supply should be easy to repair, but I don't know what I'm doing with these things. I know it's been stated here that power supplies should be checked before powering anything up, but I don't really know how to do that, and sometimes I'm just too impatient to see my new toys running. Doug Spence ds_spenc(a)alcor.concordia.ca

29 years

C64 CP/M carts (was: Re: Yet another weekend haul story)

by steve＠kennard.keme.co.uk

At 18:08 09/06/97 -0400, you wrote: > >On Mon, 2 Jun 1997, George Lin wrote: > >> At 11:24 PM 6/1/97 -0700, you wrote: >> ><...> >> >> accessories including a CP/M cartridge for C64 >> > >> >A CP/M _carthridge_? Awesome. >> >> I just tried it yesterday. Pretty cool. The Z80 is in the cartridge. The >> package comes with a CP/M 2.2 diskette for 1541 and a condensed CP/M manual >> by Commodore (copyright 1983). There is a K-Mart price tag on the original >> box that reads $54. Not bad. > >This reminds me... I also have a Z80 cartridge for the C64. But it's not >the one from Commodore. It's from a company called DATA 20 Corporation. > >I haven't been able to get it to work. It has what looks like a connector >for a power supply on the back, but I didn't get the PS with it. It also >came without any disks, though it did have a cassette in the box with it, >which says "Use side A for Commodore 64/Use side B for VIC 20". > >It's a Z-80 Video Pak, that combines the Z80 processor AND an 80-column >display adapter into one (big fat) cartridge. > >To quote from the box: > > The Z-80 Video Pak brings the convenience of an 80 column screen and > the power of a CP/M compatible operating system to the Commodore 64. > > Designed to be used with a monitor, the Z-80 Video Pak lets the > Commodore 64 owner switch to a 40 or 80 column screen in black and > white, or back to the standard color screen. All switching is done > through software and no cables need to be moved. > > The Z-80 Video Pak has its own Z-80 microprocessor and operating > system which allows the 64 to run CP/M software formatted for the > Commodore 1541 disk drive. A Terminal mode which brings communication > with central data bases is included at no extra cost. The Z-80 Video > Pak also supports the advanced screen handling features of all Video > Pak models such as erase to the end of line, erase to end of screen, > and dump screen to printer. > > >If anyone out there knows this thing's power requirements (AAAGH! Another >wall-wart!) and where to get CP/M disks in 1541 format, please tell. :) > > >Doug Spence >ds_spenc(a)alcor.concordia.ca > >Hi you lot in the USA. I have a Boxed CPM cart and Disk Commodore Original, Anybody want it?? Emulator BBS 01284 760851 Keeping 8-Bit ALIVE

29 years

Yet another weekend haul story

by george.lin＠documentum.com

I responded to a Usenet post regarding some UCSD P-Code stuff. It turned out the guy had a garage of other stuff that he was trying to get rid of. Here's what I got in two carloads: o 1 Kaypro II, 1 Kaypro 2X (dead--for parts), 1 Kaypro 4 o 1 boxed Commodore 64, 1 Commodore 128, plus a bunch of Commodore accessories including a CP/M cartridge for C64 o 1 Osborne Executive o 1 Compaq suitcase o 1 Atari 520ST (dead--for parts), 1 Atari 1040ST, 1 boxed Atari Falcon030, plus 2 Atari RGB monitors and other Atari accessories o 1 boxed Timex Sinclair 1000 o 1 TRS-80 Model 1 with expansion interface and disk drive o 1 Vector 4 o 2 Apple IIc's, one of them is a rare prototype o 20 Xerox paper cartons full of original software on disks/tapes for the above systems, manuals, out-of-print computer books, and old computer magazines The price? Free. George P.S. My back still hurts. -- ______________________________ ______________________________ / /\ / /\ / George Lin _/ /\ / Opinions expressed in this _/ /\ / Antique Computer Collector / \/ / message do not necessarily / \/ / http://museum.home.ml.org /\ / reflect my employer's. /\ /_____________________________/ / /_____________________________/ / \_____________________________\/ \_____________________________\/ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ Apple IIe, IIc, Mac 512K, Atari 800, 800XL, 1040ST, Falcon030, VCS, 5200, ColecoVision VGS, Commodore 64, 64C, 128, plus/4, Compaq, Eagle II, KayPro II, 4, Nintendo NES, Osborne Executive, TI 99/4A, Timex Sinclair 1000, 1500, TriGem SLT-100, TRS-80 Model I, III, 100, Color Computer 2, Vector 4.

29 years

Removing adhesive (RE: Cleaning Plastic)

by K.J.Whitehead＠massey.ac.nz

>On Mon, 9 Jun 1997, Kai Kaltenbach wrote: > >> I recommend "3M General Purpose Adhesive Remover", which is inexpensive >> and comes in a red and white quart-size can that will last you until >> roughly the year 2020. Some hardware stores carry it, but it's most >> reliably found at an auto paint supply store (check your local yellow >> pages). >> >> In response to an earlier question, Cameo copper cleaner can be found in >> most any grocery store or general goods store. > >Ok, there have been so many cleansers thrown around in the last 12 hours >that I think its time to compile a list of these with their respective >uses and throw it in the FAQ. > >Sam >------------------------------------------------------------------------------- >Computer Historian, Programmer, Musician, Philosopher, Athlete, Writer, Jackass Well you can add CRC 226 and 556, They don't harm platics (actually they give it a nice gloss if you like that sorta thing) Works really well on these "permanant" paper labels. Cheers +----------- Keith Whitehead -----------+ | Physics and Chemistry Depts | | Massey University | | Palmerston North | | New Zealand | | | | Ph +64 6 350-5074 Fax +64 6 354-0207 | +------------------------------------------+

29 years

Radofin Aquarius

by thedm＠sunflower.com

Wish I had one. ---------- > From: Sam Ismail <dastar(a)crl.com> > To: Discussion re-collecting of classic computers <classiccmp(a)u.washington.edu> > Subject: Re: Radofin Aquarius > Date: Monday, June 09, 1997 3:41 PM > > On Mon, 9 Jun 1997, Jeff Hellige wrote: > > > Of course, Sam and others have taken to talking about the Mattel Aquarius > > lately, but I've never seen a mention of the Radofin version, which other than > > the lack of 'Mattel' logos and the change to the model number and label on the > > bottom of the machine, is identical. Were many of them sold? Does anyone > > else out there have one? About all I've been able to learn is that since > > Radofin was the actual manufacturer of both versions, they continued to > > produce it for an unknown length of time after Mattel dropped it from their > > line. There's not even a mention of it on any of the Aquarius references on > > the web. > > I'd never even heard of it until you mentioned it to me previous. I > would think that it's kinda rare. > > Sam > ---------------------------------------------------------------------------- --- > Computer Historian, Programmer, Musician, Philosopher, Athlete, Writer, Jackass

29 years

Buzzing PS?

by thedm＠sunflower.com

I have a /// for parts! ---------- > From: Doug Spence <ds_spenc(a)alcor.concordia.ca> > To: Discussion re-collecting of classic computers <classiccmp(a)u.washington.edu> > Subject: Re: Buzzing PS? > Date: Monday, June 09, 1997 4:21 PM > > > On Fri, 30 May 1997, A.R. Duell wrote: > > > > Hi, > > > > > > The Apple /// I picked up last weekend has one annoying flaw, and that is > ^^^ > > > a *very* loud power supply, that seems to get louder the longer the > > > machine is powered up. > > <snip> > > > > Is this noise normal, or is it a sign that something is about to go > > > kablooie? And if something's wrong, is there any way of knowing which > > > part is about to go? > > > > No it's not normal. The Apple uses a switching type supply, and there > > shouldn't be any 60Hz waveforms anywhere after the mains > > rectifier/smoothing cap. If it's buzzing there is a problem > > OK, here's a question from an electronics-know-nothing (which hopefully > isn't in the FAQ, else I'll look like a complete idiot :) ): How do I > tell the difference between a switching supply and a linear supply? Just > from looking at it. > > I get the idea that linear supplies have honking big transformers in them, > and switching supplies don't. > > > It _may_ be nothing more than the mains filter coil (if it has one), or it > > may be a dried up smoothing capacitor (the 2 big ones rated at about 300V) > > that needs replacing. You could try those first. > > I don't remember there being any very large capcitors. (Nothing like in > my PET 2001, anyway... hooo boy! ;) ). I'll take another look inside to > see if I can spot the ones you're talking about. > > <snip> > > > Apple PSUs are easy to check. The 6 way cable unplugs from the main board, > > and the wiring is given in the Apple ][ reference manual. Just connect a > > voltmeter between the +5V output and the ground wire (red and black?) and > > power up. I don't think you need a dummy load. If you don't get 5V when > > you power up, you need to sort out that PSU. > > Well, the ][ and /// use different connectors, but I noticed that the > ///'s supply has info on the PCB. > > The supply works, BTW. As I mentioned, the system powers up and runs as > if nothing were wrong. The noise the power supply makes just makes me > nervous. > > > -- > > -tony > > ard12(a)eng.cam.ac.uk > > The gates in my computer are AND,OR and NOT, not Bill > > Doug Spence > ds_spenc(a)alcor.concordia.ca

29 years

Cleaning boards/keyboards

by allisonp＠world.std.com

> Bill mentions sticking a keyboard in a dishwasher. Bill, I assume you've > done this, and it's OK? I would think that with the heat of drying and > all it would kill the components. Over the years I've done this to de-crud boards, keyboards and equipment dropped in salt water. Water generally will not harm electronics save for stuff made of paper liek speakers. The real problem is insuring it is completely dry after cleaning. A warm, under 180F oven works for this. Removing keycaps and the like first is a good thing. Also some keyboards by their contruction will trap water if it gets in and baking it out is the only way short of sometimes destructive disassembly. FYI, water gets coffee out the best if there ie a small amout of soap to break surface tension. Try to use soaps that are not chemically active and corrosion forming. Woolite is good in the sink for this and most dishwasher soaps are ok. Logic boards like DEC modules, motherboards and the like clean well in the dishwasher. I've done boards in the sink with a soft bristle brush and woolite and dried them by blotting with several paper towels and oven dry. The sometimes look better than new. Remember (not a joke!) Rinse well when doing this. FYI: resist the temptation to vacuum as the moving air can cause static charges that can do subtle and long term damage to ICs, even ttl. Dishwasing is actually safer. Allison

29 years

Teaneck Findings

by allisonp＠world.std.com

> > > DEC KBD01 - a true whatsit - 8085 based, in one of the LSI-11/2 deskto > > > boxes, RS-232 (maybe) and another D connector on back. Any clues? I > > > no clue. (I purchased this as well) > > > > IF the box is a BDV11VA (or that size 13x12x4.5) it's a remote diagnosti > > port. Plugs in to the console port and does a modem link for remote use. > > For VAXen with that Remote Diagnostic Module? For late PDP-11s/vax11s and it plugged into the console port and subbed for same. By doing that all boot console functions were available even if the system was otherwise down. Not all PDPs supported this. An old item. Allison

29 years

Cleaning Plastic

by thedm＠sunflower.com

I've found that instead of bug and tar remover, I use charcoal starter. Originally I used this on my car, at .79cents vs 3.bucks. Works well on machines too. To remove stenciling on computers I use fingernail polish remover, BUT DON'T get it on printed LOGOS! Bill ---------- > From: Tim Shoppa <shoppa(a)alph02.triumf.ca> > To: Discussion re-collecting of classic computers <classiccmp(a)u.washington.edu> > Subject: Re: Cleaning Plastic > Date: Monday, June 09, 1997 2:25 PM > > > Regarding "tape spooge" (what a great moniker, if not gross) this is the > > bane of my existence. I hate that shit. I went out and got some stuff > > called Goof Off from Home Depot which was supposed to do away with that > > stuff but it didn't work very well. I didn't try it on anything metal > > yet, but most of my problems are with people putting velcro with the > > sticky backs on plastic cases. I tried cleaning some plastic with tape > > spooge on it and it just melted the damn thing. Anyone have any ideas? > > I've got a bottle of stuff labeled "Bug and Tar remover" that seems to > work just fine for me. I bought it several years ago, and it's > chock-full of all sorts of hydrocarbons and ketones. If environmental > regulations haven't completely banned the sale of this stuff, I'd > expect you can still find it in automotive stores. > > Many of the fluorocarbon-based cleaners did a better job on sticker > residue, but these are all but impossible to get anymore. > > Tim. (shoppa(a)triumf.ca)

29 years

old hardware

by foxvideo＠mail.wincom.net

Last fall I was given the remains of something(?) from a local municipal office. It has been in my garage all winter, and since our Canadian weather has finally warmed up a bit, I went out to have a look. The only identification that I can reach is on the two drives which are a few hundred pounds each and are Century Data Systems Model T80 A's. Can anyone tell me anything about them? There is also another rack about the same size, but it is buried in other junk and is not accessable. The deal also included a Calcomp 1041 plotter which runs the test plot, but doesn't want to talk to my Windows 95/486. Regards Charlie Fox

29 years

This weekend's haul

by sinasohn＠crl.com

At 11:43 PM 6/8/97 +0100, you wrote: >>This weekend was pretty quiet, though I did pick up a couple >>ColecoVision cartridges, including 'Turbo' with the 'Expansion Module I managed to pick up an "HP Touch Accessory" (a touch screen add-on) new in the box and (though it's not really a computer) an Interactive Network console also in the box. I'm happy to find this list too! --------------------------------------------------------------------- O- Uncle Roger "There is pleasure pure in being mad sinasohn(a)crl.com that none but madmen know." Roger Louis Sinasohn & Associates San Francisco, California http://www.crl.com/~sinasohn/

29 years

Misc.

by allisonp＠world.std.com

> I have a bit of DEC stuff including a Minc (I think that is the correct > spelling) that I have no idea what it was used for, a couple of 11/23s, Labratory computer designed for easy interface to programable instruments and other experiments. Allison

29 years

Chisolm

by hans1＠filan00.grenoble.hp.com

On Fri, 6 Jun 1997 Marvin Johnston wrote : > Wow, I think I am beginning to like this listserver! Only just beginning ;-) > It has an LCD screen with a decent keyboard on it. So far so good... > The size is approximately 12" wide x 8" > deep x 5" high and the LCD screen folds up typical of a portable. > It has a couple of standard bus size cards (one is missing) but uses > the header type connector (2 x 50?) instead of the gold fingers to > plug into the backplane. Nope, not a Gavilan which was was only a couple of inches tall and had no internal slots (for cards at least). > If this is a Gavilan, are docs, schematics, and parts still available? I doubt it, there used to be quite an active Gavilan group in Silicon Valley many years ago and if anyone has need I can try and dredge up some long forgotten names... Hans B Pufal

29 years

Olivetti XP 1050/SP

by dastar＠crl.com

I saw an Olivetti XP 1050/SP that I passed up the other day cuz it looked like a common PC clone type dealy. Anyone have any information on this? Sam ------------------------------------------------------------------------------- Computer Historian, Programmer, Musician, Philosopher, Athlete, Writer, Jackass

29 years

Dead PET for free

by dastar＠crl.com

Here's another one. Hope someone finds a use for this... Sam ------------------------------------------------------------------------------- Computer Historian, Programmer, Musician, Philosopher, Athlete, Writer, Jackass ---------- Forwarded message ---------- Newgroups: comp.sys.cbm Subject: (fwd) Take my PET, please! Ok, forgive the corny subject line... I have a C=PET 4016 here that is in a serious state of disrepair. When I got it, it wasn't working and I tried to fix it up to no avail. In it's current state, it's little more than a big metal & plastic paperweight to me. I'm GIVING IT AWAY (You pay S&H) to anyone on one condition: That you try to fix 'er up or use the parts to fix another commodore computer. I don't want to see this go to the dumpster, folks. It deserves better. I'm even willing to throw in a few C64 disks for taking it away :) If interested, respond via email - dross4(a)niu.edu Dave Ross / Doc Watson | "Make me one with everything," said the dross4(a)niu.edu | Zen Buddist to the hot dog vendor. - - - - - - - - - - - -+- - - - - - - - - - - - - - - - - - - - - - - - Long live the C=64/128!| http://www.cs.niu.edu/~z956832/homepage.htm -- Sam ------------------------------------------------------------------------------- Computer Historian, Programmer, Musician, Philosopher, Athlete, Writer, Jackass

29 years

Introduction

by BROBSTONA＠wartburg.edu

>My story mirrors yours. I, too, learned on the Aquarius, and I loved >it. I then moved on to the Apple ][+. I have few regrets in my life, >but of the more nerdy ones, I regret ever selling my Aquarius to finance >the purchase of my Apple ][+. I had all the peripherals for it >(including the thermal printer and datasette, and of course the expansion >module with controllers and a 4K RAM carthridge). I didn't have quite as much for it, probably. I had the mini-expander with controls, and four cassettes, which I think were D&D Treasures of Tarmin, Utopia, Night Stalker, and Biorhythms. I got Chess later as a gift. I didn't have the "official" data recorder, but I got a regular tape recorder to work once in a while for storage. I remember writing programs for it. I remember also typing in that what-seemed-so-long "Digital Clock" program from the manual. I left out all the REM statements because they were "optional," I thought from my programming experience and what the manual said. I didn't realize that all the branching statements went to those REM's. Eventually, I got it to work, and I thought it was really neat. I was easily entertained at age seven. When my parents' friends came over, their two kids and I had Utopia tournaments. Often, they got very mean, and we'd end up fighting because "you broke the agreement about not sinking my fishing boat," and one of us would retaliate by putting rebels on the other's island with all our money until the game got pointless because no one had anything left. I may still have the price list around somewhere - I know I had it a long time after buying anything would have been an option, but I don't know if it got thrown out or not. I bugged my parents about getting me a printer for it, but they never did, and I didn't have any money of my own (I was only between about six and eight). In my original list of computers, I forgot my Atari 2600, possibly because I didn't consider it a computer, but rather a video game machine. (Wasn't there a keyboard setup of some sort that you could get for it? I could be wrong about that.) I still have that at home, too. I don't remember all the games I had for it. I remember being really mad that the "Indy 500" "driving controls" wouldn't work as paddles with Warlords, and I never got the real paddle controls. I think we took Warlords back to the store. (I could, again, be mistaken about all these titles...) >Ahhhh, I miss those days. I hear ya! -- Andy Brobston brobstona(a)wartburg.edu http://www.wartburg.edu/personalPages/BrobstonA/home.html My opinions do not necessarily reflect the opinions of Wartburg College as a whole.

29 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb