test-drb

test-drb@ccmp.vtda.org

101090 discussions

HP-01 calc watch go withs - brochures, t- shirts, booklets, ad copy who else collecting?

by couryhouse＠aol.com

OK ?Marc.. guess, ?patent ran out. this was eons ago I was involved initally... ?so thus my dated ?"who had and not ?list"... remember the leitz episcopic.. ? phase contrast? system... ighhh...!, ?have,an otholux set up like that... another fun one is the Wild m20 ?with episcopic... bright field AND darkfield. Marc .. yes... as u said....Nomarski microscopy, is Differential phase contrast microscopy. Makes very small height differences (partial wavelength) on mostly planar objects pop out, and creates amazing color effect.... ?the francon yamotto method seems simular in images,and colors... ? -----Original Message----- From: Curious Marc <curiousmarc3 at gmail.com> To: COURYHOUSE at aol.com <couryhouse at aol.com>; cctalk at classiccmp.org <cctalk at classiccmp.org>; spacewar <spacewar at gmail.com> Sent: Mon, May 20, 2019 10:36 PM Subject: Re: HP-01 calc watch go withs - brochures, t- shirts, booklets, ad copy who else collecting? #yiv6703816687 #yiv6703816687 -- _filtered #yiv6703816687 {panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv6703816687 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} #yiv6703816687 #yiv6703816687 p.yiv6703816687MsoNormal, #yiv6703816687 li.yiv6703816687MsoNormal, #yiv6703816687 div.yiv6703816687MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;} #yiv6703816687 a:link, #yiv6703816687 span.yiv6703816687MsoHyperlink {color:blue;text-decoration:underline;} #yiv6703816687 a:visited, #yiv6703816687 span.yiv6703816687MsoHyperlinkFollowed {color:purple;text-decoration:underline;} #yiv6703816687 p.yiv6703816687msonormal0, #yiv6703816687 li.yiv6703816687msonormal0, #yiv6703816687 div.yiv6703816687msonormal0 {margin-right:0in;margin-left:0in;font-size:11.0pt;font-family:sans-serif;} #yiv6703816687 span.yiv6703816687EmailStyle18 {font-family:sans-serif;color:windowtext;} #yiv6703816687 .yiv6703816687MsoChpDefault {font-size:10.0pt;} _filtered #yiv6703816687 {margin:1.0in 1.0in 1.0in 1.0in;} #yiv6703816687 div.yiv6703816687WordSection1 {} #yiv6703816687 Nomarski microscopy, Ed. Differential phase contrast microscopy. Makes very small height differences (partial wavelength) on mostly planar objects pop out, and creates amazing color effects as a biproduct. Pretty much a stalwart of any good cleanroom microscope. Every manufacturer offers it, usually a pretty expensive option as all your optics have to be stress-free. I dream to own one of these one day. Marc ? From: cctalk <cctalk-bounces at classiccmp.org> on behalf of "cctalk at classiccmp.org" <cctalk at classiccmp.org> Reply-To: "COURYHOUSE at aol.com" <couryhouse at aol.com>, "cctalk at classiccmp.org" <cctalk at classiccmp.org> Date: Monday, May 20, 2019 at 11:20 AM To: "COURYHOUSE at aol.com" <couryhouse at aol.com>, <spacewar at gmail.com>, "cctalk at classiccmp.org" <cctalk at classiccmp.org> Subject: Re: HP-01 calc watch go withs - brochures, t- shirts, booklets, ad copy who else collecting? ? should? say ?Francion Yamamotto? ?not ?Yrancion Yamamotto? ? ? In a message dated 5/20/2019 10:07:04 AM US Mountain Standard Time, couryhouse at aol.com writes: Since? we? have? nice? microscopes at? the museum? project? we? were? hired? to? photo? some IC? innards? years? back. This? ended? up? becoming? a minor obsession? for? a short? time? as? the? artwork under? various? illuminations? is? fantastic.?? ? ? One of the things? that? seemed? to show the mots? difference in? detail between layers and highs? etc... was? differential? interference contrast? (after? nomorski (sp?) ( this? was on our? Ziess Ultraphot? and? seems? to be? a Zeiss? only? ? offering.0? ?on? the? Japanese? side of? things? Nikon? had? ?Yrancion Yamamotto (sp?)? method? which? seems? ?nice? ? but? I? preferred? the? ?Nomeriski. Using? these? ?methods? you? may be? able? to extract? more usable? detail? ?than? with traditional methods.? ?and? wow? the? color? photos? are? ?frame-able! But? ?kinda? what? I? wanted to mention? to is? depending? on? what? era? ?the chips? were? the? over? coatings? ? seemed? to? worsen? the view? the newer the chip? or? so? I? thought at the? time. ? ? ? Such? great? ?fun? to? photo? ?the? little? ic innards!? ?even? a? standard? ?illum.? ?scope? with the? vertical? episcopic? illumination? gives? ?some? ? fun? photos? too,? especially? on the? earlier? ?chips. ? Don't? know? if? any? of? ?this? will help on the? HP-01? roms? but? sure? was? fun to talk about? again ed sharpe archivist for? smecc ? ? ? ? ? In a message dated 5/20/2019 9:00:09 AM US Mountain Standard Time, spacewar at gmail.com writes: Only just within the last month I finally obtained a ROM dump from a production HP-01, for potential use in my Nonpareil simulator. Previously I only had the preproduction code listed in a US patent. I'm not sure when I'll have time to actually work on the simulation, though. My original plan had been to crack open an HP-01 module and try to read the ROM bits optically, as Peter Monta did for the HP-35. However, that didn't work, probably due to a passivation coating on the ROM dies. ?

7 years

HP-01 calc watch go withs - brochures, t- shirts, booklets, ad copy who else collecting?

by couryhouse＠aol.com

should? say ?Francion Yamamotto? ?not ?Yrancion Yamamotto? In a message dated 5/20/2019 10:07:04 AM US Mountain Standard Time, couryhouse at aol.com writes: Since? we? have? nice? microscopes at? the museum? project? we? were? hired? to? photo? some IC? innards? years? back. This? ended? up? becoming? a minor obsession? for? a short? time? as? the? artwork under? various? illuminations? is? fantastic.?? One of the things? that? seemed? to show the mots? difference in? detail between layers and highs? etc... was? differential? interference contrast? (after? nomorski (sp?) ( this? was on our? Ziess Ultraphot? and? seems? to be? a Zeiss? only? ? offering.0? ?on? the? Japanese? side of? things? Nikon? had? ?Yrancion Yamamotto (sp?)? method? which? seems? ?nice? ? but? I? preferred? the? ?Nomeriski. Using? these? ?methods? you? may be? able? to extract? more usable? detail? ?than? with traditional methods.? ?and? wow? the? color? photos? are? ?frame-able! But? ?kinda? what? I? wanted to mention? to is? depending? on? what? era? ?the chips? were? the? over? coatings? ? seemed? to? worsen? the view? the newer the chip? or? so? I? thought at the? time. Such? great? ?fun? to? photo? ?the? little? ic innards!? ?even? a? standard? ?illum.? ?scope? with the? vertical? episcopic? illumination? gives? ?some? ? fun? photos? too,? especially? on the? earlier? ?chips. Don't? know? if? any? of? ?this? will help on the? HP-01? roms? but? sure? was? fun to talk about? again ed sharpe archivist for? smecc In a message dated 5/20/2019 9:00:09 AM US Mountain Standard Time, spacewar at gmail.com writes: Only just within the last month I finally obtained a ROM dump from a production HP-01, for potential use in my Nonpareil simulator. Previously I only had the preproduction code listed in a US patent. I'm not sure when I'll have time to actually work on the simulation, though. My original plan had been to crack open an HP-01 module and try to read the ROM bits optically, as Peter Monta did for the HP-35. However, that didn't work, probably due to a passivation coating on the ROM dies.

7 years

Pleas ID this IBM system....

by jos.dreesen＠greenmail.ch

The seller clearly has no idea, but the starting price is right ! https://www.ebay.de/itm/seltene-Anlage-Puma-Computer-IBM-2020/202646831828?… Jos

7 years

Looking for my old ADM-3A

by charlesmorris800＠centurytel.net

I used to have an ADM-3A Dumb Terminal... fixed it up, and made my own lower-case ROM from a 2716 EPROM and a lot of small wires. Sold it around 2005 or so, but can't remember who bought it. Anyway I'd like to buy it back if the current owner is out there and isn't using it :) Thanks Charles --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

7 years

M7264 Troubleshooting

by jnc＠mercury.lcs.mit.edu

> From: Mister PDP > After a day of confusing and mixed up signals (I don't really use > this type of equipment very often) .. I switched over to the > oscilloscope Don't feel bad, I too prefer to rely on an oscilloscope by default; not only does it let you see what's really happening (intermediate voltages, noise, etc) but it's simpler, and there are less ways to get incorrent info. > to confirm that the four clock signals on the MCP-1600 chipset were > working properly .. and was able to see that the very basics of the > CPU were working. It's not necessarily good if the 4 clocks (I take it that's what the latter refers to) are working, because if one or more of those were broken, it's a relatively easy/simple fix, whereas if they are working, and the CPU's still not running, it could be a failed CPU chip, and the only fix there is to replace it. > the SRUN signal coming off of the backplane. Note that SRUN isn't crucial to the machine's operation, it's just user info. If SRUN is somehow broken on it's own (i.e. failed component somewhere between where the CPU generates it, and the display LED) finding and fixing that issue won't help. Far more useful, in terms of getting the thing running, would be to know if BSYNC on the QBUS is hopping around (as ODT tries to talk to the console - an easy thing to check into, too). If not, that's a show-stopper that needs to be looked into. > From: Glen Slick > the SRUN L signal is driven on to the backplane bus line AF1. The '78-'78 "microcomputer processors" says (pg. 3-15) that on the LSI-11 it's also on CH1; just to complete the complexity, it also says (pg. 3-32) that on the LSI-11/2 it's also on AH1! > From: Mister PDP > I hooked the oscilloscope up to SRUN off of E68, and found that it > oscillates low at 58.68KHz. .. Hitting the Run/Halt switch does not > have any effect on the period or amplitude of the oscillation. So maybe the CPU is actually running after all? Although turning RUN/HALT to 'HALT' should stop it - the Run light would I think go out when ODT is running. (It certainly does on the /23.) Can you check that BHALT on the QBUS is actually asserted (i.e. 0V) when the switch is in HALT? Noel

7 years

HP-01 calc watch go withs - brochures, t- shirts, booklets, ad copy who else collecting?

by couryhouse＠aol.com

Since? we? have? nice? microscopes at? the museum? project? we? were? hired? to? photo? some IC? innards? years? back. This? ended? up? becoming? a minor obsession? for? a short? time? as? the? artwork under? various? illuminations? is? fantastic.?? One of the things? that? seemed? to show the mots? difference in? detail between layers and highs? etc... was? differential? interference contrast? (after? nomorski (sp?) ( this? was on our? Ziess Ultraphot? and? seems? to be? a Zeiss? only? ? offering.0? ?on? the? Japanese? side of? things? Nikon? had? ?Yrancion Yamamotto (sp?)? method? which? seems? ?nice? ? but? I? preferred? the? ?Nomeriski. Using? these? ?methods? you? may be? able? to extract? more usable? detail? ?than? with traditional methods.? ?and? wow? the? color? photos? are? ?frame-able! But? ?kinda? what? I? wanted to mention? to is? depending? on? what? era? ?the chips? were? the? over? coatings? ? seemed? to? worsen? the view? the newer the chip? or? so? I? thought at the? time. Such? great? ?fun? to? photo? ?the? little? ic innards!? ?even? a? standard? ?illum.? ?scope? with the? vertical? episcopic? illumination? gives? ?some? ? fun? photos? too,? especially? on the? earlier? ?chips. Don't? know? if? any? of? ?this? will help on the? HP-01? roms? but? sure? was? fun to talk about? again ed sharpe archivist for? smecc In a message dated 5/20/2019 9:00:09 AM US Mountain Standard Time, spacewar at gmail.com writes: Only just within the last month I finally obtained a ROM dump from a production HP-01, for potential use in my Nonpareil simulator. Previously I only had the preproduction code listed in a US patent. I'm not sure when I'll have time to actually work on the simulation, though. My original plan had been to crack open an HP-01 module and try to read the ROM bits optically, as Peter Monta did for the HP-35. However, that didn't work, probably due to a passivation coating on the ROM dies.

7 years

M7264 Troubleshooting

by vintagecomputersmn＠gmail.com

This is a continuation of my post from about a week and a half ago. The weekend I had some free time, so I returned, armed with a oscilloscope and logic analyzer, to try and figure out what is wrong with my H11A. At first, I tried to use the logic analyzer to confirm that the four clock signals on the MCP-1600 chipset were working properly. After a day of confusing and mixed up signals (I don't really use this type of equipment very often), I realized that my logic analyzer was picking up the signals incorrectly. I switched over to the oscilloscope and was able to see that the very basics of the CPU were working. After that, I decided to try and find out why the Run/Halt light was not coming on when I hit the switch. Looking at the H11 schematics, the light relies on the SRUN signal coming off of the backplane. The problem I am currently facing is I cannot find where the CPU board generates the SRUN signal. If anyone who is more experienced that me knows how the M7264 generates the SRUN signal, that would be wonderful. Thank You, Gavin

7 years

VT420 terminal screen

by petermallan＠gmail.com

I have a DEC VT420 terminal which works pretty well. However, I am concerned that sometimes the characters on the screen seem to get torn sideways and jump around a little on a timescale of less than one second. My guess is that there is some issue with the power supply, but that is just a guess. Does anyone have any experience of this and know what I should look at in order to fix it. If it never gets worse, I can live with it, but I fear that one day it will just die. Cheers Peter Allan

7 years, 1 month

Tape seals?

by tshoppa＠wmata.com

Just a reminder: "Tape seal" is a generic name (or defunct trademark?) for the wrap-around plastic tape hanger for half-inch magtape reels. There's a flexible white (soft plastic) or beige (hard plastic) belt with a clamp (sometimes black) and a hanger. They usually had a little place to put a label in them too. They usually came with a new reel of tape but you could also buy them by themselves. 20 years ago I had thousands of 9-tracks hanging from decaying tape seals. Every couple days I would find a couple of tapes dropped to the floor and their tape seal broken. At the time it was no problem to find surplus tapes with recent tape seals to rehang them, and tape seals were still available new. Most of mine came from Southern California where I think the ozone in the atmosphere severely limited useful life of the plastics. Here in 2019 I only have a few dozen tapes and few remaining tape seals. I suspect any source I found of tape seals would be selling 20-year old tape seals. Is there any outfit that sells "new tape seals"? Or a preferred better way to hang tapes in 2019? It wouldn't surprise me if an archivist told me hanging tapes was the wrong way to store them but I never have really noticed (temperature/humidity changes seem to be a way bigger problem than storage orientation). P.S. Yes all these tapes were imaged decades ago. Not really sure why I still have them around unless say I need to boot a PDP-11 or VAX OS from 9-track which I guess hasn't happened in at least a decade for me. Tim N3QE

7 years, 1 month

HP-01 calc watch go withs - brochures, t- shirts, booklets, ad copy who else collecting?

by couryhouse＠aol.com

at the? time,? the hp-01 was? discontinued? when i? became a? dealer.? for the? calc/ hppc? ?line.? ? one? is? well? worn? and? ?could? ?be? ?sold/traded? ? the other? ?i? got? as? new? condition? and just? ?wore? to? hp 3000? conferences? etc.? and? will remain? with the museum... Yea? might? ?be? ?fun? to look? for? some of those other? ones? ?you? mention... but the HP? ?one is? ? our? main? ? thing? we? cluster? ad? materials and go withs? around. We? ?do? have a? ?few? ?extra? go withs? and? adverts? etc. to off? at? some? point and? yes,? ?have the? tee shirt? from the? Corvallis? pipnic? (no misspelling) Ed# In a message dated 5/19/2019 3:50:27 PM US Mountain Standard Time, cctalk at classiccmp.org writes: I never had an HP-01. But, I had several Casio CFX-40 and CFX-400 (wristwatch scientific calculator with "programmer" features (hexadecimal, octal, etc.) I replaced broken case on a few, including Bob Wallace's.? Probably still have some.? underneath everything else. A number of years ago (2002), Scott Mueller (author of "Reapair And Upgrade PC") had some extras of those that he was selling. I have an Epson RC-20 wrist computer (Z80-like, RAM, ROM, serial port, touch screen)? Never imported into USA, so I had to learn to read some katakana. But, the book had example programs, with Z80 mnemonics. NO, nobody has ported CP/M to it. There was a Seiko "smart" watch, that had a "candy-bar" keyboard. Gave that away. I have a Fossil watch, which runs Palm Pilot OS.? It is here and handy. It responded when I plugged in the charger!? I'll give it a day to see if it charges. I have numerous OQO (SNAZZY! 4x5x1 inch XP computer) MOST of the big pile of lithium batteries that I have for them will probably not charge.? They refuse to try if below low threshold, but sometimes a little jump will get them started, and charge up. BTDTHTSFP Been There Done That Had T-Shit Form the Picnic On Sun, 19 May 2019, ED SHATTNER via cctalk wrote: > heh! none? ?for? ?you? ?fred > > In a message dated 5/18/2019 7:04:22 PM US Mountain Standard Time, cctalk at classiccmp.org writes: > t-shits form those picnic events. > > > On Sat, 18 May 2019, ED SHATTNER via cctalk wrote: >> HP-01 calc watch go-withs - brochures, t- shirts, booklets, ad copy who >> else collecting? >> We have a? ?few? ?spare? ?items? ? has? anyone? put? >> together? a? checklist? of? ?go-withs? >> Apparently? there? was a? ?series? of? ?picnics and? t-shits? >> that? came? form those? events. >> >> Drop? ? us? a? note? off list --? >> ?Thanks? Ed# >> (Fondly? remembering the? days? ?Jerry and? I? would? shake? our? HP-01s? at? each other at? ?3000? meetings...) > -- Fred Cisin? ? ? ? ? ? ? ? ? ? ? cisin at xenosoft.com XenoSoft? ? ? ? ? ? ? ? ? ? ? ? http://www.xenosoft.com PO Box 1236? ? ? ? ? ? ? ? ? ? (510) 234-3397 Berkeley, CA 94701-1236

7 years, 1 month

HP-01 calc watch go withs - brochures, t- shirts, booklets, ad copy who else collecting?

by couryhouse＠aol.com

heh! none? ?for? ?you? ?fred In a message dated 5/18/2019 7:04:22 PM US Mountain Standard Time, cctalk at classiccmp.org writes: t-shits form those picnic events. On Sat, 18 May 2019, ED SHATTNER via cctalk wrote: > HP-01 calc watch go-withs - brochures, t- shirts, booklets, ad copy who > else collecting? > We have a? ?few? ?spare? ?items? ? has? anyone? put? > together? a? checklist? of? ?go-withs? > Apparently? there? was a? ?series? of? ?picnics and? t-shits? > that? came? form those? events. > > Drop? ? us? a? note? off list --? > ?Thanks? Ed# > (Fondly? remembering the? days? ?Jerry and? I? would? shake? our? HP-01s? at? each other at? ?3000? meetings...)

7 years, 1 month

11/93 Rebuild

by rodsmallwood52＠btinternet.com

Hi Guys ?????? Well the RD53 in my 11/93 finally clapped out. ?????? The CPU is a late model KDJ11-E with everything on the one board. ?????? So its a switch from MFM to SCSI Drives. ?????? A CQD220A will drive the hard disk and the RQDX3 will stay to look after the RX50 ?????? I've? put the Hard Drive on the primary CSR address (17772150) and I will shift the RQDX3 to an alternate CSR ?????? Comments as to if this is the right way round and what CSR's to use for the two controllers invited. ????? Rod --

7 years, 1 month

"industrial" PDP-11

by jnc＠mercury.lcs.mit.edu

From: Paul Anderson > They did make the RT100, RT340, etc. which were rugidized versions or > the VTs. We also ran into a VT52 (I think, although possibly it was a VT100) which apparently had been TEMPEST secured; the inside of the casing had been coated with a metallic film. (Or perhaps it was built to operate in an environment with a high E-M radiation level, and kept stuff out, not in.) I don't recall anything else about it now, alas - it's been almost 40 years! Noel

7 years, 1 month

Kaur Collection Inventory

by athornton＠gmail.com

7 years, 1 month

ISO Network General Sniffer 5.x manual set

by aek＠bitsavers.org

I've been working on archiving two Sniffers (ethernet and wan) and was wondering if anyone had a spare manual set. I have access to a set, but it is bound and would have to be scanned a page at a time

7 years, 1 month

Kaur Collection Inventory

by jnc＠mercury.lcs.mit.edu

> From: Ed Cross > I saw a mystery PDP-11 in the garage that I believe to be an 11/70. Yeah, I think so; someone has transplanted a few red/purple toggles into it (perhaps some of the original blues got broken), but it's a /70 front panel, which won't (without major kludging/surgery) work on any other model. Without pictures of the insides of the main pull-out bay, and any others (there should be at least one, for the main memory) it's impossible to say how complete a system it is; -11/70 CPU boards are easy to find, though. > please help identify what I took pictures of. A couple of things I hoticed quickly: 2349 shows a PR05 high-speed paper tape reader (like the PC05, but reader-only), and 2325 a CR11 card reader (a Documation unit re-badged by DEC). My impression from looking at it all is that it's a huge pile of stuff, and some is probably just junk that should go to the scrappers. Their process, with the lawyer, is probably too top-heavy for a lot of the smaller items (e.g. 2387 shows a partial PDP-11 front panel which might be of some interest - e.g. I'd buy it if it showed up on eBait). Perhaps some one/group who is local can take everything that's left, after the main items (e.g. the VAX 750 - those are rare, I'm sure someone will scoop that up) are picked out, as a cheap lot, and sort out the good bits and put them up on eBait, and scrap the crap. > I hope this is useful to folks. Yes, very; thanks very much for putting in the effort. Noel

7 years, 1 month

Kaur collection inventory

by athornton＠gmail.com

7 years, 1 month

Kaur Collection Inventory

by athornton＠gmail.com

Last Saturday I went out to the location where the collection mentioned by Kristina Kaur resides, to take photos, create an inventory to the best of my abilities, and help her solicit proposals for the various items. I?m going to lead off with one of my last sentences in this email: PLEASE DO NOT WRITE KRISTINA, OR ME, DIRECTLY WITH YOUR OFFERS. Use the contact form in the Google Drive folder (see below) I?m pointing to and send your proposal to laura at rubinbernsteinlaw.com <mailto:laura at rubinbernsteinlaw.com> . I have no power over the disposition of any of this?I am just the chronicler?and Kristina wants to route all proposals for acquiring these things through the family's lawyer. The basic background is this: all of this stuff belongs to a man who has run a bulk-mailing business for many years, and who wrote a bunch of his own software for PDP-11 machines to do that bulk mailing. He has continued to use the PDP-11s until, apparently, quite recently. He also, unfortunately, has recently had a stroke, and although he is expected to recover, he is not going to be able to continue running the business, and particularly not from these machines. So his daughter, Kristina, has decided to make the collection available to people who will do right by it (preferably in a public museum), rather than just send it to the scrapper, which is awfully nice of her. I want to express my gratitude to Kristina for allowing me to go out there and root through the collection, and to Ruthann, who provided good company during the digging and invaluable service during the search. There are three locations for all these items. Computing equipment is either in a climate-controlled garage, and apparently has been running until quite recently, or it is in a warehouse, which I do not believe to be climate-controlled but is walled and roofed and kept dark, which are all good things in Tucson. All the manuals were on a bookshelf in the home office, and were kept climate-controlled and relatively dust-free. The manuals are in excellent shape considering their age, with no environmental damage, although some of them are clearly worn from use. Let me get a couple things out of the way first: it was rumored there was an 11/40 here. I didn?t see one, but I saw a mystery PDP-11 in the garage that I believe to be an 11/70. As near as I can tell, there are two PDP-11 systems in the garage (the mystery 70 and an 11/45), which I believe to be in running or near-to-it shape. There?s also a *lot* of stuff out in the warehouse, much of it apparently bought from the University of Arizona at auction over the years, largely shrinkwrapped (sometimes to pallets, sometimes not) or stored in plastic bags. My guess would be that the things in the garage were in general never used after their acquisition, although some may well have been migrated out there after their useful lifespan was over. This is a GUESS. I have no idea of the condition of any of it, or what was cannibalized as spares for other things; I can say that, in general, it?s been stored out of the weather and doesn?t seem to be water damaged or (for Tucson anyway) very dusty. I (and the Kaur family, and everyone) make NO GUARANTEE AT ALL of the condition of any of this. Everything here is sold WHERE IT IS and AS IT IS and it may or may not work or be restorable. It is YOUR responsibility to pick it up, and if it can?t reasonably be restored, tough luck. We don?t know, and the one man in the world who DID know is not in any condition at the moment to tell us. As you might expect from a bulk-mailing business, this collection is super-heavy on printers and various paper-handling devices, as well as tape drives. These are things I know almost nothing about: I have mostly collected 8-bit micros and videogame systems, and only recently have started acquiring and restoring DEC equipment. There may well be pictures of things Kristina doesn?t want to include as part of this lot?all the more modern printers and paper-handling stuff is destined for people in the printing-and-mailing world in Tucson. But there?s an awful lot of stuff here where ?uh, it looks like a lineprinter to me, and maybe you connect it to a PDP-11?? or ?that?s probably a disk drive?? or ?it?s a controller for _something_.? So among the things I?m asking you to do is to please help identify what I took pictures of. I?ll call out the things I find particularly interesting and baffling. I have already offered first pick of the manuals to Al Kossow and bitsavers.org, the Living Computer Museum and Labs, and Jason Scott at the Internet Archives, since that is likelier to get them scanned and preserved than if they just vanish into people?s private collections. The LCML has indicated interest, and I have not heard back yet from the other two. If there?s something from the manual collection you particularly want, and one of those three also wants it, you will probably have to work it out with them. Most of the manuals seem to be for fairly major software, which I suspect (but have not looked to check) that bitsavers already has a copy of. Kristina asks that you please put together a proposal for what you would like from the collection BY MAY 31, and please use the form on ?Equipment Proposal v2.docx? (https://drive.google.com/open?id=1oJFVg8MsTie3e3fpdzmfoWmIuQo96aQP <https://drive.google.com/open?id=1oJFVg8MsTie3e3fpdzmfoWmIuQo96aQP>) to do that. She and her family?s lawyers will evaluate the various received proposals and she will decide on a division of items. The pictures I took?and many of them are terrible. In many cases I don?t know what I was looking at, and in other cases, the items were not in convenient spots to photograph; sometimes both. All are in the folder at https://drive.google.com/open?id=1kECm7hiYComNDTrLEwPPKIdIZ3MqKJ6y <https://drive.google.com/open?id=1kECm7hiYComNDTrLEwPPKIdIZ3MqKJ6y> . My inventory of these things is in CSV form at https://drive.google.com/open?id=1Xv5aYu9tE3BUYZOicgJTTJhrDhy2ci89 <https://drive.google.com/open?id=1Xv5aYu9tE3BUYZOicgJTTJhrDhy2ci89> and in slightly-better-looking Numbers (a Mac spreadsheet) form at https://drive.google.com/open?id=15i1hEKjB108cq4g4B7c7gNpn-HDbgRIi <https://drive.google.com/open?id=15i1hEKjB108cq4g4B7c7gNpn-HDbgRIi> . I make no representation as to its accuracy?it?s just the best I could do in the time I had available. For most of the items, there is both a line number (some numbers are missing: this is intentional. They correspond to which spreadsheet line it is, and there are some blank ones) and a reference to the picture of said item, which is the filename (i.e. ?IMG_2xxx.JPG?) in the folder. I didn?t bother to do image IDs for the manuals?they are mostly in order, and I figure everyone can read, so matching the title to the image is generally straightforward. A few notes about the items. It looks to me?and I could be wrong?that there are two PDP-11 systems in the garage. One is obviously an 11/45, and judging from the structure of the panel, the other is some kind of 11/70, but I?ve never seen a front panel quite like this: https://drive.google.com/open?id=15i1hEKjB108cq4g4B7c7gNpn-HDbgRIi <https://drive.google.com/open?id=15i1hEKjB108cq4g4B7c7gNpn-HDbgRIi> . Based on the fact that there are two Datasystem 570s out in the warehouse, I suspect it?s a Datasystem with a Frankensteined front panel, but I don?t know. I think that basically it?s two two-cabinet systems, each with a CPU and a disk in one cabinet and a tape drive in the other cabinet, but again, I?m not sure. I have no idea whether the pair of Datasystem 570s in the warehouse are intact or not. There are also three VAXes out there, one 11/750 and two 11/730s. One of the 11/730s clearly has an attached RL02, but I don?t know about the other two. Most of the stuff out there, generally, looks like it?s in good shape in the sense that it was put in the warehouse, often in shrink-wrap, and not exposed to light or weather for a long time. Sometimes a very long time. I am quite curious about what the Sun Microsystems item (https://drive.google.com/open?id=1ZLpoP6ZoHfs3_dvdOFkv9uy68X29OSjV <https://drive.google.com/open?id=1ZLpoP6ZoHfs3_dvdOFkv9uy68X29OSjV>) is?I couldn?t really get to it, and it?s about the right size and shape for a 3/160, but it could also easily be something like a tape drive that Sun OEMed. It has a plate on it identifying it as part of an ?IRAF? system, and what I know about IRAF is that it?s astronomical software (I am helping design something that the LSST project hopes is a ubiquitous successor to it, sort of), and so I kinda suspect this came out of the astronomy department or Steward Observatory at UA. There are no pictures of the 13-or-so Decwriters in the warehouse: they?re on a shelf about 10 feet up and you?re going to need either a forklift to get them down, or be extraordinarily brave. The ADM-3A (well, I think. It?s obviously an ADM terminal, and these match my mental image of 3As, but I could be wrong about the model) was obviously the terminal of choice here and there are a dozen or so. Sorry about that, VT-xxx fans. Again: PLEASE DO NOT WRITE KRISTINA OR ME directly with your offers. Use the contact form and send your proposal to laura at rubinbernsteinlaw.com <mailto:laura at rubinbernsteinlaw.com> . I hope this is useful to folks. Adam Please find the ?Description? column of the items here below; the spreadsheet is available from the link above. PDP-11/70? CDC 9766 #1 CDC 9766 #2 Disks for same system? System Industries 9400 Controller PDP-11/45 Kennedy 9401 Tape Drive Mystery printer Lineprinter #1 Zoom Modem Another System Industries 9400 Controller Lineprinter #2 ADM/3A(?) #1 ADM/3A #2 ADM/3A #3 ADM/3A #4 Hitachi V-1050F Oscilloscope PDP Datasystem 570 (11/70) #1 PDP Datasystem 570 (11/70) #2 Vax 11/730 w/RL02 disk Pertech Tape drive #1 Pertec Tape Drive #2 Vax 11/750(?) Dec Magtape TE16 9-channel Vax 11/730 RM-80 DEC Disk Drive Cipher Systems disk drive (?) CDC disk drives (?) Kennedy 9400 controller ADM/3A #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 (? +?) Lineprinter Prime 300 MB disk drive #1 Prime 300 MB disk drive #1 PDP-11 panel piece Tektronix 502 Dual-Beam Oscilloscope Sun Microsystems ??? IBM 029 Punch Lineprinter Yet Another Lineprinter Cabinet full of University Of Arizona Punchcards Acoustic-coupled modem Decwriter #1 Decwriter #2 Decwriter #3 Decwriter #4 Decwriter #5 Decwriter #6 Decwriter #7 Decwriter #8 Decwriter #9 Decwriter #10 Decwriter #11 Decwriter #12 Decwriter #13 (?+?) ODT-11R Debugging Program, PIP File Utility Package, Link-11 Linker and Libr-11 Librarian PDP-11 Filedump Utility Program PDP-11 Disk Operating System Monitor Programmer's Handbook MACRO-11 Manual PDP-11 TECO User's Guide (binder) BATCH-11 User's Guide PDP-11 FORTRAN IV Compiler and Object Time System Programmer's Manual (binder) PDP-11 Programming Fundamentals VT-100 Technical Manual VT-100 User Guide WS200 Series Word Processing Computer System CSS Products KMD11-C Multipline DDCMP Multiplexer Digital Standard MUMPS DSM-11 Technical Summary Something New Is Sweeping The World Of Educational Computing PDP-11 TECO User's Guide VAX-11/750 marketing slick MA780 Multiport memory marketing DEC Datasystem 500 Indent Guide FMS-11 Forms Management System Datatrieve-11 DIGITAL Software Product Description Jan 1986 MUX200/VAX PDP-11 RSTS v7.0 Release Notes RT-11 Programmer's Reference Manual RT-11 Software Support Manual FORTRAN IV Enhanced Character Graphics Programmable Data Processor Yesterday and Today BATCH-11/DOS-11 PDP-11 FORTRAN IV Compiler Technical Specification PDP-11 Device Driver Package for Monitor Version v008A October 1972 Computer Engineering: A DEC view of Hardware Systems Design PDP-11 RSTS/E v7.0 Release Notes for the RM05 RSTS/E v7.0 Documentation Directory FORTRAN IV-Plus User's Guide PDP-11 FORTRAN-IV Compiler and Object Time System Programmer's Manual PDP-11 Disk Operating System Monitor User's Manual DOS/BATCH FORTRAN Compiler and Object Time System PDP-11 BATCH user's guide Introducing the PDP-11/44 EDIT manual RSTS/E Text Editor Manual another PDP-11 FORTRAN-IV Compiler and Object Time System Programmer's Manual RSTS-11 System Manager's Guide DOS/BATCH Debugging Program (ODT-11R) Programmer's Manual PDP-11 Software Price List March 1973 DEC Newsflash BASIC-11 Language Reference Manual RT-11 Manual 1975 Special Decus Issue Technical Documentation PDP Systems and Options Catalog 1989 Jan-June BATCH-11/DOS-11 Assembler (MACRO-11) A General Purpose System for Interfacing a PDP-8 Computer to Pulse Counting Experiment (DECUSCOPE) Introduction to RSX-11M RSX-11D Guide to Writing a Device Handler Task VAX Software Handbook VAX11 Architecture Handbook VAX11/780 Hardware Handbook RSTS/E RUNOFF User's Guide Wespercorp DEC TM11-Compatible Tape Controller Diagnostic Manual Wespercorp Model TC-131 Tape Controller Hardware Manual Wespercorp Model TC-131 Tape Controller Logic Manual BATCH-11/DOS-11 Debugging Program (ODT-11R) PDP-11 BASIC Programming Manual (Single User, Paper Tape Software) PDP-11 PAL-11S Assembler and LINK-11S Linker Programmer's Manual PDP-11 Edit-11 Text Editor Programmer's Manual PDP-11 FORTRAN Language Reference Manual PDP-11 FORTRAN Language Reference Manual (#2) BATCH-11/DOS-11 Edit-11 Text Editor Programmer's Manual DOS/BATCH Text Editor (EDIT-11) Programmer's Manual RSTS/E Text Editor Manual another RSTS/E RUNOFF User's Guide RSTS-11 System User's Guide RSTS-11 System User's Guide Addendum RSTS Version 4B RSTS/E Version 5C (February 1975) Computer Programs For Automatic Countouring (McIntyre et al) FORTRAN IV Computer Program For Fitting Conserved Count Data?.(Ondrick & Griffith) FORTRAN IV CDC 6400 Computer Program to Analyze Subsurface Fold Geometry (Whitten)

7 years, 1 month

TeleVideo 1603 goodies

by pat＠vax11.net

I got some high resolution pictures posted of an early rev main board for the system, plus the front/back of unpopulated memory expansion and graphics boards for the system. Maybe someone else out there could find a use for that PCB artwork :) https://drive.google.com/open?id=1ILZ2UgwtfmoAtBMIYYIjaW4h5fKEPUYA Pat

7 years, 1 month

Event Announcement: DEC Legacy is back on 9th-10th Nov 2019, Windermere UK

by mark＠wickensonline.co.uk

DEC Legacy 2019 is on! The next DEC Legacy will take place Saturday 9th November 2019 - Sunday 10th at the Marchesi Centre in Windermere, North West UK. With a focus on Digital Equipment Corporation and their legacy of hardware, software and ethos I'm also extending an open invitation to those who are interested in SGI, HP, Sun, IBM and other high end hardware to come along and share their passion with us. Several formal presentations will be mixed with plenty of hands on time with hardware brought by enthusiasts. Enthusiasts are encouraged to bring along hardware and software to exhibit. The personal nature of the event brings a unique atmosphere within which friendships are easily forged. Registration is now open. Please visit http://wickensonline.co.uk/declegacy/ for more details. Regards, Mark Wickens, M0NOM

7 years, 1 month

Plessey disk drawing sets

by aek＠bitsavers.org

did anyone happen to get any of these? https://www.ebay.com/itm/VINTAGE-1979-PLESSEY-PERIPHERAL-SYSTEMS-MAINTENANC… they are different from the first set that I got for him, forgot about the auction, tried email and they say they are no longer available.

7 years, 1 month

OT: Gaming Gear

by cclist＠sydex.com

Okay, Newegg dropped a deal on a Seagate 25B "Gaming" SSHD. Exactly what does that mean? --CHuck

7 years, 1 month

"industrial" PDP-11

by jnc＠mercury.lcs.mit.edu

> From: Paul Anderson >> although the /35 was _usually_ supplied in a BA11-D 10-1/2" box > I'm pretty sure the 11/35 came in a F box too. That would be why I said "usually"! :-) Noel

7 years, 1 month

DG One owners? I think I have something.

by shadoooo＠gmail.com

Hello, I have two DG One, they are however not identical. One is the older version, the other is more recent and have a different display. I never heard of a keypad accessory, it would be a very nice piece indeed! I should check for connectors on the back? Thanks Andrea

7 years, 1 month

"industrial" PDP-11

by jnc＠mercury.lcs.mit.edu

> although the /35 was _usually_ supplied in a BA11-D 10-1/2" box Oh, that should be 'early units in the BA11-D; later ones used the BA11-K'. Noel

7 years, 1 month

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb