I am in need of a set of rack mount rails for my pdp 11/34. I have a second
Cpu chassis that has been tying
up my desk since i picked it up. If anyone has these for sale or knows of
modern rails that will work i am interested. I do not expect modern rails
to do the flippy bit to work on the bottom of the machine, but it would be
a short term solution that will free up my desk.
I understand that, but isn't there something type of licensing built into the ssp software which is paired to a specific ssp?
Sent from my T-Mobile 4G LTE Device
-------- Original message --------
From: Jonathan Katz <jon at jonworld.com>
Date: 6/4/2016 2:15 PM (GMT-05:00)
To: "General Discussion: On-Topic Posts" <cctech at classiccmp.org>
Subject: Re: E10K?
On Sat, Jun 4, 2016 at 4:31 AM,? <alexmcwhirter at triadic.us> wrote:
> but all the units i ever come across are missing SSP's. Pretty much my only
> requirement is a working SSP, the rest i can sort through.
Unlike the CS6400, the SSP can be any Sparc system with the packages
installed. The control boards for the E10Ks went over ethernet (JTAG
over ethernet in some cases.) Sun sold systems with everything from
Sparc 5s to Ultra 5s and Ultra10s as SSPs.
Hi
First thanks to all for considerable assistance.
I can now talk to the RX 211 on the Unibus.
First it did need the NPR jumper removing.
Secondly I made the system into an 11/84
(Processor in slot 1 nothing in 2 MSV11-J in 3 )
Finally I'm so used to hex modules in Unibus and the RX 211 is a quad.
Of course it needs to go in CDEF.
Switch on finds PMI memory ok counts up to 9 as normal.
Asks for choice. Type in B DY0 and we get a nice error message with lots
of parameters.
Time to become a 94 again.
Bonus: The other 94 chassis can become a 84 I have enough parts.
Rod
Just checking around if anyone has an E10K (or knows someone) that they
aren't all that fond of. I've been looking for one for the past year or
so but all the units i ever come across are missing SSP's. Pretty much
my only requirement is a working SSP, the rest i can sort through.
Thanks,
Alex McWhirter
For people in the Bay Area
Ian Finder had mentioned a couple of weeks ago that Weird Stuff had gotten in some
MIPS systems. They put them out on the floor for $75 ea, so I got a RC3020, Magnum 3000
and Magnum 3000/33. Some had a full compliment of memory, some had some scsi disks in
them. Hopefully they'll haven't been wiped, since one machine had a MIPS asset tag.
There are still about 10 of them, mostly RS and RC 2030s
Curious thing is all of the machines, even the RC2030 have PS/2 connectors for the kb.
Hi,
I tried to run the diskless controller test on my PDP8/A. It fails before
any tests has been executed. I suspect that my RL8A controller is broken.
The CPU tests and the memory tests works fine.
The test stopped @ address 5713 (display shows 5714), MD buff = 7402, AC = 0
Does anybody have the source code to this test? Earlier someone got the
test instructions photographed from microfishie.
The complete story is that the machine worked just fine, booted OS/8. Then
I changed the CPU from KK8A -> KK8E. The KK8E had some problems, but works
fine now. But now the machine doesn't boot OS/8 with any of the CPU's. The
diskless controller test stops at the same location with any CPU.
/Anders
> From: Rod Smallwood
> You could if you were able to get into ODT. I have yet to discover how
> you get there.
What happens when you move the "Halt/Run/Restart" switch on the front console
to "Halt"? (Note that the "Off/Enable/Secure/Standby" switch must be in the
"Enable" position for the H/R/R switch to be active.) That should put the
CPU in ODT.
Noel
I have some rather rough set of MINC boards - A/D, D/A, digital, and
clock. These were outside for some time in California. Not super
rusty, but weather worn. I think you could clean them up.
Trade for? I could use some R, S, and B modules. Other interesting stuff?
--
Will
Anyone have a spare 2x20 (40 pin) DIP header they can stick in an envelope?
I'm checking eBay and all I see are 10-packs and/or silly shipping.
I believe this is the standard board-mount IDE connector? Either gold or
bright tin plating are fine.
Happy to reimburse you for the cost of the part & 1st Class stamp! ;-)
