test-drb

test-drb@ccmp.vtda.org

101090 discussions

by Flash688＠flying-disk.com

Tony Duell <ard.p850ug1 at gmail.com> wrote: > > until the 8085 CFE loaded the microcode. > > Loaded from a TU58 cartridge, which is the main reason my 11/730 is not > running at the moment. The hardware is fine, I've rebuilt the drive rollers, > but as yet don't have a readable tape (not even blank, to write the > microcode onto). I'm pretty sure that I have a complete set of 11/730 TU58 tapes in my storage unit. I might even have some brand new tapes. If I can find them, I would be happy to send them to you. They have been sitting in storage for probably 20 years, so there are no guarantee that they are readable. I'm cleaning out the storage unit right now, in preparation for moving, so I'll keep an eye out for them. Alan "Pack rat" Frisbie

8 years, 2 months

Logic Analyzer software for the HP-IB/RS-232 bus pre-processor HP 10342B

by marc.verdiell＠gmail.com

This has probably been asked before, but does anyone have the software package that came with the HP-IB/RS232 HP10342 bus pre-processor for the HP1650 series Logic Analyzer (actually I have a 1670G)? It should have a config file and an inverse assembler file. I'm interested in the HP-IB files. Can't find it anywhere. - Marc

8 years, 2 months

M68020-PGA to M68EC020-PGA

by carlojpisani＠gmail.com

hi I am playing with an old Motorola board and I have a problem As you well know, the 68020 is a 32-bit microprocessor from Motorola, released in 1984. Motorola also manufactured MC68EC020 - embedded version of the MC68020 CPU, housed in different packages than the Motorola 68020 microprocessor, but even in the case of PGA package of 114-pin PGA, MC68020/PGA is not pin-to-pin compatible with M68EC020/PGA They both use 114-pin PGA package, but some pins are different, (Vcc and gnd are placed differenly in the pinout), and you need an adapter! My board's socket is designed for M68EC020, but I need to use a M68020 chip because only the goldcap version, i.e. MC68020RC33 114-pin ceramic PGA, is available at 33Mhz. Code: Select allCPU: MC68020 114-pin PGA ----[adapter] ---> socket: MC68EC020 114-pin PGA Do you happen to know *where* I can find an adaptor M68020-PGA to M68EC020 PGA? Do you happen to have for sale? here I am Thanks!

8 years, 2 months

Fairchild 9440/445 MicroFlame?

by bob＠jfcl.com

I'm looking for manual scans, software, really any documentation of any kind for the Fairchild F9440 or 9445 (aka the MicroFlame) microprocessors. Yes, bitsavers and a few other places have datasheets for the chips, but that's really about all the documentation I've found. And yes, I know that they're Nova clones and can run DG software, but Fairchild had their own development tools too that seem to have disappeared completely. In particular, Fairchild had a single board computer for the 9445 called (I think) the PEP-45. It had a built in EPROM monitor called PEPBUG-45. I'd love to find manuals and schematics for that gizmo. Actually I'd be interested in documentation for any systems that used either of the 944x chips. Bob

8 years, 2 months

Wonderland

by carlojpisani＠gmail.com

http://downthebunker.chickenkiller.com DownTheBunker is open! features: - bazaar distiller doesn't require to register an account, it sums up Market place's items for sale or wanted in a nutshell - person-to-person trading in the Bazaar, you have to register an account in order to contact people - mini message-wall; doesn't log the IP and doesn't require you to register, can be used as a message in the bottle, or a mini chat - message-board. doesn't request to register but it logs the IP. It's more advanced and it can be used as mini Wiki - Chunks (of users/stuff) offers FTP-like with manuals and links to other sites bookmarks Durcheinander is an advanced area with the possibility for the (local, only from the local intranet) user to upload and execute JavaScripts, JavaAplette, Node.Js code, and Java bytecode. It's not yet safe enough to be open to the public Internet, and it stills needs to be hardened in its profile. Due to what happened in December 2017, cyber attacks destroying the whole website, it's a reserved chunk of priv? stealth rooms for the team, whose access from the Internet is reserved and features are reduced e.g. it checks the socket.connect.ip, and if it comes from outside the intranet it blocks the whole scripting-engine allowing just a plain text browsing. My participation to SGI is merely focused on my needs, as I'd like to port an HDL simulator to Irix. But I sold my Octane 1 year ago, and I am willing to sell my dual Tezro rack-mountable racks cause I lost enthusiasm. Anyway, does anyone happen to have a copy of an Ada95 compiler for Irix? Or a working copy of GNAT? Needed for IRIX >= 6.5.27 I will for sure sell the Tezro, Maybe I will reconsider the purchase of a tiny Octane. I am more focused on Linux/HPPA and Linux/PPC32, which are used for job tasks. At the moment. I am developing a fast FiberChannel ram-disk for the radio telescope. cheers

8 years, 2 months

M6809E/63C09E databus behavior question

by brain＠jbrain.com

I agree this is very specific, but I thought perhaps someone could help. As I look at the '09 datasheets, I can't tell when the data lines become valid on a write cycle. I ask because I have created a few projects that place themselves between the CPU and the CPU socket (CPLD based). To play nice with a potentially shared address and databus, my code honors the BA and TSC lines on the IC.? If either line is high, as noted in the datasheet, I tristate the address and data lines. Otherwise, the address lines are valid during the entire E cycle. As for data, it depends on the state of the R/W line. If R/W is high, the external databus is connected to the CPU databus during the entire cycle if TSC and BA are both low. If R/W is low, I initially set the external data bus according to this assign statement: assign data_ext = (!r_w & e& !(tsc | ba) ? data_09 : 8'bz); The '09 boots, but certain devices fail to operate.? If I change the assign to: assign data_ext = (!r_w & (e | q) & !(tsc | ba) ? data_09 : 8'bz); or assign data_ext = (!r_w& !(tsc | ba) ? data_09 : 8'bz); The devices begin working. Either of the modified equations works, but I don't know if can safely place data on the external databus during the entire cycle, like the address lines, or if I need to be off the bus for some small portion of the cycle.? I was hoping the datasheets could help, but I am missing the key portion of the timing diagrams. I hope someone can enlighten me.? I have the system working, I just want to make it as good as possible. Jim -- Jim Brain brain at jbrain.com www.jbrain.com

8 years, 2 months

old DEC stuff

by sales＠elecplus.com

If they are still around, this guy had a lot of old DEC stuff. Not affiliated with seller, etc. Mitch Miller | Phone (937) 847-2300 / Fax (937) 847-2350 (Old area code was 513) | | Keyways, Inc. | 204 S. Third St. | Miamisburg, Ohio 45342 USA | | E-mail: miller at keyways.com | Web: http://www.keyways.com | Stock List: http://www.keyways.com/stock.html Cindy Croxton --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

8 years, 2 months

Manual for Data Media Elite 2500 terminal?

by bob＠jfcl.com

Can anyone point me to a technical manual for the DataMedia Elite 2500A terminal? I'm especially interested in documentation on the escape sequences and the special character sets. This was a fairly high end smart terminal from the late 70s or early 80s. Bitsavers has a short manual for the 1500 which I'm guessing to be similar, but the 2500 has some extra features (e.g. insert line/character, delete line/character, etc) that aren't present there. Thanks, Bob Armstrong

8 years, 2 months

No subject

by kevin_anderson_dbq＠yahoo.com

http://branch.annarobertsart.com Kevin Anderson

8 years, 2 months

old DEC stuff

by jnc＠mercury.lcs.mit.edu

> From: Dominique Carlier > I just regret this incredible rise in prices for collector machines > that, not so long ago, were languishing in wet sheds Hey, look at the bright side: as a result, they are much less likely to be simply recycled as scrap. I took great pleasure in telling one seller who'd pulled a board-set, and recycled the rest, that the part he'd recycled was worth a lot more than the part he'd saved. Hopefully that kind of news gets around. Noel

8 years, 2 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb