test-drb

test-drb@ccmp.vtda.org

101090 discussions

by steve＠tronola.com

> For anyone that cares, my vintage computer sites have moved: > My personal collection: >http://q7.neurotica.com/Oldtech/ > The AN/FSQ-7 on TV and in the Movies: >http://q7.neurotica.com/Q7/ > Please update your bookmarks. --- Very cool websites, Mike. Many thanks. Steve Lafferty

12 years

Vintage computer web site move

by mloewen＠cpumagic.scol.pa.us

For anyone that cares, my vintage computer sites have moved: My personal collection: http://q7.neurotica.com/Oldtech/ The AN/FSQ-7 on TV and in the Movies: http://q7.neurotica.com/Q7/ Please update your bookmarks. Mike Loewen mloewen at cpumagic.scol.pa.us Old Technology http://sturgeon.css.psu.edu/~mloewen/Oldtech/

12 years

5 Lear Siegler ADM-3/3A in Novato, CA (ebay)

by legalize＠xmission.com

Not affiliated with seller. 5 baby blue ADM-3/3A terms, local pickup only <http://www.ebay.com/itm/291197498815> It's a steal at $99 opening bid for the lot of 5. -- "The Direct3D Graphics Pipeline" free book <http://tinyurl.com/d3d-pipeline> The Computer Graphics Museum <http://ComputerGraphicsMuseum.org> The Terminals Wiki <http://terminals.classiccmp.org> Legalize Adulthood! (my blog) <http://LegalizeAdulthood.wordpress.com>

12 years

Tektronix VT220 compatible keyboard - information needed

by mark＠wickensonline.co.uk

I have a Tektronix VT220 compatible keyboard as pictured here: http://deskthority.net/resources/image/12676 Can anyone provide any information/links/technical specs? I suspect it is off either a character terminal or an X-terminal. If I can't find anything about the protocol the plan will be to replace the controller, an Intel p8049ah with an Arduino to do the row/column scanning. The keyboard was made by NMB and contains Hi-Tek 'space invader' key switches. The cable ends in a 6 pin mini-din connector. The pins of the cable are labelled as follows: 1. Clock 2. Data 3. N.C. 4. IG GND 5. +5V 6. CHASSIS GND I didn't think this would be PS/2 compatible, and it doesn't look like it as the signals don't tie up with a 6 pin MINI-DIN PS/2 pin out. Thanks! Mark.

12 years

Perkin-Elmer 68k Micro Model 7350

by pechter＠gmail.com

They also had a version of SystemV for them called MicroXelos System V. UniPlus did their System III. Perhaps the SysV as well. They also had idris available. They were standard Multibus chassis, IIRC,.b I had a 16 port version in a tower called an XF200 running a news feed for a while. There was a 16 port card... I found an old post on them. http://marc.info/?l=classiccmp&m=104957799225097&w=2 I had a crap pile of them at one time. Dumped them all at Trenton Computer Festival's dumpster and my trash cans in Lakewood since no one wanted them. The MFM drives were fairly slow and their screen handling was lousy. They did emulate a Perkin-Elmer 1251 terminal IIRC on their screen with full blockmode. Sorry about the top post... pulled these both out of gmail and attempted to reformat and quote. I think they were a Perkin-Elmer product that was merged into the Interdata/Concurrent manufacturing. Perkin-Elmer eventually stopped paying for Concurrent to build them. One of the few computers made in New Jersey. It was in dhrystone outputs back in the day, * CCC 7350A 68000-8MHz UniSoft V.2 cc 821 875 Trident (3rd party maintenanve place) showed they had the XF200 power supply... 8-) Bill > Yes, these only have two serial ports on the back but they do have$ > blanks in the panel for two more. $ > > Now I'm hoping the drives weren't wiped (but they probably were considering $ > the defense contractor it came from.)$ > $ > Todd$ -- d|i|g|i|t|a|l had it THEN. Don't you wish you could still buy it now! pechter-at-gmail.com

12 years

PDP-11/34 available in Edmonton, Alberta

by andreww591＠gmail.com

My hackerspace (ENTS; http://ents.ca/) recently got a large donation of equipment and components from an automation company. Most of it was test equipment but there was also a PDP-11/34 with two RL01 drives. An LP11 and a DZ11 are also installed. Several RL cartridges are included, although some are RL02 cartridges, and one is a VMS 3.0 distribution cartridge. There are also a few boxes of documentation that we haven't gone through yet (although I'd be surprised if there were anything there that's not on Bitsavers). It draws a bit too much power for us to run it there, so we are looking to sell it. I am not quite sure what is a reasonable price is, but I'm thinking somewhere around $200-$300. However, we are open to offers. I just don't want to see it scrapped. The buyer would have to either pick it up or pay for shipping themselves. Labels of included RL cartridges: BC-M951G-BC (RSX-1M+ pregenned dist kit) (RL02) BC-V981E-BC (RSX-11M+ 2.1 MPU21E dist kit; has note saying it has errors) (RL02) AX-D820B-BC (BSC-11/IAS-RSX V2 bin) (RL01) AX-J624A-BC (KED/RSX 1.0 bin) (RL01) VAX/VMS 3.0 required (RL02) Northwest Digital Sales - CTOS - Version 4.0 RSX Demonstration Disk (RL01) (not quite sure what this is) "Scratch Disk" (RL01) "Editors" (RL01) one more disk may be in one of the drives since there is a spare cover, but I'm not sure Next time I go there I should really go through the documentation and see if there are cartridges in either of the drives.

12 years

Does Anyone Have the Source Code for PDP-8 Disassembler DCP16.BN?

by bobvines00＠gmail.com

Does anyone have the source code for the PDP-8 disassembler "dcp16.bn" or know where it can be found? One place where dcp16.bn can be found is at http://www.dbit.com/pub/pdp8/nickel/utils/dcp/os8/. John's "from" directory says that the files came from "DECTAPE/DT42" -- does that mean anything to anyone? Thanks, Bov

12 years

IBM 5150, 5160, AST, Compac, AT&T, Allen Bradley, Cuttler Hammer

by useddec＠gmail.com

5150 sys board 5160 64/256K old style sys board 5160 async com card The IBM boards are sealed in static bags and boxed. The boxes had a description but not an IBM number on them. These could be unused, possibly refurbed. I probably picked up everything on this page from a 3ed party maintenance company over 10 years ago as surplus inventory. Only a few boxes were open and what I did look at looked like new. I'm not an IBM person, but I can look for actual part numbers upon request although I might have to open the sealed bags. I have quantity mostly on the 64/256 board. I should have a qty of power supplies, PS2 and other parts here yet. AST Megaplus MG-064-P new in box AT&T Z3A Async Data unit new in box Compac async card boxes of nib Allen Bradley and Cutler Hammer parts Feel free to contact me off list if you are interested. Shipping from 61853. Thanks, Paul

12 years

microcode store (was Re: Looking to get into a Mini Computer...)

by spacewar＠gmail.com

On Thu, Jul 24, 2014 at 4:21 PM, Tony Duell <ard at p850ug1.demon.co.uk> wrote: > [1] The VAX11/730 also loads the CPU microcode at power-up, but from what > I rememebr, ther eare some hardware features that optimise it for the VAX > instruction set. While it is possible to give it a differnet instruciton > set, I think it wopuld be a lot less efficient. All of the microcoded processors DEC designed, whether they had loadable microcode or only ROM, had hardware that was substantially oriented toward the normal DEC macroinstruction set(s), and would have been very inefficient at implementing other instruction sets. The VAX-11/7xx series hardware was designed for efficient execution of both VAX and PDP-11 instruction sets, but the other machines were designed for a single instruction set only. Even the machines that officially supported user-written microcode (PDP-11/03, PDP-11/60, some VAXen) were generally unsuited to implementing entirely different instruction sets, and user-added instructions were expected to have similar structure to standard instructions. The Western Digital chip set used in the PDP-11/03 was used for at least two other instruction sets, the WD16 used by Alpha Micro, which was very similar to the PDP-11, and the Pascal Microengine, which executed UCSD p-System p-code. The latter was not a very efficient use of the microarchitecture, and consequently the Pascal Microengine was not much faster than the UCSD p-System running on the fastest general-purpose microprocessors available at its introduction. Since general-purpose microprocessors were evolving quickly, soon it was too slow to be taken seriously. Early on, it was very expensive to use fast RAM chips for a microcode store, so DEC used bipolar PROMs except on relatively high-priced machines (e.g., KL10 and KS10), and if serious bugs were found, the microcode PROMs had to be replaced. For the KS10, it was considered that the RAM chips used in the control store were unreliable, so they did parity checking on the control store, and if there was an error, the CPU would halt and the console processor would reload the control store. They patented that: http://www.google.co.in/patents/US4231089 The VAX-11/780 introduced the concept of patchable control store, where most of the control store was PROM but there was a small amount of patch RAM. Costs of high speed RAM declined quickly enough that most later non-microprocessor VAXen used entirely RAM control store. With the advent of VAX microprocessors, the larger die area required for RAM vs ROM shifted the economics shifted back to favor ROM with a small RAM patch area.

12 years

Fwd: Free Sun 3/470 (sun3x) stuff []Northern SF Bay area]

by toby＠telegraphics.com.au

Forwarding. This is very nice hardware, I hope someone can rescue it. --Toby -------- Original Message -------- Subject: Free Sun 3/470 (sun3x) stuff Date: Sat, 26 Jul 2014 09:17:00 -0700 (PDT) From: Jeremy Cooper <jeremy at baymoo.org> To: port-sun3 at netbsd.org, port-mvme68k at netbsd.org I have the parts to a full 3/470 "Pegasus" machine ready to give away or it will have to be recycled. I never got a chance to learn all the names of these pieces, nor their exact part numbers. They include: * A 12-slot desk-side 9U (three connector) VME chasis. It is not the original Sun chasis, it's a clone. * About five memory boards. * 3/470 "3400" main CPU board * A couple of SCSI boards * A color framebuffer board. There are a couple of interesting feature on this sun3x machine that never made it into NetBSD: the block copy accelerator and the page-zeroing accelerator. It would be great if some kind NetBSD developer could take this machine and use it to incorporate support for these devices into NetBSD/sun3x, but I will gladly give the machine, or parts, to anyone who asks. The machine is located in the Northern San Francisco Bay Area. I can drive the chasis around the Bay Area (but no further). The boards, which are perhaps more rare, still have their most recent shipping boxes and packaging. These I will ship to anywhere in the US or Canada for free. If you aren't interested in this hardware but know someone who might be, please forward this message to them. Thanks! -Jeremy

12 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb