test-drb December 2020

test-drb@ccmp.vtda.org

103 participants
82 discussions

Seeking: TMS32010 Assembly Language Programmer's Guide (1983)

by pbirkel＠gmail.com

All; I seek a copy (hard or electronic) of the "TMS32010 Assembly Language Programmer's Guide" (1983). Paperback : 194 pages ISBN-10 : 0904047423 ISBN-13 : 978-0904047424 Publisher : Texas Instruments (December 1, 1983) Item Weight : 1.11 pounds Language: : English The "TMS32010 User's Guide" (1985) is readily available. Not so the (more important!) Programmer's Guide :-{. I recently obtained a TMS 32010 Evaluation Module (EVM). So I'm motivated to "learn something" about the details of programming the TMS 32010. My first hands-on foray into the (early) world of DSP :-}. I've searched all of the nooks-n-crannies of the web to no avail. All help in locating/obtaining a copy of this document will be greatly appreciated. I do have a copy of "Digital Signal Processing Using TMS32010" (Douglas L. Jones) on order as a stop-gap measure. Thank you, paul

3 years, 11 months

Emails going to spam folder in gmail

by billdegnan＠gmail.com

Hi, I have noticed the same email addresses' messages routinely end up in the spam folder of gmail. It's no big deal for me to check my spam folder but it's an extra step and messages can be lost. For those of you who run your own mail servers please consider updating your DNS / authentication to match gmail standards. It's not about making a filter or marking messages as "not spam". It's about how the sending mail server communicates with gmail and the "newer" mail server gateway protocols, etc. so that it's not necessary to make a filter in the first place.' There are a lot of how-to's on the web, each mail server is different and there is no simple fix that applies to all. Bill

3 years, 11 months

Hey, I got a Perq_T2 image!!!

by cz＠alembic.crystel.com

Well, after waiting almost a month for the USPS to deliver a "Priority Mail 1 day" package from Dave I now have the MFM reader card. So I started working on these disks I rescued. First up was a ST506 (labelled "RD50" by DEC) and a pair of ST412's. Bad news: No drives spun up Good news: You can take the controller board off the drives and spin the spindles by hand. Better news: The spindles spun (clockwise, viewed from bottom) Best news: spinning while powering on got all three to spin up. So far I imaged the RD50 (possibly a Rainbow or a Pro/350) and one of the ST412's. It came up as a PERQ_T2 format and I have two dumps of the disk with only one bad sector reported. Anyone know what to do with this kind of image? I've powered down the drives and will store them till I can figure out how to make them run more quietly.... C

3 years, 11 months

Zerox System 60

by binarydinosaurs＠gmail.com

Hello folks, I?ll get the ?happy new year? in now because later on I?ll probably be in bed :) Does anyone remember the Zerox System 60? There?s an ebay listing for one and a friend of mine says the PC shop he worked for back in the 90s had a bunch of them but no info could be found then or now. https://www.ebay.co.uk/itm/Apple-II-with-extras-disk-drives-graphics-tablet… <https://www.ebay.co.uk/itm/Apple-II-with-extras-disk-drives-graphics-tablet…> Cheers, -- Adrian Graham Owner of Binary Dinosaurs, the UK's biggest private home computer collection? t: @binarydinosaurs f: facebook.com/binarydinosaurs w: www.binarydinosaurs.co.uk

3 years, 11 months

ISO: TI 980 (not 980A or 980B) Hardware docs

by derschjo＠gmail.com

Hey all -- A straight TI 980 (not one of the later 980A or 980B variants) appeared on my doorstep this afternoon. While well-shipped, the person I got it from decided to ship the boards and power supply separately from the chassis -- and unfortunately didn't document where anything goes. There is precious little information out there about the original 980 -- anyone sitting on any documentation? Anyone know someone who has one? (Anyone have any spare parts? The core memory boards & chassis are labeled well enough for me to see that I'm missing one of the "DA" boards...) Thanks, Josh

3 years, 11 months

PDP-8 memory card on eBay?

by jnc＠mercury.lcs.mit.edu

Anyone recognize this card: https://www.ebay.com/itm/313323417718 I looked, and it doesn't seem to be any of those for a PDP-11. However, I see the DRAM array is 12x4 chips, which makes me think it might be for a PDP-8? Noel

3 years, 11 months

Omnibook 300 error code

by tomas＠basun.net

Hi all, Does anybody here know what "8041 Error: did not respond to 0AAH command" might mean? (p. 70 in the HP OmniBook 300, 425, 430, 530 Service Manual) /Tomas

3 years, 11 months

Does anyone have an H11 and need a H27 card?

by Gary＠realtimecomp.com

Chris, I could use one. I have an h-11 system that has issues with the h-27 system. Please contact me off list. Gary Gary at realtimecomp.com -------- Original message -------- From: Chris Zach via cctalk <cctalk at classiccmp.org> Date: 12/27/20 4:42 PM (GMT-05:00) To: CCTalk mailing list <cctalk at classiccmp.org> Subject: Does anyone have an H11 and need a H27 card? I have one, and if someone needs to to complete their collection I'd rather it goes there. If you just want to put it on Ebay pls don't bother as I can do that but if you really need one let me know. CZ

3 years, 11 months

Does anyone have an H11 and need a H27 card?

by couryhouse＠aol.com

Did you need my address Chris?? Thanks Ed# On Sunday, December 27, 2020 ED SHARPE <couryhouse at aol.com> wrote: We have a heath h11 that could u se one at smecc museum.project...Chris.? Thanks ed drop ne a lune offlist... thanks....Ed# On Sunday, December 27, 2020 Gary L. Messick via cctalk <Gary at realtimecomp.com; cctalk at classiccmp.org> wrote: Chris, I could use one.? I have an h-11 system that has issues with the h-27 system. Please contact me off list. Gary Gary at realtimecomp.com -------- Original message -------- From: Chris Zach via cctalk <cctalk at classiccmp.org> Date: 12/27/20 4:42 PM (GMT-05:00) To: CCTalk mailing list <cctalk at classiccmp.org> Subject: Does anyone have an H11 and need a H27 card? I have one, and if someone needs to to complete their collection I'd rather it goes there. If you just want to put it on Ebay pls don't bother as I can do that but if you really need one let me know. CZ

3 years, 11 months

Does anyone have an H11 and need a H27 card? -spam

by couryhouse＠aol.com

All H- computers. Are welcome! Well.. we want to show the entire product line. We have a hero robot too. . All we need is the h89 and stuff to finish out the h89 drive subsystem? for h11 and make it work... this board is a game changer.. It would be nice?? to gave heath analog? computer also .... anyone recomend? any other adds we may have overlooked ?? Thanks Ed# On Monday, December 28, 2020 Bill Gunshannon via cctalk <bill.gunshannon at hotmail.com; cctalk at classiccmp.org> wrote: On 12/28/20 7:45 PM, ED SHARPE via cctalk wrote: > > I am trying to have cplete. H8 h11 and h89 tjus the need for the pardon I requested > While I have always wanted the H-11 and the H-8 I can honestly say I was never impressed or interested in the H-89. bill

3 years, 11 months

← Newer
1
2
3
4
5
6
7
8
9
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb December 2020