test-drb March 2017

test-drb@ccmp.vtda.org

188 participants
235 discussions

IBM S/32, PDP-11/60+RL01, PDP-11/34, East Lansing MI

by jnc＠mercury.lcs.mit.edu

> From: Dan Cohoe dancohoe at oxford.net > I'll put my hand up on this. It sounds like you got everything that was left? Enjoy the -11/60, they are pretty rare! Noel

9 years

PDP-11/60+RL01 Recovery (was: Re: IBM S/32, PDP-11/60+RL01, PDP-11/34, East Lansing MI)

by pbirkel＠gmail.com

-----Original Message----- From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Dan Cohoe via cctalk Sent: Friday, March 03, 2017 10:45 PM To: 'General Discussion: On-Topic and Off-Topic Posts' Subject: RE: IBM S/32, PDP-11/60+RL01, PDP-11/34, East Lansing MI -----Original Message----- From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Steven Maresca via cctalk Sent: Friday, March 03, 2017 11:59 AM To: Noel Chiappa; General Discussion: On-Topic and Off-Topic Posts Subject: Re: IBM S/32, PDP-11/60+RL01, PDP-11/34, East Lansing MI On Fri, Mar 3, 2017 at 11:48 AM, Noel Chiappa via cctalk < cctalk at classiccmp.org> wrote: > > Is anyone confirmed to be picking this stuff up? I'll put my hand up on this. ..... The 11/60 processor was stored in better conditions and consists of two BA11 style boxes. ..... Regards, Dan ----- Can you share with us the complement of modules installed in the two BA11-P? I'm curious as to how "stock" the configuration was. Thanks, paul

9 years

Clock program for COSMAC Elf microcomputer with PIXIE graphics

by spacewar＠gmail.com

I've written a clock program to run on an unexpanded Elf with PIXIE graphics. It proved to be quite a challenge to fit it into 256 bytes, but I've now got it working, with two bytes of RAM to spare. There are 12-hour and 24-hour versions. I've released it under the GPL 3.0 license. The source code is in a github repository: https://github.com/brouhaha/elf-clock A text file containing instructions and hexadecimal object code is at: https://github.com/brouhaha/elf-clock/releases/download/v0.1/elf-clock-v0.1…

9 years

Cekit 8085 micro trainer

by jules.richardson99＠gmail.com

I picked up a Cekit 8085 microprocessor trainer last weekend, model MT-01. Google seems to be of no help - has anyone else here got one of these? There's nothing really specific that I wanted to know, but it's just odd that there seems to be no info out there at all about it. Some of the writing on the PCBs is in Spanish, and it says on the back that it was made by Cekit for EKI - but throwing that into the Google pot doesn't appear to be of any help. I'm not even sure how old it is. The CPU, I/O chip and some of the logic is dated 1983/84, but then there are a handful of Goldstar 74LSxx ICs with 90xx codes on them. It may be that Goldstar just didn't follow date code conventions, or it's quite possible that it really is that recent (and some of the ICs just came from much older stock). cheers Jules

9 years

IBM S/32, PDP-11/60+RL01, PDP-11/34, East Lansing MI

by jnc＠mercury.lcs.mit.edu

> Is anyone confirmed to be picking this stuff up? I sent the person an email, never heard back. Ditto for one of the people here who said they'd sent the person an email - I sent them an email, asking if they'd heard back, never got an answer from them either. Noel

9 years

DEC VT30-H and VTV30-J, was VSV11

by ed＠groenenberg.net

Henk, Your 'XXXX' high speed lineprinter is most likely a Dataproducts Model 2230 (a.k.a Dec LP05). Regards, Ed -- Ik email, dus ik besta. BTC : 1Lk6141nvDKPxtCa5erfFyovsoJN2LKqNJ

9 years

IBM S/32, PDP-11/60+RL01, PDP-11/34, East Lansing MI

by ljw-cctech＠ljw.me.uk

Via Mike Ross, but contact Greg with any questions! ---------- Forwarded message ---------- From: "Greg Bebermeyer" <bebergee at gmail.com> Date: Feb 27, 2017 4:44 AM Subject: IBM System/32 - web response To: <mike at corestore.org> Cc: Hi Mike, Maybe this is no longer relevant since I can't tell from the web page how recent the post is... I am selling my house and in the back of the garage is a complete System/32 that was working when I stuck it there and covered it. Much other stuff is in front of it so I haven't seen it in a while. It's free for the taking to anyone willing to come to East Lansing, Michigan and pick it up. If you aren't interested then it'll just go to the scrappers because I need to get the place ready for inspection. The junk haulers should uncover it in a day or two at which point I could take pictures. I also have a PDP-11/60, if you know of anyone interested. Same deal - free, come pick it up. The 11/60 main box has been stored in a dry basement along with two RL01 disk drives (in free standing cabinets, not rack mounted) along with a box of flat interconnect cables. It was used in a cardiac unit to run heart monitors and has an extra card cage full of interface cards. Also there's 3 PDP-11/34s in a rack in the garage as well. All this stuff has to go in about a week to 10 days, unless arrangements/promises are made and kept. If you're interested in any of this stuff, or could refer me to someone who might be, I would love for this stuff to go to a good home. Yup, I started with FORTRAN and 80-column punch cards. Thanks. My best, -Greg Bebermeyer bebergee at gmail.com greg.bebermeyer at gmail.com -- Lawrence Wilkinson lawrence at ljw.me.uk The IBM 360/30 page http://www.ljw.me.uk/ibm360

9 years

Able board on eBay

by jnc＠mercury.lcs.mit.edu

> It's one part of a DMAX/16. Oooh, good catch. I hadn't looked carefully at those faint images, I was just looking at the brochure which had the separate images. > Not nearly as cool as an Enable :). Yes; the ENABLE was pretty clever: it used an MUD backplane as an EUB backplane, to hold the ENABLE and stock EUB memory cards; both the CPU _and_ DMA devices were on the incoming UNIBUS, and the ENABLE could tell whether a read-write cycle was from the CPU, or a DMA device (if you look at the UNIBUS spec, there's just enough to do that, even without being able to see NPG), and routed it through the appropriate mapping, depending. Noel

9 years

Able board on eBay

by jnc＠mercury.lcs.mit.edu

So there was an odd board from Able up on eBay: http://www.ebay.com/itm/311809552775 Anyone know what it was? From the Able product summary it looked a bit like an Interlink/U or perhaps an Enable - although the detailed chip layout didn't look like the illustrations of either. Anyone know? Also, speaking of the Able ENABLE, I've recently discovered more about it, and now understand pretty much how it works. Noel

9 years

DEC VT30-H and VTV30-J, was VSV11

by henk.gooijen＠hotmail.com

Oops, typo ? I missed one folder. The correct links are www.pdp-11.nl/peripherals/comm/interface/vsv11/vsv11-info.html<http://www.pdp-11.nl/peripherals/comm/interface/vsv11/vsv11-info.html> www.pdp-11.nl/peripherals/comm/interface/vt30h/vt30h-info.html<http://www.pdp-11.nl/peripherals/comm/interface/vt30h/vt30h-info.html> While ?promoting?, I also added a page for the RP03 www.pdp-11.nl/peripherals/disk/rp11-rp03/rp11-rp03.html<http://www.pdp-11.nl/peripherals/disk/rp11-rp03/rp11-rp03.html> It will be some time before pictures of the system and more info will land here. I am re-organizing my 2250 square feet ? but not yet clear how everything will be placed. Van: Paul Birkel<mailto:pbirkel at gmail.com> Verzonden: vrijdag 3 maart 2017 11:45 Aan: 'Henk Gooijen'<mailto:henk.gooijen at hotmail.com> Onderwerp: RE: DEC VT30-H and VTV30-J, was VSV11 Henk: In case you haven't noticed, neither of those URLs are yet active :-<. To Your Good Health! -----Original Message----- From: cctech [mailto:cctech-bounces at classiccmp.org] On Behalf Of Henk Gooijen via cctech Sent: Thursday, March 02, 2017 3:58 PM To: shadoooo; General Discussion: On-Topic Posts Subject: RE: DEC VT30-H and VTV30-J, was VSV11 Well, I did scribble a bit about the VT30 and VSV11 on my website . Check out www.pdp-11.nl/peripherals/comm/vsv11/vsv11-info.html<http://www.pdp-11.nl/peripherals/comm/vsv11/vsv11-info.html> www.pdp-11.nl/peripherals/comm/vt30h/vt30h-info.html<http://www.pdp-11.nl/peripherals/comm/vt30h/vt30h-info.html> Van: shadoooo via cctech<mailto:cctech at classiccmp.org> Verzonden: donderdag 2 maart 2017 19:12 Aan: cctech at classiccmp.org<mailto:cctech at classiccmp.org> Onderwerp: Re: DEC VT30-H and VTV30-J, was VSV11 Well, it would be a very nice thing to put the hands on a copy of such manual! :) Given that I didn't find ANY information on Google about these boards, except for the bare description in the PDP11 field guide, it would be very nice to archive a copy on bitsavers too... If you manage to find something, please let me know thanks Andrea >I've got a photocopied user's manual in this mess somewhere (used for the "VR:" VT30 emulation in E11).

9 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb March 2017