test-drb January 2017

test-drb@ccmp.vtda.org

198 participants
283 discussions

by ams＠gnu.org

Does anyone have close up pictures of the MIT CADR? Boards, the maintaince indicator display, anything interesting and close up. LM-2 and and Lambda would also be of curiosity.

7 years, 7 months

Microscope for Soldering and Inspection Work

by kspt.tor＠gmail.com

On 16 January 2017 at 00:51, Jon Elson <elson at pico-systems.com> wrote: > Also, flux smoke gets all over the lenses. That is one downside on my > Olympus, the bottom is not sealed. I made up some card stock and glued it > in place to try to prevent the smoke getting inside. But, it still gets on > the lenses requiring periodic cleaning. I use a fan and a flexible tube (for easy positioning) to suck the smoke away. It removes most of the smoke (from my nose as well).

7 years, 7 months

Microscope for Soldering and Inspection Work

by COURYHOUSE＠aol.com

OK! here goes...well the B and L stereo zoom has a screw in place over the optics underneath... it is for attaching close up lenses or reduction in power lenses etc. you can also screw in a clear cover. the cover will also screw in our the aux lens if my brain remembers right. Many other stereo microscopes also have this provision to add a clear filter or aux booster or de-creaser in power lens. always best to keep active optics covered with some protection to save from solder splash, sharp things sticking up from scratching etc etc... Ed# _www.smecc.org_ (http://www.smecc.org) In a message dated 1/14/2017 10:52:08 A.M. US Mountain Standard Time, cclist at sydex.com writes: On 01/14/2017 09:36 AM, COURYHOUSE at aol.com wrote: > Be sure your stereo-zoom has a cover thing screwed into the > front of it. always good to protect the active optics. > > We have a rework station with a sliding X Y table on it.... and a > scope mounted on it... but... my hands are not steady as when > young..( need to find technology to assist with that!) Ditto on the second paragraph. But I'm not sure what you mean by a "cover thing". Care to elaborate? Thanks, Chuck

7 years, 7 months

dual-wide dec extender cards

by aek＠bitsavers.org

fyi more common, but it has the correct depth connector on it thought I'd post since the description isn't at all obvious what it is http://www.ebay.com/itm/361530436227 http://www.ebay.com/itm/361530436651

7 years, 7 months

DEC G500 Module

by michael.99.thompson＠gmail.com

We are still fiddling with the TU56 drive on the PDP-12 at the RICM. We followed the head skew procedure, but it calls for a G500 module to amplify the signals from the tape head. We cobbled together a pair if G888 modules as the amplifier, and it worked OK. The G500 schematics are in the skew procedure so we could make one, but we don't know anything about the physical layout. Has anyone ever seen a DEC G500 module? -- Michael Thompson

7 years, 7 months

Need serial cabe for pdp 11/34 M7856

by lyokoboy0＠gmail.com

The cable that came with my 11/34 is for current loop, i need a cable that is wired for serial. If no one has the cable, i could make one myself, i just need the 40 pin connector that goes on the cable. I have been unable to find the connector. Oddly ebay appears to have the side of the connector that goes on the M7856 board itself, but i need the other end, that goes on the wire. Any help is much appreciated. Lots of setbacks with this thing. I just want to see it running already. --Devin

7 years, 7 months

What's the rarest or most unusual computer-related item do you own?

by jnc＠mercury.lcs.mit.edu

> From: Eric Smith > I have a computer of the type that Gates and Allen used for that early > development. :-) > I don't have it running, though. Really? Which model processor; KA, KI, KL? Noel PS: Apparently Gates and Allen at one point rented time on a commercial service in Boston to do development; anyone know who that was, and what machine/OS is was?

7 years, 7 months

Kenbaks in Nova Scotia

by vintagecomputer＠bettercomputing.net

-------- Original message -------- From: jos <jos.dreesen at greenmail.ch> Date: 2017-01-15 12:33 AM (GMT-08:00) To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org> Subject: Re: Kenbaks in Nova Scotia >?? And how a tiny museum in a tiny province could afford them.? Kind of a head scratcher! They were not always 30K+... I visited the museum &? talked to the (very friendly ) owner. ? While this museum in itself may not warrant a trip to Nova Scotia, the area is >well worth a visit. >Jos Cool. ?Unfortunately I'm way over on the other side of the country so it's unlikely I'll get there. ?I just wonder why the previous owner, who seems concerned with getting the Kenbak's story out to the world, elected to send so many to one rather isolated place. ?Interesting.

7 years, 7 months

EWD37

by pbirkel＠gmail.com

Priceless product review! (The infamous CADET, aka IBM 1620.) ROFL :->. http://www.cs.utexas.edu/users/EWD/transcriptions/EWD00xx/EWD37.html\ <http://www.cs.utexas.edu/users/EWD/transcriptions/EWD00xx/EWD37.html/> -----

7 years, 7 months

DG Nova extender board on eBay

by aek＠bitsavers.org

fyi www.ebay.com/itm/252724692683

7 years, 7 months

← Newer
1
...
13
14
15
16
17
18
19
...
29
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb January 2017