------------------------------
On Wed, Feb 13, 2013 10:40 PM PST Eric Smith wrote:
>I'm not sure when "then" was, but I think you've confused the company "eMachines" with the older UMAX/Supermac brand. eMachines was from their inception a PC clone company. Through acquisitions, eMachines was most recently an Acer brand, but has just been discontinued recently.
>
>Eric
Nuh uh. The original emachines at least sold mac cards. Check ebay. I still have my old Futura SX video card stuck in a IIcx.
E-majl your needs. I sold the drive cabinet like an idiot but the cpu w/1 busted key (and does not work), and the expansion cabinet w/a few digs I still have. I'll probably put this stuff on ebay soon. I can at least provide digital stills of the manuals though.
I've readily created and reproduced images of Tandy 2000 720k 5 1/4" floppies with run of the mill 1.2 Meg drives. All kinds.Imagedisk, Teledisk wotevuh. In early pentiums and whatnot. Didn't tamper with jumpers nor data rates. And I do seem to recall W2K server straitaway raeding quads in 1.2 drives. Again w/no tampering or fenagling anything. Not even a pretty please.
Don't listen to the Fredster. Quads are alive and well and are the de facto Uber Density.
------------------------------
On Thu, Feb 14, 2013 12:43 AM PST Sam O'nella wrote:
>Have you tried making any of those 5.25 to 8" converters with them?
Most of the drives I"ve seen have 50 pin male headers like a scsi-1 or something else entirely.
>-----Original Message-----
>From: Chris Tofu <rampaginggreenhulk at yahoo.com>
>Sender: cctalk-bounces at classiccmp.orgDate: Wed, 13 Feb 2013 16:58:42
>To: <cctalk at classiccmp.org>
>Reply-To: "General Discussion: On-Topic and Off-Topic Posts"
> <cctalk at classiccmp.org>
>Subject: Re: 3B2 floppies
>
>
>I also have a bag full of the card edge to header converters. 1$ + shipping.
>
Despite my illiteracy I was SIMPLY STATING that I've readily worked with quads w/o having to fiddle with anything.
What are we supposed to call them if not quads??? Clearly it's not about density when even I stated DD disks seem to always work. It's about a format that is unusual yet common enough to warrant a separate designation.
------------------------------
On Wed, Feb 13, 2013 3:49 PM PST Fred Cisin wrote:
>On Wed, 13 Feb 2013, C:\Derp wrote:
>> I've readily created and reproduced images of Tandy 2000 720k 5 1/4"
>> floppies with run of the mill 1.2 Meg drives. All kinds.Imagedisk,
>> Teledisk wotevuh. In early pentiums and whatnot. Didn't tamper with
>> jumpers nor data rates. And I do seem to recall W2K server straitaway
>> raeding quads in 1.2 drives. Again w/no tampering or fenagling anything.
>> Not even a pretty please.
>> Don't listen to the Fredster. Quads are alive and well and are the de
>> facto Uber Density.
>
>For those who are literate, I clearly stated that MOST "1.2M" drives can
>do "720K" formats, once the drive select and cabling issues of
>installation are done, and after somebody COMPETENT writes software that
>switches speed or data transfer rate to the correct values (which they
>will often DEFAULT to, and prevents software from double-stepping.
>Any problems that occur are installation issues, and/or the result of
>running software that does stuff that you do not want.
>
>However, calling them "quad" is a completely clear determination of
>incompetence.
>
>There are no "FREDSTER"s here.
>
>
------------------------------
On Wed, Feb 13, 2013 8:46 PM PST Toby Thain wrote:
>On 13/02/13 9:50 PM, Chris Tofu wrote:
>>
>> Do 128k Macs go for big bucks? Guess I've been out of the loop.
>>
>
>I heard they stopped making them.
O MY SIDE STOP STOP
I heard on good authority they ain't making twinkies no mo either. And then one turns up on this forum.
------------------------------
On Wed, Feb 13, 2013 10:27 PM PST Chuck Guzis wrote:
>On 02/13/2013 09:03 PM, Fred Cisin wrote:
>
>> "It works on a real IBM PC" carries no weight when a reviewer's machine
>> is buggy.
>
>Apparently, the Sanyo piece-of-something MBC-550 series machines are now collectors' items. One of the worst PC-compatibles/non-compatibles ever. Used a WD17xx floppy controller and ran (by CPU clock) slower than the 5150. Has a sort of VCR-look to it. No BIOS, except for a very simple bootloader--the BIOS had to be loaded from your boot floppy.
>
>One wonders what possessed Sanyo to make the thing.
>
>--Chuck
I thought you liked the Silver Fox. Yes it had a 3.58 mhz clock, a hybrid digital-linear power supply, one red key and the largest return key you'll ever need. My dookey machine don't work currently. It may look like a vcr because it's so compact. Warez are available on the Tandy 2000 yahoo group or at least there's a recent threadc telling you where to find them. They had a following back in the day. Had better color graphics then cga if you could imagine.
------------------------------
On Wed, Feb 13, 2013 10:00 PM PST Scott Quinn wrote:
>I AM UNWORTHY!
>
>I have recited the proper names of the D-shells 10 times through as penance. Scrub out That Which Shall Not Be Named Again and insert whatever descriptive term you prefer.
>
>Some marketer got to the manuals and put in That Which Shall Not Be Named Again, and the 3B2 is my first introduction to that particular format. I have been instructed in the mysteries and now know the proper terms to use.
I have heard on good authority that even the priests and priestesses, Fred, Chuck, Allison,... utter such blasphemies in secretive chambers. So just don't swet it. Everybody's doing it.