I payed 100$, and had to pick it up in Queens/Nassau. I'll take 50$ plus shipping, from 08758. It works, but
there is noticeable screen burn even when off. I have some disks, and
the 8" drive cabinet.
There are 5 HP 700/96 terminals with keyboards. The keyboards are complete.
1 of the terminals has significant screen burn in white mode, but not in
black mode.
4 terminals come up crisp and bright white, no screen burn, no scratched
glass.
Cases are very dirty right now, but I can clean them.
Make offer? Prefer to ship within the US; I don't know how well these will
do going overseas.
Cindy Croxton
Electronics Plus
1613 Water Street
Kerrville, TX 78028
(830)792-3400 phone (830)792-3404 fax
AOL IM elcpls
_____
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2742 / Virus Database: 2617/5875 - Release Date: 11/05/12
I'm still digging. I found more 550 stuff. I think this is everything
that came with the 550. Here's a chance for you 550 owner's to get the
whole set at one shot!
Original DS-DOS box and invoice.
Original Sanyo Easywriter ver 1.3 disk
Original Sanyo disk box with 550 dos ver 2.11 and BASIC 1.25, two
original Sanyo disk for InfoStar (set B disk 2 and 3 of 4; disks 1 and 4
are below), original Sanyo disk for DOS 1.25 and BASIC ver 1.1
Original Sanyo disk box with all three original disk of set A, WordStar
and CalcStar and a backup copy of DS-DOS.
Two card board dummy disks used to protect the floppy drives duing shipment.
Joe
>
>A few weeks ago we were talking about the Sanyo 550 series and someone
mentioned one of the alternates operating systems that supported 80 track
drives in the 550. I said that was DS-DOS by Michtron.
>
> Today I found an old Sanyo disk package with four disks for the 550. One
of them is DS DOS 2.11, one is InfoStar, one is MailMerge/SpellStar and the
other is a disk of misc utilities. The first three are original disks. In
additon, the InfoStar, MailMerge/SpellStar are Sanyo labeled disks that
came with the 550. If anyone wants them, trade me something I can use and
they're all your's.
>
> Joe
This was software me my parents used in the 1980s on
our family computer. Does anyone know how and where
to obtain this, for old time's sake?
Thanks in advance.
- MG
Does anyone have this, willing to sell or --- more ideally,
for me --- willing to trade a SGI IP59 quad-processor CPU/node-
board? (P/N: 030-1989-003)
I have several (non-SGI) systems of interest, Alphas (PWS 500au's
and DS10s), but also Sun SPARCs (e.g. Ultra 10) and also at least
one HP Integrity rx2620 "Montecito" (largely maxed out, with 24
Gbytes RAM) to trade. All of the above are max'ed out, in terms
of 'specs' & configurations, plus there are many (PCI, PCI-X,
AGP, etc.) options available. I also have an IP53 dual-processor
CPU/node-board, as a possible 'replacement' (in case an IP59 board
would have to be removed from a working system) and may even have
a quad-processor one (i.e. the one I currently have installed).
I'd also like to emphasize, to avoid confusion, that these are
things I have to offer. Not so much things I'd like (or deem
sensible) to trade 1:1. The reason I'm looking for this part,
as well as other parts, is because I'm trying to get as much
out of my system as possible, as I'm working on my portfolio
as a graphic designer.
Either way, please don't hesitate to contact me. I'm open to
ideas and offers. Thanks in advance.
- MG
Does anyone have a complete set of SGI DMediaPro DM2/DM3 LVDS
cables, willing to trade/sell? (See my other WTT/WTB thread,
for the IP59 board, for possible items of interest to trade.)
I'm specifically looking for both a white (P/N: 018-0985-001)
and black (P/N: 018-0946-001) LVDS cable, to connect a DM3 to
a VBOB.
Thanks in advance.
- MG
Does anyone have one of these TRAM (Texture Memory, 4 Mbytes
ideally, P/N: 030-0676-003) boards, for an SGI Indigo? IMPACT
(e.g. for HighIMPACT) graphics card to trade/sell? (See my
previous threads for possible items to trade.)
Thanks in advance.
- MG
Two Compaq AlphaServer DS10 systems, each with a 466 MHz EV6
processor and 2 Gbytes RAM (I can also reduce it to, say, 256
Mbytes). There are various options additionally, including SCSI
RAID (e.g. Smart Array 5300 or even Smart Array 6400), GbE
(DEGXA, original and/or modified), stock ELSA GLoria Synergy,
various Radeon 7500 (also All-In-Wonder), NEC USB, audio cards
and more. One of the two DS10s 'as-is', as it may have a faulty
CD-ROM drive (it's also missing its 'badge/name plate' with
"ALPHASERVER DS10" on it, below the "Compaq" logo, in case you
should care). The skins are all intact, in good/excellent shape
and included.
I have various options to offer. In any event, please contact
me for more information, offers or potential trades (I'm in
particular looking for SGI parts). I can also show pictures
and arrange a 'test drive' or 'tour' via SSH or Telnet.
The systems are located in the Netherlands and I'm willing
to ship (internationally).
- MG
Anyone interested in a barely used, mint-condition, HP AlphaServer
DS15? Equipped with a 1 GHz 21264C/EV68CB, maxed out with 4 Gbytes
RAM, (*original HP*, active-cooled, noise-free) ATi Radeon 7500,
(rare) DS15 audio option, DEGX2 (dual-port Gigabit Ethernet) and a
hot-swap front access disk cage (I may also be able to include two
disks and sleds, contact me about that). A nice touch, especially
for those used to the DS10, is that SCSI (KZPEA) is on-board.
Besides the on-board KZPEA, I also have a KZPDC (HP/Compaq Smart
Array 5300, Ultra160 SCSI RAID HBA) and/or KZPEC (HP Smart Array
6400, Ultra320 SCSI RAID HBA), as well as an HP/Neterion XFrame
10GbE NIC.
Here are some pictures:
- <http://marcogb.home.xs4all.nl/tmp/pictures/02.jpg>
- <http://marcogb.home.xs4all.nl/tmp/pictures/03.jpg>
- <http://marcogb.home.xs4all.nl/tmp/pictures/05.jpg>
Feel free to e-mail me offers.
- MG
Two Hewlett-Packard Integrity rx2620 systems, with dual 9015
"Montecito" (IA-64 with hyperthreading, VT-x, etc.) dual-core
processors, 24 Gbytes RAM, iLO/MP board and plenty of options
(Ultra320 SCSI RAID, 10GbE, GbE-and-FC combo cards and much
more). I should note, the processors have been installed last
year, brand-new out of the box! (In fact, I can even deliver
the original CPU boxes, with processor tools, included documents
and so forth.) This type of CPU supports HPVM (also known as
Integrity VM), which is a fairly recent feature.
In any event, please contact me for more information, offers
or potential trades (I'm in particular looking for SGI parts).
I can also show pictures and arrange a 'test drive' or 'tour'
via SSH or Telnet.
The systems are located in the Netherlands and I'm willing
to ship (internationally).
- MG