> Eric writes:
>> Issue #3 is unfortunately the final issue.
>> You can now get PDF files of issues 1 through 3 from their web site:
>> http://www.300baudmagazine.com/
>
> And I never knew it existed until now :-(.
>
> The enthusiastic attitude and WIDE pop-culture-artifact orientation
> reminds me a lot of CHAC newsletters (did they/Kip Crosby do anything
> past the mid-90's?)
>
> Tim.
Ahhhhh, it doesn't remind you of my little publication at all?
http://www.classiccomputing.com/hb.html
Kip's web page stopped updating around 1997 and I haven't spoken with him in detail about what happened. I'm trying to get an interview going with him. He went on to co-author a book about Windows 98 and I don't know after that - http://www.amazon.com/Windows-1998-Bible-Frederic-Davis/dp/0201696908/ref=s…
Best,
David Greelish, Computer Historian
Classic Computing
The Home of Computer History Nostalgia
http://www.classiccomputing.com
Classic Computing Blog
Classic Computing Show video podcast
"Stan Veit's History of the Personal Computer" audiobook podcast
Retro Computing Roundtable podcast
Historical Computer Society
This is an external voice synthesis box based on an Intel 8031
micro-controller and a TSP5220CNL synthesis chip. It has an RS232
interface, volume and tone knobs, a headphone jack and an RCA jack for
external audio.
Does anybody remember these things and how to talk to them? I've tried
all of the various bps rate and parity combinations from 300 to 19200
and I can't get anything response (data or sound).
Thanks,
Mike
The Victor 9000 had a variable spindle speed, I cant remember if the
drive spun faster on the inside or outside tracks. Also, the index hole
detector was not used. Many of the drives did not have a index
detector, on the drives that did have an index hole sensor, it worked
just as well without it plugged in. I got in a argument about the
ability to use hard sectored floppies in the Victor 9000 with a Victor
sales rep once. Even after I showed him that the index detector was not
connected, he still didn't believe me.
Les
Hi!
I am putting together the next set of S-100 PCB reorders for the S-100
hobbyist group.
The two boards I would like to order next are the S-100 EPROM and S-100 IO
boards.
So far, I have eight builders on the waiting list for the S-100
Flash/EEPROM/EPROM/SRAM board
http://s100computers.com/My%20System%20Pages/PROM%20Board/PROM%20Board.htm
I have eleven builders on the waiting list for the S-100 Serial IO (with USB
and Speech Synthesis)
http://s100computers.com/My%20System%20Pages/Serial%20IO%20Board/Serial%20IO
%20Board.htm
I need about reasonably firm 20 builders on the waiting list to warrant a
PCB reorder.
Both of these boards are going to be respins to correct any issues from the
original boards. They are useful in any S-100 system and offer full
IEEE-696 compatibility.
Please contact me by email LYNCHAJ at YAHOO.COM if interested in either or both
boards. They will be $20 each plus $3 shipping in the US and $6 elsewhere
as per usual arrangement. I will combine shipping on multiple boards to
reduce shipping depending on weight.
Thanks and have a nice day!
Andrew Lynch
On Wed, Mar 2, 2011 at 1:52 PM, Tony Duell <ard at p850ug1.demon.co.uk> wrote:
> One other nice featuroe of these drives is a slotted optoswtich near the
> head carrarriage that changes state at cylinder 43. This is used (I think
> it's a jumper-selected option) to reduce the write current, so you don't
> need to provide the TG43 signal from the controller. Very handy if you're
> using them with a PC/AT controller ;-)
I know it's easy to generate this signal with an inexpensive
microcontroller, but I'm curious what drives have this feature. I
have a TM848 (can't remember if it's -1 or -2 - I'd probably have to
pull it from the Dataram Qbus chassis it's in to check, but since it's
meant to emulate an RX02, it's *probably* a TM848-1) that I was
planning on rigging to a PC-class machine at some point to image my
pile of RX01 and box of CP/M 8" floppies.
Of course with all the DEC gear I have, I might as well look into
using vtserver to pull down RX01 _and_ RX02 images from a real RX02
drive, but I still have plans to build a PC-based multi-media floppy
imaging box, so I'm keeping my eye out for a preferred model of 8"
drive for that purpose.
So far, I really only know a little bit about the SA800s and the
TM848s (and the Calcomps used in RX01s and RX02s, but I'm not likely
to hang one of those off of a PC). Anyone have any recommendations
for good drives to use with PCs?
-ethan
Hi,
A neighbouring hacker space has access to some Motorola 6805 equipment
pulls. These are 6800s with some amount of on-chip RAM, ROM and IO.
I have no idea what the ROM might contain or if you can circumvent the
ROM with your own code in off-chip RAM.
They don't have any plans for these chips. If you are familiar with
them, we'd like to learn more about them. If you need some for your
project, just let me know.
--
"The Direct3D Graphics Pipeline" -- DirectX 9 draft available for download
<http://legalizeadulthood.wordpress.com/the-direct3d-graphics-pipeline/>
Legalize Adulthood! <http://legalizeadulthood.wordpress.com>
---------- Original Message ----------------------------------
From: "MikeS" <dm561 at torfree.net>
Reply-To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>
Date: Wed, 2 Mar 2011 12:32:05 -0500
>> Date: Tue, 01 Mar 2011 14:50:19 -0800
>> From: Geoffrey Reed <geoffr at zipcon.net>
>> Subject: Re: WTD: 8-inch floppy drive
>>
>> IIRC the tandon TM-848-2 drives use 24VDC motors... I always liked them
>> better than the shugart drives.
>>
>
>Me too!
>
>Note that the earlier TM-848s used a belt drive, whereas the 848-2 is direct
>drive (all 24VDC of course).
>
>m
>
What is a typical sales price for a functioning 8" drive? I have some YE data YD180 "surplus to requirements". They run on +5 and +24 VDC. The power connect looks like the connects on 3.5" floppies, about double width. All drives are DSDD
Hi all,
I'm cleaning out my library and have the following set of IBM mainframe security
documentation free for 20lbs shipping from 94025. Sorry, all or nothing - I only
want to make one trip to ship these. These manuals cover the period from early
to late-1980s.
They go to the first person to accept the lot. Will get recycled if not claimed
by 2/2. Have already offered to Bitsavers, and have scanned in case Al wants
later.
Lee Courtney
lee_courtney at acm.org
Auditing Top Secret Overview
MVS Secured using CA-ACF2
RACF Overview
MAJOR COMPONENTS OF AN ACF2-PROTECTED SYSTEM
ACF2 Training Class
Access Control Facility Auditor's Guide
Access Control Facility IMPLEMENTATION PLANNING GUIDE
The Access Control Facility General Information Manual
The Access Control Facility Overview
Access Control Facility UTILITIES MANUAL
ACF2 Composite Index
ACF2 Release 4 Enhancement Summary
The Access Control Facility Administrators Guide
VM Secure Users Guide
VM CMS User Guide and Reference Manual
VMSECURE Quick Reference
ACF2 Reporting System Reference Card
CA-ACF2 Audit Overview
What About VM Security
VM Software Fee Schedule
VM Software Newsletter
AUTOMATING THE AUDIT OF RACF PROFILES
CONSUL Mainframe Security Overview
CONSUL RACF Sample Output
CONSUL RACF User Reference Manual
BoKS Administration
BoKs Release Notes and Getting Started Guide