test-drb September 2009

test-drb@ccmp.vtda.org

163 participants
196 discussions

8/L has been sold. Have ADM-3A for sale.

by charlesmorris＠direcway.com

The 8/L, ASR33, DF32 disk emulator project has been sold. Thanks for all your interest (and offers). Anyone who wants the DF32 emulator schematic and artwork, I can email you a copy. I hope someone can take my "first draft" and make a useful unit for those who are interested. I have a working ADM-3A that I may want to sell also. It has a homebrewed lower-case 2716 ROM (thanks Steve Loboyko for the font files). I installed the "optional" parts for current loop on the main PCB, and used it with the 8/L. The only thing that's missing is the little aluminum panel covering the dip switches. Any interest? Same deal as before, please email offers, "sealed bids". thanks Charles

12 years, 8 months

Perkin Elmer 7300 Pro System Museum Quality!

by mail.list＠analog-and-digital-solutions.com

Here's one some of you might like. Perkin Elmer 7300 Pro System Museum Quality! http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2738081449 Current bid US $9.99

12 years, 10 months

Atari 800xl "translator disk"?

by dbetz＠xlisper.com

I have an Atari 800xl and a couple of 1050 disk drives. I also have two copies of the M.U.L.E. game on disk. Unfortunately, I can't get either to boot on the 800xl. I suspect that these are older games that were written for the 400/800 and may need the "translator disk" that allowed the 800xl to run games written for the older machines. Does anyone know where I could obtain a copy of this translator disk? Thanks! David Betz

13 years

Stag PPZ EPROM programmer

by coredump＠gifford.co.uk

I have a fine old Stag PPZ modular EPROM programmer: http://www.gifford.co.uk/~coredump/inst.htm#PPZ It takes plug-in EPROM (model Zm2000) and PAL (Zm2200) modules, called Z-modules by Stag. I've recently acquired a new module, Zm3000, which looks like a more recent EPROM module. The chips in the Zm3000 are date coded in 1993, whereas the Zm2000 is nearer 1988. The PPZ main unit contains a 6809 CPU and a small CRT display. Does anyone know anything about this system? What about other Z-module types? In particular, should the Zm3000 work with the PPZ, because I currently get an error message "Incorrect Mainframe"? Thanks in advance for any clues! (Virtually all I get from Google is a link back to my own web page!) -- John Honniball coredump(a)gifford.co.uk

13 years

IBM PC Convertible Speech Module.

by netsurfer_x1＠fastmailbox.net

Anyone here have the speech module for an IBM PC Convertible they want to get rid of? I just got one of these laptops & was hoping to score one. David M. Vohs Digital Archaeologist & Computer Historian Computer Collection: "Triumph": Commodore 64, 1802, 1541, Indus GT, FDD-1, GeoRAM 512, MPS-801. "Leela": Original Apple Macintosh, Imagewriter II. "Delorean": TI-99/4A, TI Speech Synthesizer. "Spectrum": Tandy Color Computer III. "Monolith": Apple Macintosh Portable. "Boombox": Sharp PC-7000. "Butterfly": Tandy 200, PDD-2. "Shapeshifter": Epson QX-10, Comrex HDD, Titan graphics/MS-DOS board. "Scout": Otrona Attache. (prospective) "Pioneer": Apple LISA II. "TMA-1": Atari Portfolio, Memory Expander + "Centaur": Commodore Amiga 2000. "Neon": Zenith Minisport.

13 years, 1 month

GNT 3601 tape punch docs?

by chrise＠pobox.com

Probably a stretch but wondering if anyone has any info (manual, pinouts, service documentation) for a GNT model 3601 8-bit (1") paper tape punch. It was probably better known in the CNC / automated machining world than in computing but my hope is to resurrect it as a backup punch for copying tapes I use with my ASR-33 and thereby save wear on the -33's punch. The unit has serial and parallel interfaces on DB25 connectors but I do not have any pinout information for those. The serial one I can probably figure out. Unfortunately, the unit is a little more sick than "works OK" seemed to imply from the eBay seller. It has what I believe to be a power supply problem because as soon as you try to punch all eight holes with the front panel test button, the power LED dims and the punch jams, apparently from lack of umph to complete the mission. It could also be jamming to start with and that causes the power drop I suppose. In any case, looking for any docs before I open it up and start digging around. I have written to GNT without a reply so far. Chris -- Chris Elmquist mailto:chrise at pobox.com

13 years, 7 months

Apple Lisa 1 for sale

by sellam＠vintagetech.com

I have an Apple Lisa 1 for sale. Yes, it has the Twiggy drives. It includes the Twiggy systems OS disks (2), original Lisa 1 manual, keyboard, original Lisa (rectangular button) mouse. It works. Excellent condition. Normally I would not so brazenly hawk something but I need to raise funds for an imminent move of the VCF archives. I'm entertaining any and all offers. At a minimum, there should be three zeroes before the decimal point. Please contact me directly if you're interested. Photos and more detail will be forwarded upon request. Will ship galaxy-wide. Thanks! -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org [ Old computing resources for business || Buy/Sell/Trade Vintage Computers ] [ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]

13 years, 7 months

Reading NorthStar Horizon hard sector disks on PC

by marvin＠west.net

> From: "Chuck Guzis" <cclist at sydex.com> > Not all Northstar diskettes are HS. One of the models (Advantage?) > isn't--and it's that format that the Microsolutions MatchPoint will > read, not the others. It's been too long since I've seen the darned > things... I think the machine you are thinking of might be the N* Dimension. The Advantage still uses 10-sector floppies. I've never seen the Dimension but vintagemicros on Ebay was selling one a while back and had a picture of it. Apparently it was MS-DOS compatible.

13 years, 9 months

ISO HP-UX 9.10 install CD

by aek＠bitsavers.org

I need to get a system running to recover some data from some HPIB drives. Does anyone have one to spare, or an ISO image of it?

14 years, 2 months

HP Integral PC Manuals?

by derschjo＠msu.edu

Hey all -- Picked up an HP Integral PC. Probably paid too much for it but something about a luggable HP machine with a plasma display running HP-UX from ROM seemed irresistible. But I digress. Has anyone archived the manuals for this thing? I've been unable to find anything in my searches on the internet. Found some software archives (and after lubricating the floppy mechanism I've been able to make use of it...) but not much documentation. Docs for the HP BASIC for this machine would be nice, too. I've only played with it for a little while, but it seems like a really neat machine. (Though it seems like this thing is just begging for some sort of mass-storage other than the internal floppy and RAM. Anyone have an HPIB hard disk for sale? :) Thanks, Josh

14 years, 4 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb September 2009