test-drb April 2007

test-drb@ccmp.vtda.org

257 participants
560 discussions

by SUPRDAVE＠aol.com

I've more of these than anyone will need and they're all brand new. 3 packs of Bernoulli 5.25 44meg disks KAO 5.25 88meg syquest disks. The label inside says they are formatted for Macs but includes software for wintel machines also. $1 each plus whatever for shipping and they're yours. Just say how many you want. -- I am not willing to give up my privacy for the false promise of 'security'

15 years, 9 months

2.11BSD Patch 445; FPSIM fixed; 211bsd runs on systems without FPP

by W.F.J.Mueller＠gsi.de

A note to all 2.11bsd users: Some time ago I looked into running 2.11bsd on systems without floating point unit. The release notes state that this is untested and unsupported, and indeed it didn't work. Robin Birch some time ago fixed part of the issues, see patch 434, but still the kernel paniced when the very first program was started. I managed to localize and fix the problem in sys/pdp/mch_fpsim.s. Steven Schultz right away issued 2.11BSD patch #445. All patches up to and including 445 are provided by Steven under ftp://sg-1.ims.ideas.gd-ais.com/pub/2.11BSD A patch level 445 system will now boot on simh for example on a set cpu 11/70 nofpp 4m configuration and work just fine, albeit a little slower. It should thus also work on a real 11/70 without FPP. I heard of some 11/70 with non-working FPP's, so this maybe good news for the owners. With best regards, Walter Mueller -- Dr. Walter F.J. M?ller Mail: W.F.J.Mueller at gsi.de GSI, Abteilung KP3 Phone: +49-6159-71-2766 D-64291 Darmstadt FAX: +49-6159-71-3762 URL: http://www-linux.gsi.de/~mueller/

16 years, 2 months

xt/370 e-mail problem and stacked memory chips illustrated

by michaelryan＠mindspring.com

I have added a few new pictures to the xt/370 web site showing the stacked (and non-stacked) versions of the MCM66128L20, as well as two other examples of IBM engineering that employed stacked chips (AT motherboard and PC memory card) in the early 1980's. There are 36 pairs on the AT board to get 512K and 18 pairs on the memory card to get 64K. Obviously, these chips have different pinouts (at least select). The url is:- www.xt370.net click on the link to the left, 'Memory Technology' The question a data sheet might answer is:- does one of the new MCM66128L20 parts replace one of the old stacked pairs? --- also: -- >Subject: Re: Someone in search of XT/370 software >To: "General Discussion: On-Topic Posts Only" <cctech at classiccmp.org> >He's on the list. I have at least some of VM/PC, but when I tried to >email him to let him know, I got an autoresponse from a white-list >agent, which sent me to an unresponsive URL. It was sufficiently >irritating that I figured it wasn't worth pursuing further. >Seriously, folks, if you're going to ask for help, don't make it >impossible for people to give. >ok >bear Bear's criticism is well-founded. I believe I have corrected the problem; I did receive the e-mails and have responded off-list. At any rate, I greatly appreciate the interest and am sorry for the inconvenience. Mike

16 years, 4 months

Mike Quinn Electronics -- one last chance

by brian＠quarterbyte.com

Hi Folks, As many of you know, the venerable Mike Quinn Electronics in San Leandro, CA (down by the Oakland Airport) closed last Saturday with virtually no advance notice. If you're in the San Francisco Bay Area, you know Mike Quinn is the one of the very last of the nitty gritty electronics salvage shops left, with an emphasis on gritty. I stopped by today, and mentioned to Maurice, the owner, that a lot of people would have liked to have had one last shot at a visit. So, he has extented an invitation to y'all to visit next week, Tuesday through Friday February 7-10, 2006, during normal business hours, for one last shopping spree. He is trying to find a buyer for the stock in the store. This is almost certainly the last chance to visit. If you can, it's worth doing whatever you have to do to make the pilgrimage. Buy some stuff to thank Maurice for keeping it going all this time. There are zillions of connectors and components, heaps of transformers and power supplies, scads of cables and keyboards and monitors and other PC junk, a jet fighter console or two, a couple of early 80's HP desktop computers (the ones with built-in BASIC, can't recall the model numbers), lots of relays, and much more, all arranged in an archaeologically interesting and un-seismically-safe way. If you need it, they have it, and they might even be able to find it. Mike Quinn Electronics 401 McCormick Street (at the corner of Adams and McCormick) San Leandro, CA 94577 Brian

16 years, 4 months

2708 EPROM progreammer - old magazines designs

by dm561＠torfree.net

-----------------Original Message: Date: Thu, 29 Mar 2007 07:48:55 +1000 From: Doug Jackson <doug at stillhq.com> Subject: Re: 2708 EPROM progreammer - old magazines designs John S wrote: > > As 2708s are obsolete few moern programmers support them, apart from a few > > that cost many $100s. So I thought why not try and build one? I've found > > references to the following classic magazines, and I would be willing to pay > > a small fee for photocopies or scans of the articles: > > > > Program your next EROM in BASIC. Schematic for a 2708 erasable read only > > memory reader and programmer which uses parallel IO ports to set data and > > address. The software to drive the programmer is written in BASIC. > > Byte - March 1978 page 84 on (main article) > > Byte - April 1978 page 62 (Byte Bugs) > I have a programmer designed by Steve Ciarcia from BYTE - It uses an 8051AH-Basic (The 8051 with basic embedded) as the controller - and still works a treat - to this day. - Standalone board, interface via serial. It was fun to see peoples faces when you shipped a ^C down the serial line, and dropped through to a READY prompt. I can find the doco for yo, but it is a high end solution to a simple problem. Alternately, I'm more than happy to read an eprom for you, and email contents - I'm in Oz though. Perhaps there is somebody in the US who could do the same. Doug -----------------Reply: I have one of those as well; alas, it does NOT do 2708's. To the OP: I can scan the KB article for you, but the 2708 programmer is intended to work with a Motorola MEK6800-D2, and consists of nothing more than 3 transistors to switch the 27V (and a couple of switches and a socket for the EPROM). It's all done in software. mike

16 years, 5 months

Quadram Quadboard

by geoffr＠zipcon.net

Does anyone have docs for this beastie? it's an apple-II on a card that goes into an XT... or does anyone have any interest in it? it's been sitting on my shelf for ~ 12 years now...

16 years, 5 months

Olivettie Programma 101

by wmaddox＠pacbell.net

There's what appears to be a very nice Olivetti Programma 101 up on eBay, with a little over a day to go and no bids. It's in the Netherlands. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=8801280590&sspagename=AD… The Programma 101 was a very advanced programmable calculator, introduced in 1965. Discrete transistors, delay-line memory, magnetic card I/O. I've exchanged a little bit of email with the seller. He says its been in storage for a long time, and a couple of rubber belts inside have turned gooey, but looks to be complete and in otherwise good shape. If you want a little bit of discrete-transistor goodness, I doubt you can find it in any smaller package than this (Ok, so a 9100A/B has both discrete transistors *and* core memory, but the Programma 101 was earlier.) I don't have any relation to the seller, I just decided that I wasn't going to bid on this, so I'd make sure the list saw the listing -- this is a very desirable machine and I figure someone, maybe one of the UK folks, would go for it. --Bill

16 years, 6 months

Re-finding more items as I open boxes

by DAW＠yalepress3.unipress.yale.edu

> ---------- > From: John R. Keys Jr. > Reply To: classiccmp(a)classiccmp.org > Sent: Friday, February 15, 2002 2:54 PM > To: classiccmp(a)classiccmp.org > Subject: Re-finding more items as I open boxes > > Found the following while unpacking in the warehouse: <<<<<clipped>>>>>> > Took some other goodies home to play with like the 20th Annv. MAC,... > --- 20th Anniversary Mac? You booger... I may have to grab it when you're not looking. ;-) --- David A Woyciesjes --- C & IS Support Specialist --- Yale University Press --- mailto:david.woyciesjes@yale.edu --- (203) 432-0953 --- ICQ # - 90581 Mac OS X 10.1.2 - Darwin Kernel Version 5.2: Fri Dec 7 21:39:35 PST 2001 Running since 01/22/2002 without a crash

16 years, 7 months

Who wants some press in south florida?

by jwest＠classiccmp.org

a media organization in south florida (palm beach, broward, miami-dade counties, cities such as West palm beach, delray, boca, fort lauderdale, hollywood, miami, etc.) is looking for people who collect vintage/classic/old computers regarding an article on that topic they are working on. If anyone is interested in this, please contact me off-list as soon as possible for details. Best regards, Jay West

16 years, 8 months

Apple Disk ][ X-Ray

by grant＠stockly.com

This is my attempt at an "art" x-ray. This image includes the entire range of densities. If I were to penetrate the motor I would blow through the plastic. This is a high resolution x-ray. Zoom into the front label and see if you can read the embossed name plates... What COLOR is this actual drive? The answer is in there! ; ) http://www.stockly.com/images2/061231-Disk_II_Drive-120kv6ma15msDG35SFD.jpg This shot was taken with the drive elevated at an angle by foam so that you would get a 3d feeling and not a flat picture. Let me know if its cool. I may x-ray an entire computer next... : ) Grant

16 years, 10 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb April 2007