>woodelf bfranchuk at jetnet.ab.ca wrote:
>I used a PDP8/S once, does that I mean I need to slow the CPU down?
The SBC6120 is fully static; you can reduce the clock speed to anything
you're comfortable with :-)
On a more serious note along these lines - the HD6120 datasheet gives a
maximum clock of 5.1MHz, however DEC ran the DECmate (-II/PC278, that is; I
don't know about the -I/VT278) at 8MHz. I used to ship 5MHz crystals with
the full kits just to be on the safe side, but I've always run mine at 8MHz
and I know many other people who have done the same. Never found one that's
failed to work at this speed.
Does anybody know if DEC was using specially selected 6120s, or is the
datasheet just conservative?
Bob
A not-so-subtle reminder to keep my weight down.
If you can find a better copy of the picture on this page,
http://www-db.stanford.edu/pub/voy/museum/pictures/display/3-3.htm
(it's in 'Digital at Work') Alan is the chubbiest guy on the team of 14.
see also here for Alan
http://research.microsoft.com/~gbell/Digital/timeline/1965-3.htm
John A.
FYI where on the Stanford page it says:
"Does someone recognize the others?"
They are (seated)
Lydia McKalip, Bill Coburn, Ken Senior, Ken Fitzgerald,
Norman Hurst, Harris Hyman
(standing)
Peter Samson, Leo Gossell, Gordon Bell, Alan Kotok,
Russ Doane, Bill Kellicker, Bob Reed, George Vogelsang.
All:
I thought that some of you might like to see screen shots of
several Cromemco Dazzler games and programs running on the Altair32, sent to
me by a long-time contributor to the project:
http://www.altair32.com/Altair32links.htm (Scroll down to the
"Submitted Files" section).
I don't have the working binaries yet but when I do, I will post
them. This contributor also added support for the Cromemco joystick through
the keyboard. Neat!
Rich
Rich Cini
Collector of classic computers
Lead engineer, Altair32 Emulator
Web site: <http://highgate.comm.sfu.ca/~rcini/classiccmp/>
http://highgate.comm.sfu.ca/~rcini/classiccmp/
Web site: http://www.altair32.com/
/***************************************************/
> I wish the fact that the PDP-8 clone can be hooked upto a IDE drive
> and you have real PDP-8 TTY I/O was more implied at the time. I would
> like to get this clone ( PCB & custiom parts) but I still feel with out
> a paper tape reader/punch you just can't do software right with the 8.
> PS. And the idea of using a PC for a smart terminal *SUCKS*.
I brought one of Bob's boards about 18 months ago, and it works a treat.
The board has a fully supported IDE interface that allows it to "just
Work" with an IDE drive. If you use an adapter, it will work with a CF
Card as well.
On the terminal front, being a PDP-8 clone, it does need a console of
some description. While it does not provide a current loop interface
for the ASR-33, its RS-232 serial just plugs into my VT52.
I highly commend this board to anybody considering one. It sure is
smaller than the PDP-8i that I played with as a kid.
regards
Doug
--
Doug Jackson, MAIPM, MIEEE
Senior Information Security Consultant
EWA-AUSTRALIA
PO Box 6308 O'Connor ACT 2602
Level 1, 214 Northbourne Ave, Braddon ACT 2612
Tel: +61 (0)2 6230 6833
Fax: +61 (0)2 6230 5833
Mob: +61 (0)414 986 878
http://www.ewa-australia.com
============================================
IMPORTANT: This email remains the property of Electronic Warfare
Associates - Australia. If you have received this email in error,
you are requested to contact doug.jackson at ewa-australia.com or Ph
+61 2 62306833 and delete the email. This message is not to be
copied or distributed to other parties without the express permission
of the author. Any personal information in this email must be handled
in accordance with the Privacy Act 1988 (Cth).
============================================
> -----Urspr?ngliche Nachricht-----
> Von: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>
> Gesendet: 04.06.06 18:34:04
> An: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>
> Betreff: Re: How silly can collectors be?
> On Saturday 03 June 2006 15:06, Joost van de Griek wrote:
> > On 6/1/06 11:35 PM, Patrick Finnegan wrote:
> > > Ok, so I thought that the prices on the S/370 consoles were silly, but
> > > at least you were getting something which was obscure and hard to
> > > reproduce.
> > >
> > > How much is a small piece of aluminum with some lettering on it worth?
> > > Aparently, between $125 and $411...
> >
> > Once something is collectible, value is very hard to establish. While such
> > a price for a "small piece of aluminium with some lettering on it" may seem
> > outrageous to you, if it is the final missing piece in someone's
> > collection, that price may be peanuts compared to the increase of the
> > complete collection's value.
>
> I'd agree with you, but I'm pretty sure that in at least fordkdkk, that's
> probably not the case, from what I've learned from other collectors.
>
> Pat
In the above case, I'd say that some people apparently just have too much money and do not really know what to do with it....
Pierre
> --
> Purdue University ITAP/RCAC --- http://www.rcac.purdue.edu/
> The Computer Refuge --- http://computer-refuge.org
______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193
Yeah if you have that manual I'm interested ! Thanks !
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Hi all,
Still looking for a good working Compaq Portable 3 or similar Compaq "lunchbox" portable... preferably one of the plasma screen models. I believe they also made 286 and 386 versions in these. I'll pay a fair price. Will also consider a Compaq Portable 1 or 2 , the CRT versions, if cheap enough. Let me know...
Thanks,
Steve
trs-80 at cableone.net
On Jun 3 2006, 23:09, Tony Duell wrote:
> I am looking for a somewhat similar connector. I am not sure if it's
> AMP or Molex, but I suspect it's one or the other.
>
> It has 5 pins in a straight line. The pins look to be the normal
> 0.093" ones. The face of the socket housing looks a bit like this:
>
>
> /o\
> |o|
> |o|
> |o|
> |o|
> -
>
> That is, 5 pins in a line, with one end of the housing pointed for
> polarisation.
I'm pretty sure this isn't AMP, but it looks like a Molex 0.093" Power
Connector. A lot of these are made in panel-mount as well as
free-hanging styles, but the five-way is only made as free-hanging
according to my old Molex catalogue. However, it says there's a mating
unshrouded vertical header in their 1840 series, and "vertical headers
may be assembled using PC tail terminals in standard housing". The
receptacle part is 03-09-1052, it's 27.2mm long x 6.2mm wide; the plug
part is 03-09-2052, 30.0mm long x 8.6mm wide. Each pin is rated 9A at
250V in these housings.
--
Pete Peter Turnbull
Network Manager
University of York
Hi,
I'm looking for two or three HVD wide SCSI SBUS cards
to connect some storage arrays to an SS20. Does anyone
have any that they would care to part with?
Thanks!
--don