test-drb January 2006

test-drb@ccmp.vtda.org

240 participants
511 discussions

by technobug＠comcast.net

On Sat, 28 Jan 2006 19:09:49 -0600, Jay West" <jwest at classiccmp.org> wrote: > Happened to come across this gorgeous triple bay HP rack. It's the > perfect > (accurate) type for an HP2000/TSB system. Correct PMU/PDU's, etc. > > http://www.alltronics.com/relay_racks.htm > > Scroll down about 9/10ths of the way... under heading "triple rack > cabinets" > > http://www.alltronics.com/images/RackZZ.jpg is a bigger picture. > > If someone wants a really nice setup for HP gear, this is the right > one :) > > Jay West > > > If anyone is interested in racks of this type, let me know and I will put a word in with the local scrapper. I have seen quite a few come through in the last year that were used for test purposes (racks of HP test equipment - mostly removed). Most of these go to the recycler, but so as long as he makes something above scrap he's happy. Equipment is in Tucson, AZ... CRC

18 years, 10 months

Road Trips Re: (no subject) [now RTTY equipment available]

by henk.gooijen＠oce.com

Yes, we always pick up stuff .... it must be some really special pub if you are willing to drive round-trip 1100 km for a beer :-) - Henk. > -----Original Message----- > From: cctalk-bounces at classiccmp.org > [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Richard > Sent: maandag 30 januari 2006 8:55 > To: General Discussion: On-Topic and Off-Topic Posts > Subject: Re: Road Trips Re: (no subject) [now RTTY equipment > available] > > > In article > <447524F844B59D48B8F7AE7F560935EE02CF2657 at OVL-EXBE01.ocevenlo. > oce.net>, > "Gooijen, Henk" <henk.gooijen at oce.com> writes: > > > And every year we make a trip to the UK, and stay at Pete's > in York. > > That also counts for some 1100 km round trip. > > Ah, but are you picking up equipment or just pints of beer at > the local pub? :-) > -- > "The Direct3D Graphics Pipeline"-- code samples, sample chapter, FAQ: > <http://www.xmission.com/~legalize/book/> > Pilgrimage: Utah's annual demoparty > <http://pilgrimage.scene.org> This message and attachment(s) are intended solely for the use of the addressee and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law. If you are not the intended recipient or agent thereof responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by telephone and with a "reply" message. Thank you for your cooperation.

18 years, 10 months

Road Trips Re: (no subject) [now RTTY equipment available]

by henk.gooijen＠oce.com

Edward and I drove from The Netherlands, through Belgium and France to Italy (round trip some 2200 km) for two 11/70's and 3 RM03's and a bit of small stuff ... And every year we make a trip to the UK, and stay at Pete's in York. That also counts for some 1100 km round trip. - Henk. > -----Original Message----- > From: cctalk-bounces at classiccmp.org > [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Doc Shipley > Sent: maandag 30 januari 2006 2:59 > To: General at mdrconsult.com; On-Topic and Off-Topic Posts > Subject: Re: Road Trips Re: (no subject) [now RTTY equipment > available] > > Richard wrote: > > How many of you have done a road trip to get equipment? > > - travelled 50 miles? > > - travelled 100 miles? > > - travelled 250 miles? This message and attachment(s) are intended solely for the use of the addressee and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law. If you are not the intended recipient or agent thereof responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by telephone and with a "reply" message. Thank you for your cooperation.

18 years, 10 months

Solved: Jittery LA36

by henk.gooijen＠oce.com

Congrats on getting a nice LA36 operational. I did a quick check on http://bama.sbc.edu/index.html but Scopex is not even listed! I give the url, because perhaps Scopex is also sold under another name? Never heard of Scopex, but very likely there are quite a few other brands that I never heard of ... - Henk. > Now, next question. Anyone got a service manual for a Scopex 4D25? > > Gordon. This message and attachment(s) are intended solely for the use of the addressee and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law. If you are not the intended recipient or agent thereof responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by telephone and with a "reply" message. Thank you for your cooperation.

18 years, 10 months

Jittery LA36

by gordonjcp＠gjcp.net

Hi there, I've finally got the ribbons for my LA36, unjammed the pins in the printhead and it is printing. It's not quite right yet, though... The printhead often jitters backwards and forwards, sometimes several inches. When you hit "RETURN" it's obviously lost track of where the head is, and slams it into the left-hand stop, where it sits obstinately pressed against the spring. Cleaning up the photosensor bit on the interrupter wheel seemed to help a little. Gordon.

18 years, 10 months

Adding numeric keypad to LA120-AA?

by Useddec＠aol.com

No problem. There are two ways to do this. Replace the kybd with the one piece kybd which has the numeric keypad attached. Or, pop out the plastic filler panel, And install the numeric keypad, which has a small cable that goes to the main kybd. Either way, you must remove the white cover, flip over the keyboard assy, and unscrew the kybd. The entire procedure should take less than 15 minutes. I have both in the keyboard and the keypad in stock. Thanks, Paul

18 years, 10 months

you never know what you can find if you just ask

by dm561＠torfree.net

Message: 29 Date: Sun, 29 Jan 2006 14:55:50 -0800 (PST) From: Fred Cisin <cisin at xenosoft.com> Subject: Re: you never know what you can find if you just ask <snip> >There was a nice "portable" screen made of red and green LEDs. >Now that blue has come down to a reacheable price, that could be >done as a really nice one. ------------- Tell me more! I've got a display unit here that's made of alternating columns of red & green LEDs and I've long wondered why they're not all red as they usually are. Do you strobe both columns with the same data but different duty cycles, or what? mike

18 years, 10 months

Collecting development kits (was: iUP201)

by dm561＠torfree.net

Speaking of... Anybody interested in a Motorola M68HC705KICS K-Series ICS/Programmer? NIB, AFAIK mike

18 years, 10 months

Road Trips Re: (no subject) [now RTTY equipment available]

by pete＠dunnington.plus.com

On Jan 28 2006, 15:31, Richard wrote: > How many of you have done a road trip to get equipment? > - travelled 50 miles? Several times. My ASR33 came from about that far away. > - travelled 100 miles? > - travelled 250 miles? also quite a few times. My Exidy Sorcerer, a Cromemco, a Superbrain, and a couple of complete PDP-11s have all been that far in the back of my car. -- Pete Peter Turnbull Network Manager University of York

18 years, 10 months

grinding down chips was Re: QX10 graphics board

by pete＠dunnington.plus.com

On Jan 28 2006, 12:42, Tony Duell wrote: > Ayone else remember the 'Optic RaM', a poor-man's image sensor. > > >From what I remember they were a normal DRAM chip with a quartz lid to > the package Yes, I remember them. Steve Ciarcia wrote a Circuit Cellar article about them. > (it's been suggested you could take a cerdip 4116 or 4164, > knock off the top and replkce it with a window). And indeed you could, though not all DRAMs were addressed in such straightforward linear fashion as the "proper" one. I had (still have, I think) some Fujitsu 4116s you can do it with. -- Pete Peter Turnbull Network Manager University of York

18 years, 10 months

← Newer
1
...
6
7
8
9
10
11
12
...
52
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb January 2006