I take it that I can notify the owner that these systems are of no interest
to anyone here. I cant take them, too much and too big.
Allison
>
>Subject: Available for pickup.
> From: Allison <ajp166 at bellatlantic.net>
> Date: Mon, 26 Sep 2005 18:42:52 -0400
> To: cctalk at classiccmp.org
>
>
>I do not hold these but I've been asked if I want them.
>
>Allison
>
>
>>I sent this earlier to arrl.org, but I thought I would also try here. These
>>are free to the first taker, but that may be the rubbish man !
>>Apollo 400
>>Apollo 715s/50
>>Apollo 715t/50
>>(2) Apollo 715/64
>>Apollo 400
>
>
I need someone to make a hi-res scan of a single sheet of 8.5x11 fanfold
paper with the perforated side holes still attached. I'm making a graphic
image for a web page background, but without having a sheet handy, it's hard
to gauge the proportions of where the holes should be. Oh, and I need it
five minutes ago. :)
Thanks!
-----------------------------------------
Evan Koblentz's personal homepage: http://www.snarc.net
Computer Collector Newsletter:
>> http://news.computercollector.com
Mid-Atlantic Retro Computing Hobbyists & Museum:
>> http://www.marchclub.org
>> http://groups.yahoo.com/group/midatlanticretro/
> Has anyone come up with an elegant solution to being able to
> use the front panel power switch while keeping it safe?
Can't you sleve it as is done with the power switch on an AT power
supply?
Lee.
..
___________________________________________________________
To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre. http://uk.security.yahoo.com
> Time to go rent an abandoned car factory I would think.
Or an abandoned biscuit factory :)
Norm Aleks and my 4331 system is at the Sunshine Biscuit Factory in
Oakland, CA, in a room that used to be used to store Cheeze-Its
dough.
Brian
>From: "Chuck Guzis" <cclist at sydex.com>
>
>On 1/13/2006 at 2:15 PM Dwight Elvey wrote:
>
>>Hi
>> For these things, it really depends on the flux used. You need
>>to be using a higher temperature flux.
>>Dwight
>
>I'm using a hydrochloric acid-ammonium fluoride liquid flux, which ought to
>do, no?
>
>Cheers,
>Chuck
>
Hi Chuck
I'm not sure, not being an expert, but your problem
sounds like an issue of the flux not holding up to the
temperature.
You should check with the manufacture of the solder
to find what they recommend. Also, sometimes welding
supplies will have some info as well.
If the flux burns off too soon, it won't do any
good. The instant the surface oxides, the solder stops
flowing.
Dwight
>From: "Chuck Guzis" <cclist at sydex.com>
>
>On 1/13/2006 at 2:05 PM Sridhar Ayengar wrote:
>
>>Bismuth-tin solder with high-temperature soldering gear works well
>>enough, doesn't it?
>
>Not really--"high temperature" is relative in this case. I use an
>acetylene-air torch for soft-soldering; many use oxyacetylene (you're
>dealing with a big hunk of metal and local heating is more improtant that
>getting the entire part hot). The problem is that joints are of the
>plumbing sort--you depend on capillary action to form the joint and fill
>any small gaps. Eutectic Sn/Pb is ideal. The substitutes, including some
>rather expensive indium alloys that I've tried, just don't flow the same
>way.
>
>I don't know of any plumber who perfers lead-free solder to the leaded
>kind.
Hi
For these things, it really depends on the flux used. You need
to be using a higher temperature flux.
Dwight
I think this listing may be of interest to collectors of old IBM stuff.
I don't think
the seller has the slightest idea what the fiche document, and they
copied the
term "System 3" into the listing like they were clueless. Any system 3
people
may want to pounce.
7736615631
Jim
> [snip - very instructive part]
>
> However, I now know much more about RL drives than I care to, and
> can fix the logic if it ever really does fail :)
>
> -Charles
Yes, working your way through the schematics, actually measuring the
signals, makes you "learn" how something works - in detail!
I know a little more about the M7859 11/34 console than I did, say
2 months ago ...
- Henk, PA8PDP.
This message and attachment(s) are intended solely for the use of the addressee and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law.
If you are not the intended recipient or agent thereof responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify the sender immediately by telephone and with a "reply" message.
Thank you for your cooperation.
Hello all,
Regarding the recent talk about using hard drive carriers (in order to
reduce the number of machines in your environment, etc.), has me wanting to
invest in a few.
Is there a specific brand anyone uses?
I have one drive carrier I purchased years ago (at a local mom & pop
computer store for something like $15) -- a cheap, no-name brand (can't
even find a brand name on it). The drive connector in the tray is flimsy,
it is a pain in the a** to get the drive in and out of the tray, and it
just generally doesn't give me a real cozy feeling of sturdiness when using it.
So I ask, are there specific brands of these carriers people use? Where do
y'all purchase them?
Regards,
-Eric
I was playing blackjack (BASIC program) on SIMH with my OS/8 RL02 image. I noticed that every time I played the game the cards drawn were identical, both by the dealer and myself! A loop to print RND(0) ten times always shows the same ten numbers... doesn't sound very random to me :)
Is this an artifact of SIMH, or BASIC? (Will it go away when I run the program on the real 8/A)?
thanks
Charles