>From: "Pat Fitzpatrick" <Pat_Fitzpatrick at pmc-sierra.com>
>
>Hi List,
>
>I've been a collector (and user) of obsolete computer systems for many years.
This list looks like a great source of information. Anyhow...
>
>Until our basement flooded a couple of weeks ago, I had:
>
>IMSAI 8080 with NorthStar Disk, KSR33 Teletype and Lear-Siegler ADM3A Terminal
>A very strange home-built S-100 system
>Apple II plus with Pascal Language System
>Intel intellec 800 and MDS230 development systems
>Sun 3/160 Solaris (some version or other)
>HP64000 development systems with HP7912 disk
>HP9816 computer
>IBM PC and XT, 286, 386... (yeah, who cares)
>
>One thing I have learned form this experience is that computers do not, in
general, swim well. Anyhow, I now have a whole lot of partially useful
computers, boards, documentation, software etc.
>
>The only things I care deeply about are the IMSAI ('cause I've raised him from
a pup) and the HP64000s (which I use as my logic analyzer and EPROM programmer
-- among other things).
>
>The IMSAI box and the terminal are ok, but the disk drive (an SA400, I believe)
and (worse) the box of floppies didn't make it. The drive might be salvageable,
but I'm afraid the diskettes are toast. Does anyone out there have any 5-1/4
inch 10 sector (hard sectored) floppies? And a copy of the NorthStar DOS and
BASIC that they'd like to sell/trade/etc?
Hi Pat
I think that the floppies will make it if you remove them
>from the envelopes and rinse them off. I don't think there
are any problems with being in water, otherwise.
Most everything else should be cleaned up except switches
and bearings. Mostly just washing the stuff with clean water
and drying well.
>
>As for the HP64000s, the consoles are ok, but the disk drive drowned. From a
quick search, I'm not real optimistic about finding another HPIB disk drive and
I'm not too excited about plunging into this one to try and fix him (he was
running when the waters came and he smells very bad).
This is not good. Anything that was powered up when inundated
is most likely in poor shape.
Dwight
Has anyone ever taught a PC (for example) with a GPIB card to think it's a CS80
Drive?? Does anyone have a spare disk gathering dust? Failing that, does anyone
(besides me) still use these things? The consoles are probably too heavy to
ship, but I have lots of cards, software, manuals etc in working order if anyone
needs them.
>
>As to the other stuff, some is good, some isn't but if anyone needs any parts,
I might be able to help out.
>
>Pat Fitzpatrick
>
> -----Original Message-----
> Subject: New to list -- Many Issues -- Many Parts Available.
>
> Hi List,
>
> I've been a collector (and user) of obsolete computer systems
> for many years. This list looks like a great source of
> information. Anyhow...
>
> Until our basement flooded a couple of weeks ago, I had:
<much misery snipped>
You must be heartbroken - I know I would be.
Any circuit boards that were soaked can be washed in a dishwasher. I've
discussed this here before so I won't bore anyone with the details - but
if you need details let me know.
----
There are only 10 types of people in the world, those who understand
binary and those who don't.
> -----Original Message-----
> Subject: IBM Token Ring
>
> Originally this topic was about Apollo TR but several
> questions have come up about IBM TR. I happen to have spent
> several years with different vendors of IBM Token Ring
> hardware and IMHO am somewhat of an expert on the topic. I
> would be glad to answer any in depth questions but I suspect
> that the majority of the list members would be bored. On the
> other had there is always the delete key. Either way, let me know.
I spent a year working for Proteon. I got a good lesson in all things
Token Ring too. I still love it, but I'm not running any at this time.
I'm not sure, but I might be the first person to have witnesses TCP/IP
routed on TR hardware (at least commercially). My understanding is that
Proteon offered that ability before anyone else, and I prototyped the
boards and tested them.
----
There are only 10 types of people in the world, those who understand
binary and those who don't.
>
>Subject: Re: BA123/RQDX3 floppy question
> From: Pete Turnbull <pete at dunnington.u-net.com>
> Date: Thu, 21 Jul 2005 00:54:51 +0100 (BST)
> To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>
>
>On Jul 20 2005, 12:56, Brad Parker wrote:
>>
>> I have two other questions:
>>
>> - can I pull out the distribution board and pop it into another QBUS,
>say
>> on an 11/23+?
>
>Yes, it needs power and ground (for the terminators and buffers) but
>has no other connections to the backplane.
>
>> - do I need the front panel 'thing' (the led board) or can I leave it
>> disconnected?
>
>You need it. I can't remember if it's the READY line or the WR.PROT
>that usually ends up in the wrong state otherwise, but one of them
>needs to be there (the READY line has to be grounded, IIRC).
>
>You can kludge it pretty easily. The layout and schematic for the
>M9058 distribution board are on my web site, along with the schematic
>for the LEDS-and-switches circuit.
> http://www.dunnington.u-net.com/public/RQDX/
Yes you do need the frontpannel disk insert. There is both write protect
and online functions. The alternate is just hard jumper it for enable
on both.
Allison
On Jul 20 2005, 12:56, Brad Parker wrote:
>
> I have two other questions:
>
> - can I pull out the distribution board and pop it into another QBUS,
say
> on an 11/23+?
Yes, it needs power and ground (for the terminators and buffers) but
has no other connections to the backplane.
> - do I need the front panel 'thing' (the led board) or can I leave it
> disconnected?
You need it. I can't remember if it's the READY line or the WR.PROT
that usually ends up in the wrong state otherwise, but one of them
needs to be there (the READY line has to be grounded, IIRC).
You can kludge it pretty easily. The layout and schematic for the
M9058 distribution board are on my web site, along with the schematic
for the LEDS-and-switches circuit.
http://www.dunnington.u-net.com/public/RQDX/
--
Pete Peter Turnbull
Network Manager
University of York
I've been offered one of these - anyone know anything about them? Google
seems reluctant to divulge any info...
We've got three Whitechapel MG-1 machines so I pounced on this one as a
different example of the Whitechapel line - but I've been unable to find
any info on it so far.
As the MG-200 is appears to be a faster version of the MG-1, I'm
assuming that the CG-200 is a variant on the MG-200 (likely with better
video ability).
The current owner was also told that it uses a Z8000 CPU, but I'm
reasonably confident that it'll turn out to be a Natsemi 32016 like the
other Whitechapel machines...
We've got a few manuals for the MG-1, so hopefully it's similar enough
that the docs will be relevant!
cheers
Jules
Got this one the other day - we don't need any more PET or QL stuff, and
he's given me permission to post here.
Contact him directly if interested - he's got a couple of weeks before
he moves apparently.
cheers
Jules
-------- Forwarded Message --------
From: Chris Jones <member at chilemonster.freeserve.co.uk>
Reply-To: member at chilemonster.freeserve.co.uk
To: donations at retrobeep.org
Subject: Donation offer
Date: Tue, 5 Jul 2005 08:43:53 +0200 (CEST)
Hi Jules,
I have two commodore CBM computers from the 80s which still work (an
8032 and 4032 upgraded from and labelled 3008). There is also a 5.25"
disk drive (working) plus manuals/books/software etc. Would you be
interested in adding them to your collection, or know someone that
would? I am moving house and will readily donate them - I dont really
want them to end up in land fill!
There is also a sinclair QL and memory expansion/manuals etc.
Thanks
Chris Jones
Abingdon
To help better understand Tony's (Duell) discussion of the 9810
repair, have a look at
http://www.rheinfeld.de/andreas/9810.htm
where Andreas also describes his repair of an 9810 using Tony's
schmatics (available on the HPCC cdrom).
**vp
I finally got a response from the buyer of that "Apple-1" on eBay a few
weeks back. In a nut shell, he said he suspected it was probably not an
Apple-1 but he thought he'd take a chance anyway, and when he received it
his "intuition" was confirmed.
He thinks he got a good deal anyway because he says it was some sort of
homebrew electronic "music box".
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]