Does anyone have docs for this beastie? it's an apple-II on a card that
goes into an XT... or does anyone have any interest in it? it's been
sitting on my shelf for ~ 12 years now...
> ----------
> From: John R. Keys Jr.
> Reply To: classiccmp(a)classiccmp.org
> Sent: Friday, February 15, 2002 2:54 PM
> To: classiccmp(a)classiccmp.org
> Subject: Re-finding more items as I open boxes
>
> Found the following while unpacking in the warehouse:
<<<<<clipped>>>>>>
> Took some other goodies home to play with like the 20th Annv. MAC,...
>
---
20th Anniversary Mac? You booger... I may have to grab it when
you're not looking.
;-)
--- David A Woyciesjes
--- C & IS Support Specialist
--- Yale University Press
--- mailto:david.woyciesjes@yale.edu
--- (203) 432-0953
--- ICQ # - 90581
Mac OS X 10.1.2 - Darwin Kernel Version 5.2: Fri Dec 7 21:39:35 PST 2001
Running since 01/22/2002 without a crash
Well, the Univac III is back: UNIVAC III Computer (In Storage since 1975),
eBay auction Item # 2733726990. This time the starting price is $7,500 and the
buy-it-now is $11,000.
The URL is:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2733726990&category=1247
OK, somebody, jump right on it! :-)
(Not me, I'm into LITTLE computers like PDP-11's and VAXen, with an occasional
side dish of 6502 or 8085)
Stuart Johnson
Certainly, there are a lot of logic analyzsers (or
analysers, if you are English) floating around. I was
told by a guy who specializes in "refurbished" (i.e.
dusted off) test equipment that this is because a lot
of it is gov't surplus where they just grab the unit.
He also mentioned that a lot of university surplus has
partially blown pods because of carelessness - due to
the nature of what they do, not much protection on the
inputs.
I have a Tek 1230 which I was lucky enough to get some
pods with. I had another one w/o pods and GOOD LUCK on
getting schematics, etc on this stuff - it's a "black
art" proprietary sort of thing.
=====
-Steve Loboyko
Incredible wisdom actually found in a commerical fortune cookie:
"When small men cast long shadows, then it is very late in the day."
Website: http://juliepalooza.8m.com/sl
__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/
Just got back from Radio Shack. I bought a fast blowing 250v 2 amp fuse
and installed on in the laserdisc player. Unfortunetly, it blows just
as fast as the .75amp fuse. So.... that means I have a dead short
somewhere, right? How do I go about checking that?
Chad Fernandez
Michigan, USA
>it's a museum!!! Emulate hardware for display?
I agree, I?m running two 2883s on Access under simulation. I run a single
7900 on the TSB E version, and a single 2883 on the F version.
The largest real Access system I ever owned/ran had 1 7920 and 3 7900s. What
is that, about 47MB. So two 2883s at about 25 MB each would just over the
largest real system I ever ran.
If you want real drives, the most rugged of them was the 7900, IMHO. The
7920 was fine, but not as tough as the 7900. The 7905 was the one that
seemed to me to crash for no reason at all. I always held my breath when I
spun up one of those. It seemed as though every time I got one for my
inventory I would have one fail on a customer?s site. So I cursed that drive
so much that I would never even try to run one on my systems.
BTW
Jay, Al,
I have a set of 2100 Access micro-code. My brother has offered to take a
shot at making copies of the ROMs. He did it once before for me in the early
to mid 80s. Perhaps if he can make 2 copy sets, we could send one set to Al
to be read and archived, and when he?s done have him forward them to Jay to
test the copies in real hardware.
Hey guys...
I have a line on a Convex machine. The current owner is a guy
who attends Govt. auctions and buys bulk, then scraps out stuff for
gold/parts/etc... He calls me when he finds anything interesting, so...
He says this is a Convex SPP3. (it's _heavy_... around 400 Lbs.) I
haven't seen it yet, so I don't know anything more right now.
Unfortunately,
I have no knowledge of Convex stuff, and a web search turned up some
Convex SPP stuff, but not much, and _nothing_ on an "SPP3". Can anyone
enlighten me further? (Yep, I know it's an SMP architecture of some sort,
but
little more than that).
A couple of questions...
Is this machine historically significant? (I.e. worth saving?)
Does anyone know of a source for documentation? (I've done a prelim.
web/newsgroup
search, but haven't turned anything up)
Does anyone have (or know where I can find) a copy of an OS for it
(apparently
it's a unix variant. He told me that the disks were missing... not unusual
for an auction item)
400 lbs is a bit large for me, but if there is a remote chance I can bring
this
critter back to life (and it's worth saving) it's probably worth the effort.
I'll going to
try to take a look at it and try to get some sort of model#/ident. Anything
I should
be looking out for or wary of?
-al-
-acorda(a)1bigred.com
I wonder how long it will be before some fool donates a PDP or some
other piece of kit we hold near and dear to our hearts, to these miscreants.
Sure, it's amusing when it's a 286 being pipe-bombed, but probably not
so much fun (for me, anyway) when they get their hands on an Amiga or a Sol.
It's all fun and games until someone loses an eye...
http://www.letsblowitup.com/default.shtml
Hello all,
Does anyone have any information or instructions on how to connect the 4P to a display? I have the computer but I'm not able to connect it to anything. There are 6 what appears to be RCA type plugs on the back, 2 wide by 3 tall, with + over one column and - over the other. What do I need to do to get this thing working?
I also have an Intellec 4 that I am trying to find accessories and information for.
Thanks,
Jeff
