I found this while poking around at the Smithsonian's site.
<http://smithsonianchips.si.edu/ice/4004thb.htm>. In Windows you can click
on each picture to get a larger view then you can right click on each
individual picture and save just the brochure page.
Joe
At 09:29 PM 4/16/04 -0500, Jay wrote:
>> > Model Rockets, anyone?
>That used to be a HUGE hobby of mine. Haven't done anything with it in
>years. I want SO bad to get back into it, and design heavier rockets than
>balsa and cardboard. Need a better propellant though - love to try LOX.
>that's not the the real goal that makes me want to get back into it. I want
>to program microcontrollers to launch inside of it and regulate movable
>control surfaces. I want to paint a huge target on the ground (grass), and
>the competition would be to see how close you could get the rocket to target
>(and hit) the bullseye.
Hey Jay,
Also thanks for Uncle Sam I have a large quantity of these
<http://www.analog.com/Analog_Root/productPage/productHome/0%2C2121%2Cgeneri
c%253DADXL150%2526level4%253D%25252D1%2526Language%253DEnglish%2526level1%25
3D212%2526level2%253D%25252D1%2526level3%253D%25252D1%2526resourceWebLawID%2
53D0%2C00.html>.
Do you want some to play with?
Joe
I just got word from a friend that a company in Kansas City is planning
to dispose of the following.
DEC VAX 785 in three 6' cabinets
DEC PDP 11/70 in ten 6' cabinets, this may be two computers
4 RM03 disk drives
2 TU80 tape drives
Other disks for VAX
That is what they remembered without actually having a list.
I'm trying to set up a time to actually see them.
Here is the other information I have received.
There is a company from Topeka that will take them away if they are paid
to remove them.
The 785 was running 3 months ago when they erased all of the media.
It has been about a year since the 11/70's were on.
They are not currently running.
They are checking on the legal requirements that they may have to go
through to dispose of these units.
They are worried about making sure they aren't legally libel if somebody
dumps them improperly.
Whoever takes them away may have to be a GE approved vender.
I'll keep everybody informed.
Thanks
Mike
>From: "John Allain" <allain(a)panix.com>
>
>> ( looks like a little triangle from each side ).
>
>You've mentioned the pro-'s. For a con, there's the fact the the
>length of the bent edge is 40% greater, meaning that residual
>restoration force (to unbend) will be greater.
>
>John A.
Hi John
An issue for the plastic tags but not for the aluminum ones.
I always prefold the plastic ones with good success. It
is still a pain.
Dwight
>From: "Scott Stevens" <sastevens(a)earthlink.net>
>
>On Fri, 16 Apr 2004 13:47:42 -0700 (PDT)
>Cameron Kaiser <spectre(a)floodgap.com> wrote:
>
>> > I also collect recent vintage United States banknotes
>>
>> So do I. I have this bad habit of trading them away, though. ^^
>>
>
>I got a 1934 $10 bill in change last week. I collect foreign coins, older ones
preferred, and only (for the most part) in copper. You can get a 17th century
British farthing for under $5 most times. I love the history more than the
'value' of the pieces. Same as I do with old computers.
>
>
Hi
I'd like to collect gold coins when I find them. I've
not found any yet but I always keep an eye out for them. ;)
I have found some gold, panning, but not enough to do
anything with.
Dwight
I have the Vector Graphic machine listed in the subject line. It
is a tan S-100 box with black panel, and a tan monitor that
carries a logo plate that says "VECTOR MT".
This Vector is equipped with a hard drive and a single DSDD 100tpi
floppy disk drive. The hard drive controller (ST-506 interface)
and the floppy drive controller (16 hard sector) are contained in
the same S-100 card. The card etch dates it as 1980, and a silk
screened note says it is a "FD & HD Controller".
Despite considerable time spent with google and other search
engines, I have been unable to locate any information of value
about this machine.
I have been using it quite successfully for some time. However,
very recently, access to the floppy has become most erratic and
the usual result is the error message "DRIVE NOT READY".
However, on occasion it is possible to read the directory and read
some of the files on an installed disk.
I suspect that the cause of the problems are with the controller
card, but without documentation I hardly know where to start any
troubleshooting.
So, to the point of all of this! If anyone has any documentation
on this machine that they would be willing to share with me,
please contact me either privately or publically. It will be
highly appreciated!!!
- don
Hi
Other collections:
1. Pinball machines ( takes a lot of space ).
2. Old battery radios.( middle to early 20's )
3. Interesting mechanical things ( like a coffee cup Stirling engine ).
4. Telescopes
5. Like others, boxes and boxes of data books and manuals.
6. Empty soda and beer cans that I intend to get recycle redemption for.
Dwight