I have two DEC boards left from my clean out. They are
M8200 YA
M8201
Good shape, untested.
$8 for both + shipping. Please send me your zip code and I prefer paypal.
Thanks! Norm
I had someone pick up the Amiga stuff, but I still have some things
that have to go:
Calcomp 1043GT "E" plotter with a couple of hundred pens
Numonics 2200 "E" size digitizer with power supply, puck and cables
Tandy 2000 with keyboard, VM-1 monitor
Tandy 1400LT with power brick. The battery is dead, but the syatem
boots. Batteries+ said that they could rebuild the battery.
Everything works, I just don't have the room anymore.
If nobody wants this stuff, it's going to the curb.
I'm located in Rockwall, Tx but I work near downtown Dallas. Almost
any area in the metroplex can be arranged for a pickup.
--
http://webpages.charter.net/jrice54/classiccomp2.html
>anyone have any of these floating around? I may need a few in the near
>future
I have one, but I'm not sure if it works 100% of the time. I've had
problems with it in the past, but I never bothered to debug enough to see
if it was the drive, or something else (it was only used for one job, and
the client for that job was notorious for sending bad disks, so it could
simply have always been the disks).
Its a 3.5" in a 5.25" half height case (not a removable adaptor shell,
but an actual 5.25 casing). If you want it, you can have it for the cost
of shipping from 07450.
-chris
<http://www.mythtech.net>
In a message dated 3/27/2003 11:56:37 PM Eastern Standard Time,
spc(a)conman.org writes:
<< I thought you guys might enjoy the following photographs of a 486 based
NCR 3230 that is *still* in use, as a colocated server running a dozen
websites (including mine [1]) and email:
http://www.conman.org/people/myg/photos/tower486/
The photos were taken by my friend (who happened to stop the colocation
facility for another reason). >>
I've got one even better! Some companies are still using Atari Mega STs to
run mail inserters. I'm trying to get one of these machines from a site that
is upgrading.
> I have installed OSF/1 on the AXP 7000 and it's working. Quite a bit
> more snappy than the VAX6460. Man, I have no room for this machine
> left and now I love it so much!
I don't doubt it's a nice machine, much larger than I'm brave enough to
tackle though. The biggest such machine I'd like would be a VAX4000 class
system. Eventually I'd like to get something like an DS20 or ES40 for
running VMSon.
> I'd give you login account (over my dialup IP) just the problem I
> am having is that after I built the custom kernel it still won't
> let any user other than root login. It says "too many users logged
> in alread, try again later". And that with zero users logged in
> at the time. Can you think of any file I might be overlooking?
> I can only think of /etc/nologin or something. My maxusers is at 32
> in the kernel configuration. I can't think why this would not be
> correct in the kernel.
Do you have License PAK's installed that allow multiple users? For that
matter, do you have any License PAK's installed? If you don't have
licenses, a lot of stuff won't work.
Zane
First, what's the significance of the FC on the model number?
Second, I went through chassis and here's a list of the cards in it. QED stands for Quickware Engineering & Designs. They made several of the cards in this one. Anyone have any info on them? H,Q,U stand for Hex-bus, Quad-bus and Uni-bus respectively. Anyone want to take a stab at id'ing these cards?
Slot: Card:
4 M7231D H Data Path
7 CI M60 made by QED Q
9 90 CPU made by QED has DCJ11-AA IC Q
11 MS 95 made by QED H
15-16 M920 U
19-20 M920 U
16 M7254 Q
17 M7255 Q
18 M7256 Q
19 M7257 Q
22 M7762 H
23 Tektronix CL3 Date/Time Option Q
24 Datasystems DLP-11 Q Printer card?
27 M7228 Q
29 M7800 Q
31 M7800 Q
33 M7800 Q
36 M7911 Q
37 M7912 H
38 M7821 fits in single slot (#2)
38 M105 fits in single slot (#3)
38 M796 fits in single slot (#4)
38 M930 U bus terminator? installed in bottom two slots
39 M795 installed u[pside down. Is this correct?
Joe
I recently acquired an Apple II graphics tablet, along with the controller
and a plastic overlay that isn't in great shape. Does anyone have any
overlays for this thing? It's really cool and I'd like to get it all cleaned
up nicely and connected to my II+.
--
Owen Robertson
