test-drb February 2003

test-drb@ccmp.vtda.org

337 participants
780 discussions

by Mark.Meyrick＠beck-pollitzer.com

Dear Sir, We have a client who is desperate to purchase an MVME 333-2, can you give me an idea of where I might get hold of one of these. We regularly get requests to find old XVME equipment so please keep me informed of any equipment you aquire and I will do the same. Best regards Mark Meyrick Technical Project Manager Beck & Pollitzer Control Systems Tel: 0044 1621 890310 Fax: 0044 1621 890319 ________________________________________________________________________ This message is intended solely for the use of the individual or organisation to whom it is addressed. It may contain privileged or confidential information. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you should not use, copy, alter, or disclose the contents of this message. All information or opinions expressed in this message and/or any attachments are those of the author and are not necessarily those of Beck & Pollitzer Engineering Ltd. Beck & Pollitzer Engineering Ltd accepts no responsibility for loss or damage arising >from its use, including damage from virus. ________________________________________________________________________ This e-mail has been scanned for all known viruses by MessageLabs. ________________________________________________________________________

21 years, 10 months

Identifying a Motolora chip - MC14544?

by jplist＠kiwigeek.com

Howdy folks; I'm trying to identify a Motorola chip for my father - his guess is a 300 baud modem... The chip comes from circuitry which allows folks to remotely control the lights on a runway. All of the breakers/generators are in a little shed at the end of the runway, but there is a controller board in the tower to allow you to turn on lights without having to trek down to the shed... Unfortunately said controller is broken, and my old man has tracked it down to this chip. Any help would be greatly appreciated; Particularly since the people that own the property have sold off the end of the strip to a local farmer who keeps cows there... And the other pilots are a bit too soft to leap the fence and wander through a herd of cattle in the middle of the night just to turn on the lamps... Thanks! JP

21 years, 10 months

"Real Computers" (was Re: Trivia Question)

by Robert_Feldman＠jdedwards.com

The Osborne 1. -----Original Message----- From: Fred Cisin (XenoSoft) [mailto:cisin@xenosoft.com] Sent: Saturday, February 22, 2003 2:27 PM To: cctalk(a)classiccmp.org Subject: Re: "Real Computers" (was Re: Trivia Question) <snip> How many CP/M machines provided both schematics and source code?

21 years, 10 months

BA123 and disks (RE: QBUS SCSI card...)

by Fred.van.Kempen＠microwalt.nl

True, the various ESDI disks are proving to be a fine and reliable replacement for the RD drives, using the same form factor. My MV4 (in a BA123) has three Hitachi drives, 680MB each, and are emulated as RA82's. Nice, reliable and _fast_ ! These drives, and the controllers (Sigma, ADC, Emulex, Dilog) are real cheap now. --f > -----Original Message----- > From: Mail List [mailto:mail.list@analog-and-digital-solutions.com] > Sent: Monday, February 24, 2003 4:38 PM > To: cctalk(a)classiccmp.org > Subject: Re: QBUS SCSI card... > > > Hello Gene, > > Even though RD-5x fit in there fine, what is probably an inexpensive > but more reliable solution than the RD-5x is to go with 5.25" FH > ESDI drives as some other "personal users" have done. They > come in larger storage capacities than the RD-5x drives too. > Pick up a Sigma SCD-RQD11/EC when it shows up on eBay > for around $35 to $50 ( or even less these days? ), and ask > Mark Green about an ESDI drive. He got all four ( some of them > around 600 Mb ) that I had a couple of years ago for what would > have averaged out to $10 each ( plus shipping ). > > > Best Regards > > > > > At 06:57 AM 2/24/03 -0800, you wrote: > > > > That's just amazing. I never knew the demand for > those things was that > > > > high. I wish the guy that was doing the IDE > controllers had entered > > > > production. :) > > > > > > I think a lot of people, "personal users" too, are > getting tired of > > struggling > > > with RD-5x drive unreliability, and/or want the larger > storage capacities > > > they could obtain with SCSI > > > >Well I've got a KDA-50 board set so I'm not _totally_ out in > the cold, but > >it sure would be nice to use a drive that a) wasn't 150lbs > (RA81) and b) > >wasn't 3 feet long (RA92). Neither of which fit in the BA123(? nice > >roll-around chassis, card cage is on the right side) > enclosures that my 2 > >MicroVAXen use. > > > >g.

21 years, 10 months

Info wanted: IBM vacuum tube digital computer demonstrator

by rigdonj＠cfl.rr.com

Yes, that's the item but I'm pretty certain that he's wrong about it being a field engineer's test set. A couple of list members have tracked down several of these but no docs yet. Joe At 04:42 PM 2/24/03 +0100, you wrote: >On Sun, 23 Feb 2003, Joe wrote: > >> Can anyone tell me more about this thing or even (HOPEFULLY) have a >> manual for it? > >Hi Joe > >Could be this one: >http://www.newbegin.com/itemmis_28.html > >Max

21 years, 10 months

Info wanted: IBM vacuum tube digital computer demonstrator

by massimo.vettore＠zf.com

On Sun, 23 Feb 2003, Joe wrote: > Can anyone tell me more about this thing or even (HOPEFULLY) have a > manual for it? Hi Joe Could be this one: http://www.newbegin.com/itemmis_28.html Max

21 years, 10 months

M9312 Bootstrap Questions

by GOOI＠oce.nl

Well, my 11/34C has the M9312 in it. See www.pdp-11.nl and click on the folder PDP-11/34A. Inside that folder is a folder called CPU information, in there is the folder options, and the last item is the document "bootstrap" (M9312). Maybe that's a little help. I have a scan of the M9312 manual and also of the M9301 manual wich will be at Jay's in a few weeks ... - Henk. > -----Original Message----- > From: Andreas Freiherr [mailto:Andreas.Freiherr@Vishay.com] > Sent: maandag 24 februari 2003 13:49 > To: cctech(a)classiccmp.org > Subject: Re: M9312 Bootstrap Questions > > > Jeffrey, > > are you sure the 11/34 manual is talking about the M9312? - I seem to > remember that my copy describes the M9301, of which, IIRC, there are > -YA, -YB, and -YF versions. > > Since all M9301s are completely different from the M9312, it > would be no > surprise if you cannot match the switches between docs and hardware... > > Andreas > > Jeffrey Sharp wrote: > > Ok, I got my PDP-11/34 mounted in its rack and have started to audit > > jumpers, switches, etc. I am being cornfused by the M9312 bootstrap > > terminator module. > > > > First, I'm confused about what version of the module I > have. My 11/34 user's > > manual (EK-11034-UG-001 '77) talks about a -YA, -YB, and > -YF version of the > > board. My M9312 manual (EK-M9312-TM-003 '81) talks only in terms of > > bootstrap ROM part numbers. The DIP switch references in > the two documents > > conflict, even differing on the switch settings necessary > just to boot into > > the console emulator. > ... > > -- > Andreas Freiherr > Vishay Semiconductor GmbH, Heilbronn, Germany > http://www.vishay.com

21 years, 10 months

QBUS SCSI card...

by mail.list＠analog-and-digital-solutions.com

Gene, I took a look at the CTP dealer listing index, and the current listed prices for UC08's run from a low of $300 to a high of $750 Out of the 12 listed that have prices showing, the average is $511.25 There was a UC07 recently on eBay in the UK that sold for GBP 252.00 (currently approx. US $397.91 ) EMULEX UCO7 Q-BUS SCSI CONTROLLER FOR DEC http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=1247&item=2307510324 With variations in exchange rate, that US equivalent was about $420 on the day it closed. Best Regards At 09:49 PM 2/23/03 -0800, Gene Buckle wrote: >Why is it that the UC08 SCSI controller on ePay right now is going for a >buy-it of$799? Are QBUS SCSI controllers THAT rare? I was going to try >to find one for my MicroVAX II, but not for that kind of dosh.... > >tnx. > >g.

21 years, 10 months

Transitional Technology Qbus SCSI controller

by mail.list＠analog-and-digital-solutions.com

Hello, I just received this inquiry from a "personal use" user about a card that I am not familiar with. If any of you want to help him out, his address is included. Wasn't someone asking about a differential scsi controller lately? If he'd have better use for a single-ended, and someone else needed a differential, perhaps you'd have a trade. Best Regards From: Robertdkeys(a)aol.com Message-ID: <54.b0c1e41.2b8b0e5b(a)aol.com> Date: Mon, 24 Feb 2003 00:57:47 EST Subject: QTD-1 qbus diff scsi board - you folks know anything about??? Since you folks deal in legacy qbus things, I was wondering if you might know anything about a Transitional Technology, Inc., model QTD-1 differential mscp/tmscp scsi controller? I have one that a friend sent me, to use in an MVII machine, but I can't seem to find out any information anywhere about the board. It is dated 1989, but must have been made by one of the lesser qbus card manufacturers. If you know anything about this particular board, I would be most interested in finding out the particulars, so I can get this thing running. Thanks R.D. Keys robertdkeys(a)aol.com

21 years, 10 months

PDP11 - RQDX1 standalone format utility?

by chpap＠ics.forth.gr

I would like to do a bad sector scan on a RD52 connected to a RQDX1 controller (The machine is a pdp11/73 without OS) prior to installing BSD2.11.Is there a standalone program like zrqch0(standalone version of zrqc from the xxdp package - only for RQDX3) that can be downloaded directly to the pdp via vtserver and recognizes the RQDX1 , i.e. a version of zrqb or something similar?

21 years, 10 months

← Newer
1
...
18
19
20
21
22
23
24
...
78
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb February 2003