> -----Original Message-----
> From: Bob Lafleur [mailto:bob_lafleur@technologist.com]
> I will shortly be receiving a MicroVax 3100/90 and a TK50Z-GA
> tape drive.
> Both have SCSI, and I assumed they would work together.
> However, I just read
> something that seems to imply the TK50Z-GA is "incompatible"
> SCSI, and will
Well, I've never heard of anyone getting it to work with anything
else. :) You could try it. It's the one without the ID selector,
right?
I think the ID is fixed, since the other alternative is to pass
it through the cable, and that would be, well, interesting, to
say the least...
> only work on the MicroVax 2000. Can anyone confirm this
> either way? If it
> will work, what type of SCSI cable will I need - a standard
> one, or some
Should be a standard cable.
> proprietary one? If it won't work, is there any way to "fix"
> the TK50Z-GA so
> that it will? Thanks.
Um, yes, but it will require the internals from a tk50 drive that
will work ;) (Seriously, the drives are all the same, but some of
the logic that's packed in the case with them is different... so
I've heard.)
Chris
Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl Hacker.")."\x08!\n");
'
From: Ben Franchuk <bfranchuk(a)jetnet.ab.ca>
>Ken Seefried wrote:
>> Does anyone know of a free or cheap, usable meta-assembler for AMD 2901
>> microcode? Or anyone have one they want to get rid of?
>I don't there was such a beast (FREE or CHEAP) as most micro code
>designs could not use a standard assembler because of hardware
>variations.Any that were developed would be custom software.
There are, at least, AMDASM, MetaStep, Hale & MacASM. All of these are of
dubious free-ness and current status.
Ken
From: Pat Finnegan <pat(a)purdueriots.com>
> Is VENIX worth trying on this thing?
It's been a decade or more, but I recall Venix being a completely
serviceable Unix. More along the lines of V7 that anything you might run on
a PeeCee, but if you've got the inclination, I'd say give it a try.
Ken
> From: Christopher Smith
>
> <<File: ATT44037.txt>>
> > -----Original Message-----
> > From: Rod Young [mailto:rodyoung@shaw.ca]
>
> > So, I made the correct console (shorted pins 8-9) and presto,
>
> Sounds good.
>
> > I have a DELNI that was going to attach to the thickwire
> > port, but then
> > there's that cable issue. I think it's odd for the VS2000 to
> > have the posts
> > on the thickwire port... cuz it just doen't fit with the
>
> Actually, yes, it is -- I don't think that my 2000s are like
> that :) You could possibly open the case up and just remove the
> posts.
>
> > cables and DELNI
> > stuff I have. Must be a different cable out there for the
> > VS2000 thick wire
> > port. Oh well, I'll make it work!
>
> Or your port is just strange.
>
> Chris
>
Hey! I seem to recall having to add a clip to the AUI port on my
VAXStation 3100m38, so I could hooked up a transceiver. IIRC all computers'
with AUI ports, have the clip side, not the stud... Well, they're supposed
to, at least...
--
--- David A Woyciesjes
--- C & IS Support Specialist
--- Yale University Press
--- (203) 432-0953
--- ICQ # - 905818
Mac OS X 10.1 - Darwin Kernel Version 5
Running since 01/22/2002 without a crash
HEAVY as LEAD, and build for a nuclear war, IMHO. Pain to store too, as
they're huge.
Hi, Cameron.
Jim
Jim Brain, jbrain(a)aegonusa.com
"Researching tomorrow's decisions today."
(319) 369-2070 (work)
SYSTEMS ARCHITECT, ITS, AEGON FINANCIAL PARTNERS
-----Original Message-----
From: Cameron Kaiser [mailto:spectre@stockholm.ptloma.edu]
Sent: Wednesday, May 22, 2002 11:59 PM
To: cctalk(a)classiccmp.org
Subject: Re: Recent score: CBM 8032
> Wow wouldn't mind having one, as they are the grandaddy to the VIC-20
> and C=64 machines. Some VIC/64 software is directly useable, other
> software takes minor tweaks. Now you'll need the matching floppy
> drives, and they use that (typical commodore offbeat) IEEE interface. I
> guess use the common steps troubleshooting the p/s.
I've got a PET 2001-16B myself, and a C2N datasette. Works great.
To the original poster, yes, the power supply and/or fuse are likely
suspects. PETs are pretty tough systems.
--
----------------------------- personal page: http://www.armory.com/~spectre/
--
Cameron Kaiser, Point Loma Nazarene University *
ckaiser(a)stockholm.ptloma.edu
-- The world is coming to an end. Log off now.
--------------------------------
In a message dated 5/22/02 10:34:02 AM Pacific Daylight Time,
lemay(a)cs.umn.edu writes:
> Inside the box of floppies for the Intel MDS 800, was a single tape
> cartridge.
> Its a HP200, certified data cartridge, series 9800. Is this something that
> can be used with a MDS 800, or is it something that someone else needs?
>
Interesting. No, it is not usable with the MDS 800.
The tape cart is for the 98XX series of computer/calculators. It is also used
in the HP85s and with the tape drive for the HP41 calculators. IIRC it is
similar to the DC100 series of tape carts.
Paxton
Astoria, OR
> From: Louis Schulman <louiss(a)gate.net>
> Does anyone have a source for the above-mentioned (or equivalent) chip?
>
> Second question. Am I correct that a 74367 or 8T97 will substitute
> directly for a DM8097 hex tri-state buffer?
Don't know about the DM8835, but the '367 or 8T97 should work in place of
the DM8097.
Glen
0/0
The Surplus Exchange at 1107 Hickory KCMO has several floors of computer and
office surplus. They are normally open on Saturday but not on Sunday. I
just called and they will be closed for Memorial Day from 5 PM Friday
evening until 9 AM on Tuesday morning.
They receive all of the old computers from many of the Kansas City companies
and their branches throughout the Midwest. Lots of Mac stuff from Hallmark.
PS/2 stuff from IRS, DEC stuff from engineering firms.
If you are looking for specific stuff I may have some in my garage, which
needs cleaning. I live on a lake outside of town and the boat needs to hit
the water.
Mike
contact me off-list at mmcfadden at cmh dot edu
>
> I'll be in Kansas City this weekend. Can anyone syuggest any good classic
computer places to visit?
>
> Joe
! From: Doc [mailto:doc@mdrconsult.com]
!
! On Thu, 23 May 2002, Bob Lafleur wrote:
!
! > > It has a SCSI-I style (50pin amphelon) if that's what you mean by
! > non-mangled.
! >
! > 50-pin "amphenol" you mean... Is that like a 50-pin centronics? I've
! > basically seen either the 50-pin centronics, or the DB25 type.
!
! Oh, gods, here we go....
!
! Doc, limbering up his Delete Key
Methinks somebody needs to search the archives, to see what kind of
havoc the "amphenol and/or centronics usage" thread caused...
--- David A Woyciesjes
--- C & IS Support Specialist
--- Yale University Press
--- (203) 432-0953
--- ICQ # - 905818
Mac OS X 10.1.2 - Darwin Kernel Version 5.2:
Running since 01/22/2002 without a crash