test-drb November 2002

test-drb@ccmp.vtda.org

252 participants
556 discussions

by rmx_sys86＠hotmail.com

Hi guys!, Go easy on me, I'm new here and don't know the ropes yet :S I have an old Intel RMX Sys86/330 system (white cabinet)which I'd got working a few years back, but has fallen over again. All I'm really interested in is getting the data (mostly ASM source)on the hard drive onto a PC. I also have boxes full (heaps!) of 8" floppies for this system that I'd like to get the data off and over to a PC. I've searched classiccmp archives and google and can't find quite what I'm after, though I did find ppl trying to run 3.5" and 5.25" fdd's on 8" systems. What I'd like to be able to do is connect my 8" HDD to a PC and D/L all the data directly - likewise with the 8" FDD. Am I wasting my time, or is this possible? Making interfaces / electronics is no problem, and I have all the gear like CRO, logic probe, etc. Hard drive is - Priam Model 3450-10 8" HDD Floppy disk drive is - Mitsubishi Model M2894-63D June 83 8" FDD I believe this is DSDD based on some of the disks I have. Any help would be appreciated Regards Grant Mc :o) _________________________________________________________________ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. http://join.msn.com/?page=features/virus

21 years, 4 months

OT - Thinkpad 760CD

by Innfogra＠aol.com

Push the cover latches the other way from opening the top. This unlatches the keyboard which is hinged at the back and folds up from the front. The hard drive, battery and CD reside there. Pull the HD up from the back by the little wire handle. Usually you can replace the HD in the HD carrier. Paxton Astoria, OR

21 years, 4 months

DSSI cable needed

by rschaefe＠gcfn.org

Just picked up a R400X loaded with RF-72s (Thanks, Ethan!), includes a terminator but no cable. :( I want to plug it in to my VAX 4000 200, since that's the only VAX I have with DSSI. A DEC part number that starts with BC21M- is what I need, if anyone has a spare they'd like to part with. Thanks! Bob

21 years, 4 months

Selling it off. What would you keep ?

by pete＠dunnington.u-net.com

On Nov 30, 17:57, Fred N. van Kempen wrote: > > > I just wish the internet was around 10 years ago. > > > > Fortunately, it was. > Well, yes, but not everywhere, and _certainly_ not for everyone. By the late '80's it covered most of Western Europe and the States including non-academic sites. CIX (Compulink Information Exchange) was founded in 1987, and Demon Internet in June 1992, both offering public services in the UK. Demon charged UKP10/month for dialup access. -- Pete Peter Turnbull Network Manager University of York

21 years, 4 months

OT: _spam_

by Fred.van.Kempen＠microwalt.nl

Hi all, I have been checking some dates, and I'm quite sure that someone on this list isn't for real, but a spam-address-collector instead. If I post something on this list, I get spam pretty soon thereafter. And yes, I varied my sender address (a little), and it takes over that spelling. Can the ListMaster check on this, possibly by having us all do a manual "yes, I am here" reply or somesuch? Thanks, Fred

21 years, 4 months

IUP-200/201

by rigdonj＠cfl.rr.com

I have one that's not working and that I haven't had time to fix. They also show up on E-bay periodicly, in fact, I think one was on there just recently. I MAY have a manual for it, I'll have to look. Joe At 09:03 PM 11/30/02 +0100, you wrote: >I am looking for an old Intel unit, the IUP 200/201 universal prom >programmer, with software, and information how to use. I have the IUP-F87/51 >module and userguide, and a folder of the IUP-200/201 but not the programmer >it self. > >Gijs Meirmans >The Netherlands > >

21 years, 4 months

Microprofessr MPF-1 Manuals?

by glenslick＠hotmail.com

Does anyone have manuals for the MultiTech Microprofessor MPF-1B? This is a Z-80 single board computer with a keypad and six 7-segment LEDs for the display. I picked one up as my first Z-80 system to mess around with. I dumped the EPROM image and have started to unassemble it, but of course it would be quicker to just read the monitor source if someone has a copy of the monitor listing manual. I suppose I would learn more figuring out how it works on my on than by reading the manuals. I did some web searching and couldn't find manuals anywhere, but apparently these are still being made today by a UK company that acquired the rights to the design. http://www.flite.co.uk/micros/mpf-1b.html Actually what I really have is an E&L Insturments FOX MT-80Z which is a MPF-1B grafted to an expansion board with a prototype area. I can't find any docs on the web for those either. _________________________________________________________________ Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail

21 years, 4 months

The internet 10 years ago (was Re: Selling it off. What would you keep ?)

by pete＠dunnington.u-net.com

On Nov 30, 10:34, Ethan Dicks wrote: > 10 years ago, I was doing Usenet and email through my Amiga (with two > ST225s and a PC-XT disk controller!) with UUCP. I couldn't do ftp > and telnet and cool stuff like that, but I could at least get a few > newsgroups like comp.sources.amiga and rec.humor.funny delivered to my > door. > > 2400 bps, 20 MB news spool! Those were the days. Not. Ten years ago, I was still relying on bulletin boards most of the time. I well remember using the dialup provided by Lancaster University (what was HENSA and is now the UK Mirror service), and realising that some distribution I needed was going to take several hours to download. Luckily, I had a friend at York who could use FTP over a JANET link :-) -- Pete Peter Turnbull Network Manager University of York

21 years, 4 months

Selling it off. What would you keep ?

by pete＠dunnington.u-net.com

On Nov 30, 19:31, Fred N. van Kempen wrote: > For regular people, I doubt one could get a decent and affordable conn in > 1992 in the UK, Pete. Thats why Cliff started doing UUCP first :) But you *could* -- that was my point. In 1992, Demon made that possible with dialup IP (not UUCP), and it grew very quickly, from an initial base of 200 users. At least one of my friends had an account back then -- I know, because I used it. And by 1994 when I started at York University, Demon Internet was well enough established that several students had dialup accounts, and other companies had followed Demon's lead and produced a very competitive market. CIX did it before that, though it was restricted, as you suggest. And I'm not sure when they moved from UUCP to whatever else they did. The company I worked for at the time had .co.uk accounts in 1989 or 1990 (but I don't know who the provider was). -- Pete Peter Turnbull Network Manager University of York

21 years, 4 months

Free to a good home - Tricom Custodian II Network Security System - UK

by dave＠naffnet.org.uk

I have a Tricom Custodian II Network Security System (dialback system) that needs a good home. The system has redundant power supplies, one Supervisory Module and four Line Modules to give dialback on eight lines. Cables and manual included. Available for shipping costs only, or delivered for a couple of pints if you are local to me (East Berkshire). Cheers, Dave.

21 years, 4 months

← Newer
1
2
3
4
5
6
7
...
56
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb November 2002