Earlier today, I had Mintaka (Cromemco System Two) opened up and had
her cards pulled so I could write down an inventory of what all she
has in her. I noticed that on the FDC16 floppy controller, there is
a wire plugged into a 2 pin connector on the card. The other end of
the wire is not connected to anything. Any idea what it is supposed
to go to? Here is a picture of the wire and connector in question...
http://www.oz.net/~otter/Geekware/What-is-This-Connector-0.JPG
I also noticed that the TU-ART card has a similar 2 pin connector,
with nothing attached to it.
http://www.oz.net/~otter/Geekware/What-is-This-Connector-1.JPG
Is that where the other end of the wire is supposed to go? And if
so, what about that connector in the middle of the wire?
Thanks
-- Scarletdown
Hi,
I have a Heathkit H-8 of which I know nothing about. I am curious to play
with this machine a bit but really I don't know where to start.
I believe all I have for the H-8 is the computer - the part with the keypad
& led display & a bunch of cables.
What can I do with this? How can I test to see if it even works? Any ideas
where I could go to find more information about it?
Thanks all!
Chris Lamrock
Hi all,
Just found this on The Register - thought some of you might be
interested.
World's Most Dangerous Server Rooms - Finally Revealed! (my title, not
theirs)
http://www.theregister.co.uk/content/28/27684.html
I like this one
[quote]
We shall not name the world-renowned North American educational institution
in which the server room itself is now out of bounds:-
[endquote]
I'm not going to spoil the fun by telling you what the sign on the server
room door says :-)
Later.
--
Phil.
philpem(a)dsl.pipex.com
http://www.philpem.dsl.pipex.com/
More info for Sellam
http://www.geocities.com/darrenmilford/scuttle.html
Bayern as raised in 1933. She fetched a scrap value of ?110,000 nearly half
of which was profit. The salvage operations on the various ships started in
the early 1920's with most of the ships having been raised by the late
1930's. Since then fragments of ships have been raised and since Hiroshima
they remain an important source of quality radioactive free metals necessary
for certain types of sensitive scientific instruments
http://users.accesscomm.ca/shipwreck/index7.htm
Radioactivity in the atmosphere has increased over time with the continual
testing of atomic bombs of all types. Steel makers need vast amounts of air
to make steel so it would follow that steel made nowadays contains certain
amounts of radioactivity. Prior to dropping the first A bomb in 1945, steel
was radioactive free, and the only source of this 'clean' steel left lies in
pre 1945 wrecks that lie on the seabed.
Mike
Sellam Ismail was asking about "clean steel", here is some of what I
know/remember from one of the applications that require it.
The trace amounts of radioactive "stuff" in the new steel can swamp out the
radioactive particle counters on some experiments.
There was an experiment at the University of Missouri to look at the
muscle/fat percentages in humans and in cows.
There was an especially built building made from "old battleship steel" that
enclosed the radioactive particle counter. The "experimental subject" was
given trace amounts of radioactive potassium which would be incorporated
into their muscle. The entire subject was then placed in a whole body
detector to determine the percentage of the body mass that was muscle versus
fat.
I heard that they had gotten the steel from an old sunken ship.
may be entirely myth
Thanks
Mike
Just wandering around the web last night, and I was wondering 'what
happened' to RICM's Astronautics ZS-1 ... has it yet been powered up,
booted and put through its paces? While I was at Astronautics with Merle,
(and everyone else), it looked like a fine machine that would be fun to
play around with once it got up and running, and, well, I was just curious
if it's been set up and successfully ran any software since it was moved.
Pat
--
"This fucking university has shown time and time again that it is
completely fucking incompetent when it comes to employing technology"
-- Anonymous
http://dilbert.com/comics/dilbert/archive/images/dilbert2040637020924.gif
At 02:47 AM 16/10/2002 -0500, Tothwolf wrote:
>If you notice the car on the left of the image, it gives two clues that
>show the location is in the US somewhere. The license plate, even though
>you can't see all of it, is US sized. The steering wheel is also on the
>left side of the car. Another noticeable item in the photo is the DSS dish
>on the roof of the red brick building.
I'm inclined to agree that this photo is from the US, but of course the
majority
of cars in Europe have the steering wheel on the left hand side of the car. If
the UK is anything to go by, there are lots of satellite dishes there too...
Huw Davies | e-mail: Huw.Davies(a)kerberos.davies.net.au
| "If God had wanted soccer played in the
| air, the sky would be painted green"
If I provide pictures and a descriptions of the various chips, would
anyone here be able to help me identify this S-100 card? First, the
pictures:
http://www.oz.net/~otter/Geekware/Mystery-Board-Front.JPGhttp://www.oz.net/~otter/Geekware/Mystery-Board-Back.JPG
The largest chip is marked: AM9513PC 8148HP (c) 1980 AMD.
To the right of the DIP switches are 4 socketed chips...
The two smaller ones: F-74LS136PC 7935 Singapore
The two larger ones: 74LS244 PC F 8226 Indonesia
The other 9 chips, in no particular order...
F-74LS368PC 7918 Indonesia
SN74LS00n QQ8130 (has Motorola Logo)
74LS02 PC 8221 Singapore
F-74LS32PC 8210 Indonesia
435 DM7476N
74LS14 F 8248 Singapore
2630 937 (has Hewlett Packard Logo)
4N26 240F Korea
4N26 231F Korea
I'm assuming that this is a homebrew job. But before I make a
decision on whether or not to stick it in Mintaka, or sell it, I
really would like to know what this card is for.
Anyone have any idea?
Thanks
-- Scarletdown
Hello one and all.
For the past three or four years, I've actively been looking for a first
generation Wang 2200 computer. I actually have two now, mostly
working. Over the past couple of months I acquired/developed all the
technical information I needed to write an emulator.
The emulator is far from complete, but it is quite usable. Besides the
emulator, I've overhauled my Wang web site and added a lot more
content. Now that the ball is rolling, I hope to maintain it more actively.
The web site:
http://www.thebattles.net/wang/wang.html
The emulator:
http://www.thebattles.net/wang/emu.html
The emulator runs on win32 platforms right now, but I wrote it using a
GUI/system abstraction toolkit, wxWindows, so it should be pretty portable
to unix/linux/mac at least.
If you have no nostalgia for the 2200, why is it interesting anyway? The
first generation came out in 1973. Because it was designed before
microprocessors were available, it is a microcoded TTL box. In many ways,
it can be compared pretty fairly to home computers that came five years
later. Because it predates Microsoft, it has a rich and quirky BASIC dialect.
Unfortunately, I don't have any Wang BASIC documents online yet, but I do
have a quick comparison of Wang BASIC vs early Microsoft BASIC.
-----
Jim Battle == frustum(a)pacbell.net
Does anyone have a Corvus Mirror? This was a VHS tape backup unit for the
Corvus hard drive.
Pictures and info here:
http://209.122.187.156:8082/corvus.html
If you have one, please contact me privately at <sellam(a)vintage.org>.
Thanks!
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *