Well, I got irritated with the keyboard (ever try to use vi without
the Escape key) and jerked it apart. Very gently.
1) I'm certain that it's re-badged OEM, not IBM-built. All the screws,
internal and external, are Phillips.
2) It's not a double membrane, it's rubber cups over a PCB, with foil
inserts in the caps. The traces on the PCB were covered with
unidentified goop. *Only* under the Escape key. I dunno.
3) It works now.
4) Thanks, Tony. Even though this one bore no resemblance to your
instructions, sometimes *thinking* you have a clue is as good as
the real thing.
On to TCP/IP, NFS, and maybe a game or two of hangman.
Speaking of hangman, is it just me, or is the NetBSD port of hangman
purely evil? Come on, now. "Prolegomenous?" Seriously, I've played
hangman on a bunch of different Unices, and the recent NetBSD hangman is
by far the hardest I've ever seen.
Doc
At 04:28 PM 1/26/2002 -0600, Tothwolf wrote:
> I do have a problem
>with wannabe dealers messing up the local auctions by bidding things up
>higher then they are worth, and then trying unsuccessfully to sell them at
>extremely high prices on ebay.
You haven't been to enough auctions. You'll get over it. :-)
- John
Hi. I'm wondering if anyone has any documentation for the docking
station for a Toshiba T4800CT laptop. I'm embarassed to admit that I
can't even figure out how to access the drive bay on the station.
For those of you with extensive collections (or access to extensive
documentation libraries), the part number for the docking station is
PA2701U, and it's called a "Desk Station IV."
Thanks in advance.
PB Schechter
At 02:07 PM 1/26/2002 -0600, Tothwolf wrote:
>What I am saying, is that I often see idiot wannabe dealers overpay for
>*junk* at the local auctions, not even knowing what they are buying, all
>the while thinking they can make a fast buck off of "suckers" on ebay.
This behavior is self-limiting due to finite pocketbooks.
We can't make the poor go away, and we can't prevent
poor business sense.
>Again, what I am getting at is ebay itself has spawned a whole new
>generation of get-rich-quick idiots who buy up stuff at local auctions for
>inflated prices and try to sell it at an even higher price on ebay.
And that's all because you *can* make money buying low
and selling high, depending on exactly what it is that
you can become expert enough to acquire and sell.
There's been plenty of times when I've bought something
for $100 or less and sold it for $1000 or more.
I may be getting old, but that's exciting.
- John
In a message dated 25/01/02 18:11:34 Pacific Standard Time,
vaxzilla(a)jarai.org writes:
> > > Cmon, what could possibly be less valuable than an Apple ][+? A C64
> > > perhaps...
>
Apple ][ are not that common in the UK. To me an HP85 that chews tapes
would be less valuable than an Apple ][
Chris
Please see below.
> From: Don Maslin <donm(a)cts.com>
> Date: Thursday, January 24, 2002 2:55 PM
>
> On Thu, 24 Jan 2002, Glen Goodwin wrote:
>
> > Although I have (I believe) all of the manuals for the Zenith Z-100
(not
> > Z-100 pc), I cannot find any reference to the serial ports on this box.
> >
> > What are the addresses of the DTE and DCE ports? I'd like to write
some
> > assembly code to access these devices (under CP/M-86) but want to
control
> > them at the hardware level instead of making BDOS calls.
> The overlay for MEX (CP/M-80) says that the modem port - presumably
> DTE - is 0D8H. It does not mention the DCE port. Do both processors
> share the same seriak and parallel ports?
> - don
2nd question first -- yes, the same ports are used regardless of the MPU.
1st question -- found some info in the 2nd manual under "programming data"
(I was looking for *hardware" data!):
2661 Serial A (Printer Port) 0E8-0EB
2661 Serial B (Modem Port) 0EC-0EF
Now I need to know exactly what the control and data addresses for these
ports are. Maybe the first number is data and the second control, or the
other way around? I'm not familiar with the 2661 -- any pointers?
Hey -- I'll bet Tony knows!
Thanks again,
Glen
0/0
On Jan 24, 15:34, Jeffrey S. Sharp wrote:
> Lawrence LeMay said:
> > Cmon, what could possibly be less valuable than an Apple ][+? A C64
> > perhaps...
>
> Old printer ribbons.
No, you can re-ink printer ribbons :-)
--
Pete Peter Turnbull
Network Manager
University of York
At 09:09 PM 1/25/2002 -0600, Tothwolf wrote:
>I was quite sick when I saw the seller trying to sell these off to
>uneducated buyers on ebay for $50 each. If someone had indeed bought one
>at that price, they would have been tempted to try to repair it when it
>did not work. People qualified to work on these units would tend to be
>educated buyers and not even consider paying $50 for a dead unit.
What are you suggesting? That a warning label might've
saved their lives, or just saved them from parting from their
cash? Or that the auctioneer's job is to accurately
represent the state of each gizmo, as opposed to saying "all
sales as-is and final", which is far easier and still manages
to attract plenty of buyers.
(This reminds me of the old marketing joke "If Company X
was in charge of Kentucky Fried Chicken, they'd call the
product "Hot Dead Chicken." Just to keep it on-topic,
I know this joke was repeated quite often in the Commodore
market over the years.)
The whole point of an auction is that it's a good way to
maximize profit while making a big pile of junk disappear.
Evaluating the goods (accurately or professionally) and
warning the buyers about nitpicks isn't profitable.
Maybe someone buys dead UPSes to recover the lead in the
batteries, who knows.
And auctions are great fun for game theorists and economists,
many of whom have made careers and won gold medals for determining
nifty phenomena such as the way that the winner tends to overpay.
- John
On January 26, SUPRDAVE(a)aol.com wrote:
> > Wouldn't it be easier to run diags?
>
> It might, but I don't have any. The big pile of RT disks that I got
> from BSD Bob were mistakenly left in a storage locker in Maryland, and
> I won't be able to get to them for at least another month. :-( >>
>
> I think I have a diagnostice floppy somewhere that I found in a stack of
> unrelated floppies. Talk about serendipity! I guess regular old diskcopy
> would work on them.
Doc put some images up on his FTP server for me. Thanks for the
thought, though. :-)
-Dave
--
Dave McGuire
St. Petersburg, FL "Less talk. More synthohol." --Lt. Worf
I don't know if it is valuable and/or collectible, but for those interested in
old games consoles :
a complete looking 1975 Atari anti-aircraft game is available at a local
Salvation Army shop.
(Local is : Zurich, Switzerland .
jos Dreesen