Hey, based on what some folks were saying on list earlier in the month, I
grabbed a small quantity of RS/6000 cables, which I'm offering for my cost
($2) plus shipping.
FRU 74F3135
10-pin ("dual5") plug <-> miniDIN-8
I can't speculate as to what its original purpose might've been, but
perhaps some of you might find it useful for your older RS/6000s.
ok
r.
Hi
I'm trying to get a Molecular going. it has Bad disk controller. WD
1001 55
Does anyone have one of theses that they can spare.
I have 1000 series But there is a difference.
E-mail me at address below
Thanks, Jerry
Jerry Wright
JLC inc.
g-wright(a)worldnet.att.net (new)
On Jan 29, 10:14, Christopher Smith wrote:
> > -----Original Message-----
> > From: pete(a)dunnington.u-net.com [mailto:pete@dunnington.u-net.com]
>
> > "4", etc. If
> > only the keyboard test fails, the terminal should go online
> > in receive-only
> > mode (ie it's useful as a display).
>
> It does that... :) Would like to type things, though.
You seem to have the "look, don't touch option" favoured by some museums.
--
Pete Peter Turnbull
Network Manager
University of York
> -----Original Message-----
> From: Mike Ford [mailto:mikeford@socal.rr.com]
> How many people on this list still have their 1st computer?
> second? third?
> every computer you ever used/owned?
Well, the first computer I used was an apple II+, and a IIe
after that. I have one of each now, but not the same model.
My parents owned a TRS-80 color computer, then a Sperry PC
compatible machine, neither of which I have at this point.
They also had a "Leading Technology" 386, and a Compaq 486,
neither of which I would want, since I have my share of that
class of machine.
The first computer _I_ ever owned was an AT&T Unix PC, and
yes, I still have that. You could say that was my
introduction to collecting "classic computers." It was more
than 10 years old by the time I got it, and required some
work to get it running. It was rescued from the trash. Its
name is "Sprite" -- so called after the drink, since its
green screen contrasted sharply with all other computers I'd
seen recently (at that time). I was just working on it over
this last weekend.
Regards,
Chris
Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl Hacker.")."\x08!\n");
'
On Jan 29, 6:56, Ethan Dicks wrote:
>
> --- Russ Blakeman <rhblakeman(a)kih.net> wrote:
> > What jetdirect cards are you looking for - in other words for which HP
> > printers? I work in these things all the time and come across sources
of
> > various ones from time to time. Also which ethernet - 10baseT, 10/100?
> > With BNC or without?
>
> Personally, _I'm_ looking for an HP JetDirect card for my LJ-IIID. I'd
> prefer 10BaseT over 10Base2. I wouldn't say no to a 10/100 card, but I
> doubt there was one for this old printer.
I think some of the later cards do fit, probably ones for a LaserJet V.
> The card I'm looking for should have multi-protocol support - Unix,
> Apple and PeeCee. If I had a part number, I'd list it, but I know
> they made such things.
The normal interfaces were J2550A (10baseT only), J2552A
(10baseT/10base2/Localtalk), J2555A (Token Ring). You can upgrade the
firmware if it's very old, and it does support all the common protocols
(lpr, Novell, Applesquawk, ...). Whether the printer/interface supports
them all *at the same time* depends on the printer, not the interface.
Some printers, like the IIISi, LJ4/4M and most DesignJets are
single-protocol and can only be configured to handle one at a time; if you
want to use a different protocol you have to reconfigure the printer.
Others, like the 4Si and later, and my DeskJet 1600, can handle all at the
same time, and switch between them according to what arrives on the
interface(s).
--
Pete Peter Turnbull
Network Manager
University of York
Does anyone know anything about the item above? I've seen these before
but this is the first one that I've found with the pod and this one seems
to work. I've posted a picture at
<http://www.classiccmp.org/hp/app-u-sy.jpg> . I know it's big but I wanted
to capture as much detail as possible.
joe
Has anyone been able to access the site they claimed had it for download?
I've wanted a copy of this since it came out! Does Symantec have their own
download site?
Zane
>
> No wonder has mentioned this, so I thought I would throw it into the Classic
> mixer:
>
> http://slashdot.org/articles/02/01/27/1950244.shtml
> Quote:
> "It seems Symantec (purchasers of former company Quarterdeck) has release
> DeskView/X into public domain and can be downloaded now. DesqView/X was a
Sellam Ismail <foo(a)siconic.com> wrote:
> Oh yeah? Well, I've got the original Hayes modem product: the DC Hayes
> modem for the S-100 bus :)
Hayes made two modems for the S-100 bus. The first (ca. 1978) was the
80-103A, the second was the Micromodem 100 (using the same
Microcoupler as the original Micromodem II for the Apple).
-Frank McConnell
Sellam Ismail <foo(a)siconic.com> wrote:
> I did recall that the Micromodel 100 used the Microcoupler but then I
> remembered the 80-103A didn't. The 80-103A used a device (which I'm now
> forgetting the name of--damn cold) that you had to get from the phone
> company in order to use it, back in the days of Ma Bell who was oh so
> strict and oh so paranoid about what you plugged into her.
DAA, short for Data Access Arrangement.
-Frank McConnell