> ard(a)p850ug1.demon.co.uk wrote:
>
>The book you _must_ get is 'The Art of Electronics' by Paul
Horowitz and
>Winfield Hill.
Seconded and thirded :-)
I also like A Practical Introduction to
Electronic Circuits by Martin Hartley Jones.
Electronics for Engineers by Ahmed and Spreadbury
is quite good too.
Antonio
Hello, all:
I was able to get my hands on the two DOS 1.0 disks. So, I spent a
few minutes with Sourcer and a good hex editor in search of the DR copyright
notice. I didn't find it.
Maybe I misunderstood the timing of the message, but I thought that
the 1.0 version of DOS contained copyright information from Digital Research
and when IBM found out, they compelled MS to expunge it, resulting in the
1.1 version.
The file dates are as follows:
c:\>dir a:
Volume in drive A is 3COM53_D1
Volume Serial Number is 11DC-3A5E
Directory of A:\
07/23/81 12:00a 1,920 IBMBIO.COM ***
08/04/81 12:00a 3,231 COMMAND.COM ***
08/13/81 12:00a 6,400 IBMDOS.COM ***
09/10/01 09:28a 66,235 COMMAND.LST
09/10/01 09:27a 4,374 IBMBIO.SDF
09/10/01 09:28a 143,874 IBMDOS.LST
09/10/01 09:28a 16,231 IBMDOS.SDF
09/10/01 09:27a 25,780 IBMBIO.LST
09/10/01 09:28a 10,141 COMMAND.SDF
9 File(s) 278,186 bytes
1,177,088 bytes free
The files are all dated before the PC's release. I find it
interesting that the file date for DOS proper was one week before the PC
announcement. Microsoft tweaking until the last minute.
IBMBIO contains only a revision mark and no copyright notice. IBMDOS
contains a header common to all versions of DOS ("M;S<>=~KRAA") and no
copyright notice. COMMAND contains a copyright message which is the one
probably displayed upon execution:
The IBM Personal Computer DOS
Version 1.00
(C)Copyright IBM Corp 1981
Licensed Material - Program Property of IBM
So, where did I go wrong??
Rich
==========================
Richard A. Cini, Jr.
Congress Financial Corporation
1133 Avenue of the Americas
30th Floor
New York, NY 10036
(212) 545-4402
(212) 840-6259 (facsimile)
I'd like to get some recommendations from the list for a good introductory
electronics book for my 14 year-old son. He's interested in building an
intercom system (and other circuits) that he got off the Web, and I would
like something for him to read that will give him a good understanding of
how the circuit works. (For example, it uses the primary windings of a
120V:12V transformer as a coil.) TIA.
FWIW, I did once correspond with the Catweasel guy and he said it would
do N* 10-hole hard-sectored disks, but he had never had a request or
seen a N* disk. I was supposed to send him some samples but never got a
round tuit.
And don't forget, it has already been done - the Microsolutions
MatchPoint card allows your PC to read N* disks. Of course, just try to
find one!
If it provides motivation for one of you hardware types with nothing
better to do, I'd lend my support to requesting an add-in card which
could handle the 10 and 16 hole 5.25" disks and the 32 hole 8 inchers as
well (I have a lot of ProcTech Helios disks).
Bob Stek
Saver of Lost Sols
> >>Hello-
> >>I have been pursuuing the OpenVMS license and media for
> >>about 6 months with no success.
> >>i.e.
> >>http://www.openvms.compaq.com/openvms/freeware/
> >>http://www.montagar.com/dfwlug/openvms-faq.html
> >>I have an AlphaStation 200/233 that I would like to install
> >>OpenVMS to.
> >>Do you have any ideas on how I get a copy through legal
> >>or hobbiest channels?
>
>
> Something to note is that the VMS licenses from the Hobbyist program will
> work on VMS 5.x and beyond, they will _not_ work on VMS 4.x (the LMF
> changed significantly between 4.x and 5.x). However, since most "classic"
> folks will want to use VMS 5.5x (all MicroVAXen before the 4000 series) or
> 6.x (includes the 4000s) that should be fine. Also the older ConDists sell
> for reasonable amounts on Ebay. Further, there is nothing particularly
> "special" about the ConDist and they can be copied using a modern CD burner
> on a PC using an image copy and work just fine (this was how I got my first
> ConDist)
LMF was introduced with VMS 5.0. Before that the licenses were actuall patch
files.
--
Eric Dittman
dittman(a)dittman.net
Check out the DEC Ethusiasts Club at http://www.dittman.net/
It's been a wet week in Stockholm, but nevertheless, thanks to the waste
management of the technical university, we've managed to scrounge together
some interesting pieces.
A lot of HP things, mainly HIL mice and keyboards, much to my joy, since I can
now use my 9000/380. But what does a HIL ID module do?
We also found a more or less complete 9000/425 system (no hard drives, but a
monitor and two tape drives which were buried too deep for us to get at).
Then we found an Apple II clone by Copam, which I've previously thought was
just a soul-less PC clone manufacturer. Now it turns out that they were once a
soul-less Apple clone manufacturer as well. =)
The unit is called the Base-64A, which sounds supiciously like a MIME
encoding, and it's got a floppy drive, too.
The Base-64 was perched atop some old cabinet with a lot of rain in it and
warning labels about the Winchester drive, which is a hulking full-height
fourteen-inch unit. I found a card outside the cabinet which looked like a
full- height QBus card. It's got two AMD 2901s, which is a bit-slice
processor. Another (half-height) card was left inside the cabinet, it, too,
featuring a pair of 2901s.
Because we were already loaded, and because of the rain and the size of the
thing, we decided to leave it behind, but I took the card I'd found with me
for further identification.
The card and the cabinet are made by Plessey Peripheral Systems, and my quick
research indicates that this is some PDP-11 (or should it be an LSI-11?)
clone.
Will those two cards we found really suffice for a functioning system? Four
2901s should only add up to four bits according to my calculations...
There was a lot of old terminals there as well, but I've got enough of those
already. It was rather interesting to see an old Tandberg terminal of ours,
though, only branded with the Norsk Data label andfeaturing an orange colour
scheme instead of Tandberg's brown/beige. I suppose it's been hooked up to
some Nord mini once upon a time.
--
En ligne avec Thor 2.6a.
"Computer games don't affect kids, I mean if Pac Man affected us as kids, we'd
all be running around in darkened rooms, munching pills and listening to
repetitive music."
David McMinn
I was successful in finding not only a 4052 with 4662 multipen plotter and
4631 hard copy unit (lots of internet searching) - but also a 4054 on EBAY!
I got the 4052 working after repairing the tape drive board and cleaning the
tape heads.
The 4631 needed new paper and one of the toothed belts - got both and it
works fine.
The 4054 repair consisted of replacing one of the 16k bit DRAMs!
I have also added two Tektronix 4041 GPIB controllers with one line LED
displays and built in thermal printers.
I now have quite a collection of 4050 and 4041 series tapes - some with my
old programs from the late 70's in the USAF, some including the Tek System
Tapes and some game tapes, also some of the 4052 cartridges.
Sorry, at this point I'm interested in keeping my collection. Contact me
direct if you are interested in any tapes, though.
Monty McGraw
Spring, TX (near Houston)
In a message dated 9/10/01 2:02:52 PM Eastern Daylight Time,
sieler(a)allegro.com writes:
> Hi,
>
> Is anyone is interested in a free,
> working Micro 3000 XE (desktop size Classic
> HP 3000), complete with disks, tape drive
> ... and is willing to pick it up (or pay to have it picked up),
> please contact me soon.
>
> Disk drives: HP 7958, and HP 7936.
> Tape drive: HP 35401 (9144 cartridge tape auto changer)
> MPE Version is V-Delta 5.
>
> It's in Lebanon, New Jersey, off of Route 78.
>
> thanks,
>
> Stan
I would be interested possibly. I dont know a thing about them though. I
live right off of 78 in Easton PA.
-Linc Fessenden
In The Beginning there was nothing, which exploded - Yeah right...
Calculating in binary code is as easy as 01,10,11.
On September 5, Absurdly Obtuse wrote:
> > In 1998 the book, A Guide to Collecting Computers and Computer Collectibles:
> > History, Technique, and Practice was published. An abridged edition is now
> > available at: www.unusual.on.ca/guidecollectcomputer
> >
> > Your comments are invited as are any hints where I might find a complete
> > 370/165 or 168. I'm forever hoping.
>
> What kind of systems are these? I will keep my eyes open. If you are
> talking IBM big-iron, that can be arranged. *evil grin*
I saw a 370/168 once. I'd swear it was the single largest computer
I've ever seen. The building it was in had a disk drive *floor*.
I had to use bleach on that underwear.
-Dave
--
Dave McGuire
Laurel, MD
> > you should really dump the license PAK's and print them out!
>
> I don't get this. Isn't this like walking up to a combination lock
> and saying "SHOW COMBINATION". Shouldn't be possible,
> should it?
No, this isn't the same. These are licenses, not locks. If anyone is
curious, the command is "LICENSE ISSUE xxx", and issuing the license
disables it, so you have to "LICENSE ENABLE xxx" to reenable. Also,
I'd recommend using the /OUTPUT qualifier if you are going to print
the licenses and using both /OUTPUT and /PROCEDURE if you want a copy
that you can easily reload later.
--
Eric Dittman
dittman(a)dittman.net
Check out the DEC Ethusiasts Club at http://www.dittman.net/