This is two years late, but the terminal the original poster describes
sounds like an IST (model 1), a CRT-based CDC product, vintage about 1978.
There was a later edition called the IST-II, also CDC. It had two 8" drives
and a Z-80 CPU, as well as connectivity to CDC PLATO mainframe systems,
either by dialup modem (1200 bps) or multiplexer.
The IST is not the oldest PLATO terminal, but it is the oldest that CDC
manufactured, I suspect. Even my PLATO IV (Magnavox, 1971) is not the
oldest, but only the first mass-produced machine. The earliest ones date to
about 1961 and there are probably only two or three still in existence, if
we're lucky enough to have that many. A precursor to these would be Norman
Crowder's Auto-Tutor, vintage about 1958, which has characteristics very
similar to the PLATO terminals (though it is not a computer terminal, it
operates on filmstrip media), and PLATO's mechanisms are said to have been
influenced by this machine.
Peter Zelchenko (pete(a)suba.com)
Chicago, Illinois
On July 9, Glenatacme(a)aol.com wrote:
> IMHO it's crazy to be on a motorcycle without a helmet, so why not just
> abandon the helmet requirement and let Darwin have the last word . . .
Because our society and government are built around protecting the
stupid.
-Dave McGuire
It's been nearly a decade since I really dealt with MicroVAXen,
but I came across a guy who has the following:
MicroVAX 3600
uVAX 1000
RA81 (2)
RA90
and some miscellaneous cards, in four cabinets. He got them
in as part of a truckload of de-installed equipment and doesn't
have any idea what they're worth. I'm at a loss as to what to
offer for them, other than (of course) the lowest possible price.
Any ideas on the going rate for this type of DEC equipment?
He's also got a DEC MicroServer and some VT 510's.
The guy was nice enough to give me an RL02K-DC removable
disk pack (since he didn't know what it was or what it worked
in), so he seems easy to deal with. (The disk pack did not
come with the MicroVAX stuff.)
Cheers,
Dan
--- Mike Ford wrote:
Recall uses the serial number of the G3, nothing apparently on the adapter
needed.
--- end of quote ---
Actually, it asks for the adapter serial number after it checks your G3 serial number.
They say to send back the old one in the prepaid envelope...will they send thugs to beat me up if I keep both? ;)
-- MB
Hi,
I've just seen an article on using a NEC D4164 dynamic RAM as a quick
and dirty image sensor - I'm specifically after the version that had a brass
cover. Prices negotiable. I'm after five or more of the little buggers (two
to practise removal tactics on, the rest to modify and hook up to different
computers). Alternatively, if someone's got a Micron IS32 going spare, I'd
be happy to take it off their hands :-)
Thanks.
--
Phil.
philpem(a)bigfoot.com
http://www.philpem.f9.co.uk/
I worked at Ford designing the software for the test-stand that tested the
modules 10 years or so ago. Whadya want to know?
Gary
> Date: Tue, 10 Jul 2001 18:10:56 -0600 (MDT)
> From: "Clint Wolff (VAX collector)" <vaxman(a)qwest.net>
> Subject: Ford EEC-IV
> Anyone got any info? My car (1990) has one, and I'm curious... Not
> curious enough to risk killing my car though.
> Clint
Hi,
I acquired Chad Fernandez's Cipher C8803 tape drive (and with it a lifetime
supply of foam peanuts). (Thanks, Chad! Got the drive, the QBus adapter is on
its way.)
Does anyone have documentation and/or cabling and interface info (physical
and/or software) for this drive? Or know of a scanned or other online
reference for it? From what I read, Seagate ate Connor ate Archive ate Cipher
and there's nothing left.
Cipher Tape drive (open reel streamer)
Model C880340-96-15250
Part Number 961210-001 Option B
Thanks,
Brian
Dig out your old BYTE magazines and look for an early Circuit Cellar
article about X-Y plotting. In it you will find a picture of a Heathkit
IO-105 dual-trace 'scope. Well friends, THAT VERY SAME 'scope can be
YOURS! This scope was PERSONALLY owned by Steve Ciarcia and became a
fixture at the Circuit Cellar (even has a BEAUTIFUL, PROFESSIONALLY
CRAFTED Circuit Cellar mylar sticker adorning the case) - and for an
extra $5 I think I can get him to autograph it with an engraving tool
ANYWHERE YOU WANT ON THE CASE!!!
(sorry - seeing that post about DAK making a comeback has obviously done
strange things to my brain)
All seriousness aside, I got this from Steve, and it is in very good
condition with only one small problem - it immediately blows its fuse
whenever you turn it on. I loved Heathkits - they were just my speed -
I could follow instructions, measure and cut wire, and I could grab the
cool end of a soldering iron over 60% of the time. But without a manual
and with no formal or informal training in electronics, to me it's just
a boat anchor. I was going to toss it, but if anyone wants it, I can A)
bring it to VCF East, or B) have it packed and shipped (it's heavy,
bulky and obviously at least the tube itself is breakable). Just to
make thing things interesting, anyone who can offer me a book, old
computer magazine, Infocom CP/M disk or manual, NEC V-20, anything
vaguely CP/M or 8080 / Z-80 /S-100 related, it's yours. No takers - its
off to SallyAnn or Good Will (with a note attached stating its
fuse-blowing propensity). Decision by the judges is final. Offer good
only as long as I feel like it. For a list of the winner, send a SASE
to:
Bob Stek
Saver of Lost Sols
I'm still sitting on a pile of vintage machines (wife continues to say the
"sea of beige" has to go! Two boxed up and ready to go ain't enough):
Keyboards, cables and rodents included with the following if you desire.
(5) IIsi 5/80 (might even be a 9/80 in the pile...) $10ea.
(2) Plus $10ea. $30 with correct 20-40mb external
(no scsi cable included though.)
512K $25 (in negotiation)
LC $10
(2) LC III $15ea.
IIci $15 <sale pending>
IIcx $10
LC 520 $45
IIfx w/ 25Mhz Rocket and fast scsi daughtercard, 8*24GC $50 <sale pending>
C650 (stock with Q650 specs 33Mhz & math. go figure...) $25
Esoterica:
Apple Personal Modem (1400 baud) Period accessory for IIe/c/128/512/Plus
collectors. $10
Apple Adjustable Keyboard (complete but non-functional) $5
128/512/Plus 10-key keypad $5
Localtalk tranceivers $5/pr.
Imagewriter $10
12" monitors $20
Bernoulli Transportable 90 with 4 disks (Has some interesting s/w on a
couple of them) $45
A bunch of HP plotter pens of various types and colors $50 gets the FULL
12" x 16" x 7" box
I also have a few ethernet cards for vintage Macs if anyone is looking.
All are used/tested. They fit:
(2) IIsi
(1) SE/30
(1) LC III
$15 ea
All prices are exclusive of shipping. I prefer USPS but since you'll be
paying the freight, you get to choose.
Jim